735P205X5400H [VISHAY]

CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 400V, 2uF, CHASSIS MOUNT, AXIAL LEADED;


型号：	735P205X5400H
厂家：	VISHAY
描述：	CAPACITOR, METALLIZED FILM, POLYPROPYLENE, 400V, 2uF, CHASSIS MOUNT, AXIAL LEADED 电容器
文件：	总3页 (文件大小：143K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Not for New Design

Type 735P

Vishay Sprague

Film Capacitors

High Current, Wrap-and-Fill, Metallized Polypropylene

FEATURES

• Wire or lug terminals

• High stability

• High ripple to 30 amperes

• Low inductance

• Low ESR

PERFORMANCE CHARACTERISTICS

Operating Temperature: - 55 °C to + 105 °C

Capacitance Range: 1.0 µF to 30.0 µF

Capacitance Tolerance: 10 %, 5 %

DC Voltage Rating: 100 WVDC to 400 WVDC

Equivalent Series Resistance: 20 kHz to 100 kHz

Dissipation Factor: 0.1 % maximum

DC Life Test: 140 % of rated voltage for 1000 hours

at + 105 °C. No visible damage. No open or short circuits.

Maximum Δ CAP 1.0 %

Minimum IR = 50 % of initial limit

Maximum DF = 0.10 %

Humidity Test: 95 % relative humidity at + 40 °C for 250

hours. No visible damage.

Maximum Δ CAP 1.0 %

Measured at 1000 Hz at + 25 °C

Minimum IR = 20 % of initial limit

Maximum DF = 0.12 %

ΔV/ΔT: 10 V/millisecond maximum

Voltage Test: 200 % of rated voltage for 2 minutes

Insulation Resistance: Measured at 100 WVDC after a

2 minute charge.

PHYSICAL CHARACTERISTICS

Pull Test:

Wire Leads: - 5 pounds (2.3 kilograms) for one minute. No

physical damage.

Terminal Lugs: - 10 pounds (4.5. kilograms) for one minute.

No physical damage.

Lead Bend: After three complete consecutive bends, no

damage.

Marking: Sprague^®trademark, type or part number,

capacitance and voltage.

At + 25 °C: 200 000 Megohm - Microfarads,

or 400 000 Megohm minimum

Vibration Test (Condition B): No mechanical damage,

short, open or intermittent circuits.

DIMENSIONS in inches [millimeters]

Terminal Style L

1.750

[44.45]

Min.

1.750

[44.45]

Min.

Max.

0.062 [1.57]

Tinned Solid Copper Wire*

D Max.< 0.700 [17.78], No. 20 AWG wire 0.032 [0.812] nominal diameter.

D Max.≥ 0.700 [17.78], No. 18 AWG wire 0.040 [1.016] nominal diameter.

Terminal Style H

Tinned Solid Copper Lug

L₁

0.062 [1.57]

Max.

L₂

0.062 [1.57]

0.360 0.005

[9.14 0.13]

0.062 [1.57]

0.312 [7.9] Min.

0.032 0.002

[0.81 0.05]

0.156 0.005 Dia.

[3.96 0.13]

L₁= L + 0.766 [19.46]

L₂= L + 0.437 [11.10]

* Leads to be within 0.0ꢀ2" [1.57 mm] of center line at egress but not less than 0.031" [0.79 mm] from edge (Terminal Style L only).

Document Number: 42031

Revision: 07-Feb-07

For technical questions, contact spresale@vishay.com

www.vishay.com

Not for New Design

Type 735P

Film Capacitors

High Current, Wrap-and-Fill,

Metallized Polypropylene

Vishay Sprague

STANDARD RATINGS in inches [millimeters]

ESR LIMIT

(Milliohm)

20 kHz -

MAXIMUM RIPPLE CURRENT

(Amps rms) at 20 kHz - 100 kHz

Case Temperature at

CASE SIZE

CAPACITANCE

(µF)

100 kHz

PART NUMBER**

+ 25 °C + 35 °C + 45 °C + 55 °C + 65 °C + 75 °C + 85 °C

Terminal Style L - Units with Wire Leads

100 WVDC

1.0*

2.0

3.0

735P105X9100L 0.531 [13.49] 0.750 [19.05]

735P205X9100L 0.59ꢀ [15.14] 0.938 [23.81]

735P305X9100L 0.717 [18.21] 0.938 [23.81]

735P505X9100L 0.733 [18.ꢀ2] 1.250 [31.75]

735P10ꢀX9100L 0.898 [22.81] 1.500 [38.10]

735P20ꢀX9100L 1.000 [25.40] 2.250 [57.15]

735P30ꢀX9100L 1.200 [30.48] 2.250 [57.15]

15.0

12.0

11.0

10.0

9.0

9.2

8.5

7.8

9.1

7.0

8.2

9.2

10.4

12.7

15.0

ꢀ.0

7.0

8.0

4.9

5.8

ꢀ.5

7.4

9.0

4.5

5.3

5.9

ꢀ.7

8.2

10.8

12.1

13.8

15.0

10.0

11.2

12.7

15.0

10.3

11.ꢀ

14.2

15.0

5.0

9.0

10.0*

20.0

30.0

11.0

13.ꢀ

15.0

8.0

ꢀ.0

11.1

12.4

10.0

11.4

200 WVDC

1.0*

2.0*

3.0

5.0*

10.0*

20.0

735P105X9200L 0.512 [13.01] 1.250 [31.75]

20.0

15.0

13.0

11.0

9.0

7.3

7.2

8.7

9.8

11.4

13.8

15.0

5.9

7.1

8.0

9.3

11.3

14.1

5.4

ꢀ.5

7.3

8.5

10.3

12.8

735P205X9200L 0.ꢀ98 [17.73] 1.250 [31.75]

735P305X9200L 0.747 [18.97] 1.500 [38.10]

735P505X9200L 0.8ꢀ2 [21.89] 1.750 [44.45]

735P10ꢀX9200L 1.030 [2ꢀ.1ꢀ] 2.250 [57.15]

735P20ꢀX9200L 1.440 [3ꢀ.58] 2.250 [57.15]

12.0

15.0

12.0

13.8

15.0

11.3

12.ꢀ

14.7

15.0

10.1

11.3

13.1

15.0

ꢀ.0

400 WVDC

1.0*

2.0*

3.0*

5.0*

10.0*

735P105X9400L 0.713 [18.11] 1.500 [38.10]

19.0

15.0

12.0

10.0

ꢀ.0

9.5

7.8

9.5

10.7

12.5

15.0

7.1

8.7

9.8

11.4

14.1

735P205X9400L 0.895 [22.73] 1.750 [44.45]

735P305X9400L 1.08ꢀ [27.58] 1.750 [44.45]

735P505X9400L 1.192 [30.28] 2.250 [57.15]

735P10ꢀX9400L 1.ꢀꢀ8 [42.37] 2.250 [57.15]

15.0

13.4

15.0

11.ꢀ

13.1

15.0

Terminal Style H - Units with Terminal Lugs

100 WVDC

1.0

2.0

3.0

735P105X9100H 0.531 [13.49] 0.875 [22.23]

735P205X9100H 0.59ꢀ [15.14] 1.0ꢀ2 [2ꢀ.97]

735P305X9100H 0.717 [18.21] 1.0ꢀ2 [2ꢀ.97]

735P505X9100H 0.733 [18.ꢀ2] 1.375 [34.93]

735P10ꢀX9100H 0.898 [22.81] 1.ꢀ25 [41.28]

735P20ꢀX9100H 1.000 [25.40] 2.375 [ꢀ0.33]

735P30ꢀX9100H 1.200 [30.48] 2.375 [ꢀ0.33]

15.0

12.0

11.0

10.0

9.0

10.3

12.0

13.3

14.8

17.8

21.ꢀ

24.3

9.5

8.7

7.8

8.9

ꢀ.7

7.8

8.7

5.5

ꢀ.3

7.1

7.9

9.5

5.0

5.8

ꢀ.5

7.2

8.7

11.0

12.3

13.7

1ꢀ.5

20.0

22.5

10.0

11.2

12.5

15.0

18.3

20.5

10.0

11.2

13.5

1ꢀ.4

18.4

5.0

9.7

10.0

20.0

30.0

11.7

14.2

15.9

8.0

ꢀ.0

11.ꢀ

13.0

10.ꢀ

11.9

200 WVDC

1.0

2.0

3.0

5.0

10.0

20.0

735P105X9200H 0.512 [13.00] 1.375 [34.93]

20.0

15.0

13.0

11.0

9.0

7.3

9.4

10.4

12.0

14.ꢀ

17.9

ꢀ.4

7.7

8.5

9.8

12.0

14.7

5.8

7.0

7.8

8.9

10.9

13.4

735P205X9200H 0.ꢀ98 [17.73] 1.375 [34.93]

735P305X9200H 0.747 [18.97] 1.ꢀ25 [41.28]

735P505X9200H 0.8ꢀ2 [21.89] 1.875 [47.ꢀ3]

735P10ꢀX9200H 1.030 [2ꢀ.1ꢀ] 2.375 [ꢀ0.33]

735P20ꢀX9200H 1.440 [3ꢀ.58] 2.375 [ꢀ0.33]

14.3

15.9

18.3

22.4

27.4

13.3

14.7

17.0

20.7

25.4

12.1

13.5

15.5

18.9

23.2

10.8

12.0

13.9

1ꢀ.9

20.7

ꢀ.0

400 WVDC

1.0

2.0

3.0

5.0

10.0

735P105X9400H 0.713 [18.11] 1.ꢀ25 [41.28]

19.0

15.0

12.0

10.0

ꢀ.0

9.5

8.3

7.5

9.1

10.3

11.9

14.7

735P205X9400H 0.895 [22.73] 1.875 [47.ꢀ3]

735P305X9400H 1.08ꢀ [27.58] 1.875 [47.ꢀ3]

735P505X9400H 1.192 [30.28] 2.375 [ꢀ0.33]

735P10ꢀX9400H 1.ꢀꢀ8 [42.37] 2.375 [ꢀ0.33]

15.0

21.1

24.4

30.0

15.0

19.5

22.ꢀ

27.8

15.0

17.8

20.ꢀ

25.4

14.2

15.9

18.5

22.7

12.3

13.8

1ꢀ.0

19.7

10.0

11.3

13.1

1ꢀ.1

* These ratings are stocked.

** Part Numbers listed are for a capacitance tolerance of 10 %. To specifiy 5 % tolerance, change the “X9” in the Part Number to “X5”.

ORDERING INFORMATION

735P

105

100

TYPE

CAPACITANCE

TOLERANCE

DC VOLTAGE RATING

TERMINAL STYLE

This is expressed in picofarads. The first

two digits are the significant figures. The

third is the number of zeros to follow.

X9 = 10 %

X5 = 5 %

This is expressed in volts.

L = Wire Leads

H = Lugs

www.vishay.com

2ꢀ

For technical questions, contact spresale@vishay.com

Document Number: 42031

Revision: 07-Feb-07

Legal Disclaimer Notice

Vishay

Disclaimer

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf

(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein

or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any

information provided herein to the maximum extent permitted by law. The product specifications do not expand or

otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed

therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this

document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless

otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such

applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting

from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding

products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000

Revision: 18-Jul-08

www.vishay.com

相关型号：