BYT62-TAP [VISHAY]
BYT62 Standard Avalanche Sinterglass Diode;型号: | BYT62-TAP |
厂家: | VISHAY |
描述: | BYT62 Standard Avalanche Sinterglass Diode 局域网 二极管 |
文件: | 总4页 (文件大小:109K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
BYT62
Vishay Semiconductors
www.vishay.com
Standard Avalanche Sinterglass Diode
FEATURES
• Glass passivated junction
• Hermetically sealed package
• Controlled avalanche characteristics
• Low reverse current
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
949539
APPLICATIONS
MECHANICAL DATA
• High voltage rectification diode
Case: SOD-57
Terminals: plated axial leads, solderable per MIL-STD-750,
method 2026
Polarity: color band denotes cathode end
Mounting position: any
Weight: approx. 369 mg
ORDERING INFORMATION (Example)
DEVICE NAME
ORDERING CODE
TAPED UNITS
MINIMUM ORDER QUANTITY
BYT62
BYT62-TR
5000 per 10" tape and reel
5000 per ammopack
25 000
25 000
BYT62
BYT62-TAP
PARTS TABLE
PART
TYPE DIFFERENTIATION
PACKAGE
BYT62
V
R = 2400 V; IF(AV) = 350 mA
SOD-57
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
Reverse voltage = repetitive peak reverse
voltage
See electrical characteristics
VR = VRRM
2400
V
Peak forward surge current
Average forward current
tp = 10 ms, half sine wave
IFSM
IF(AV)
ER
10
350
A
RthJA 60 K/W
mA
mJ
°C
Non repetitive reverse avalanche energy
Junction temperature
I(BR)R = 1 A, inductive load
60
Tj
175
Storage temperature range
Tstg
- 55 to + 190
°C
MAXIMUM THERMAL RESISTANCE (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
Junction ambient
Lead length l = 10 mm, TL = constant
RthJA
60
K/W
Rev. 1.8, 11-Sep-12
Document Number: 86033
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BYT62
Vishay Semiconductors
www.vishay.com
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX
3
UNIT
V
IF = 200 mA
VF
VF
-
-
-
-
-
-
-
-
-
-
IF = 1 A
-
3.6
2.9
4
V
Forward voltage
IF = 1 A, Tj = 175 °C
IF = 1 A, Tj = - 40 °C
VF
-
V
VF
-
V
V
R = VRRM
IR
-
5
μA
μA
nA
V
Reverse current
VR = VRRM, Tj = 175 °C
VR = VRRM, Tj = - 40 °C
IR = 100 μA
IR
-
250
400
-
IR
-
2500
-
Reverse breakdown voltage
Reverse recovery time
V(BR)R
trr
lF = 0.5 A, lR = 1 A, iR = 0.25 A
5
μs
TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified)
600
500
400
300
200
10
1
Tj = 175 °C
RthJA = 30 K/W
Tj = 25 °C
0.1
RthJA = 60 K/W
0.01
Tj = - 40 °C
100
0
VR = VRRM
0.001
200
0
40
80
120
160
0
1
2
3
4
5
6
7
95 9727
VF - Forward Voltage (V)
Tj - Junction Temperature (°C)
95 9725
Fig. 1 - Max. Reverse Power Dissipation vs. Junction Temperature
Fig. 3 - Max. Forward Current vs. Forward Voltage
1000
VR = VRRM
100
10
1
0.1
200
0
40
80
120
160
Tj - Junction Temperature (°C)
95 9726
Fig. 2 - Max. Reverse Current vs. Junction Temperature
Rev. 1.8, 11-Sep-12
Document Number: 86033
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
BYT62
Vishay Semiconductors
www.vishay.com
PACKAGE DIMENSIONS in millimeters (inches): SOD-57
26 (1.024) min.
26 (1.024) min.
4 (0.157) max.
20543
Rev. 1.8, 11-Sep-12
Document Number: 86033
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明