CMF120612.7OHMS1%50PPMBULK [VISHAY]

Fixed Resistor, Thin Film, 0.25W, 12.7ohm, 200V, 1% +/-Tol, -50,50ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT;


型号：	CMF120612.7OHMS1%50PPMBULK
厂家：	VISHAY
描述：	Fixed Resistor, Thin Film, 0.25W, 12.7ohm, 200V, 1% +/-Tol, -50,50ppm/Cel, Surface Mount, 1206, CHIP, ROHS COMPLIANT 电阻器
文件：	总3页 (文件大小：786K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

CMF Series

Powertron

•ꢀ Resistances from 5.1Ohm to 10MOhms

•ꢀ Power Rating 0.065 to 0.25 Watts

•ꢀ Resistance Tolerances to ± 0.05%

•ꢀ TCR’s to ± 5 ppm/K

•ꢀ Extreme Low Noise

•ꢀ Precision / Thin Film Resistance Element

•ꢀ Sizes: 0603 / 0805 / 1206 / 1210 / 2512

SPECIFICATIONS

Type

0603

0805

1206

Power Rating ( W )¹

0.065

0.125

0.25

Working Voltage

( VAC )

100

200

Resistance Range

Tolerances Available ( % )

( W )

Temperature Coefﬁcients Available ( ± ppm/K ) ²

5.1W - <10W

10W - <47W

47W - <100W

0.1% to 1%

25 / 50

0.1% to 1%

25 / 50

0.1% to 1%

25 / 50

0.1% to 1%

10 / 15 / 25 / 50

0.1% to 1%

10 / 15 / 25 / 50

0.1% to 1%

10 / 15 / 25 / 50

0.1% to 1%

5 / 10 / 15 / 25 / 50

0.05% to 1%

5 / 10 / 15 / 25 / 50

0.05% to 1%

5 / 10 / 15 / 25 / 50

100W - 332k

>332k - 1M

>1M - 2M

0.1% to 1%

10 / 15 / 25 / 50

0.05% to 1%

10 / 15 / 25 / 50

0.25% to 1%

>2M - 10M

¹W @ 70 °C / 0W @ 125 °C

²5 / 10 / 15 PPM : +25 °C to +85 °C

³1000V Available / contact factory

Document Number: 64304

Revision: 20-09-10

For technical questions, contact: powertron@vishaypg.com

www.powertron.de

CMF Series

Powertron

SPECIFICATIONS (continued)

Speciﬁcation

Value

Temperature Range

Climactic Cetegory

Solderability

-55°C to +125°C

55 / 125 / 56

250°C / 3s

Max. Soldering Temperature

260°C / 10s

Max DR

Long Term Stability

< 47W

±0.25%

±0.5%

47W - 10 MW

±0.15%

Storage 125°C / 1000h

Load Life / P=70% / 70°C / 1000h

Humidity / 96%RH / 40°C / 56 days

±0.1%

±0.15%

Dimensions

Type

0.063 ±0.004

[ 1.6 ±0.1 ]

0.030 ±0.004

[ 0.8 ±0.1 ]

0.018 ±0.004

[ 0.45 ±0.1 ]

0.012 ±0.008

[ 0.3 ±0.2 ]

CMF 0603

CMF 0805

CMF 1206

0.080 ±0.004

[ 2.0 ±0.1 ]

0.050 ±0.004

[ 1.25 ±0.1 ]

0.022 ±0.004

[ 0.55 ±0.1 ]

0.016 ±0.008

[ 0.4 ±0.2 ]

0.126 ±0.008

[ 3.2 ±0.2 ]

0.063 ±0.006

[ 1.6 ±0.15 ]

0.022 ±0.004

[ 0.55 ±0.1 ]

0.020 ±0.008

[ 0.5 ±0.2 ]

Power Derating Curve

Packaging:

120

100

Bulk or Blistertape to IEC 60286-3

Tape width 8mm / Reel Diameter 180 or 330mm

Minimum quantity Bulk / 100 pieces per value

Minimum quantity Tape & Reel / 1000 pieces per value

100

125

150

175

Ordering Information

Ambient Temperature (°C)

Part Number - Resistance - Tolerance - TCR - Packaging

Example: CMF 0603 10 kOhms 0.1% 10ppm Tape

( Note: if no TCR is Speciﬁed / The highest value will be supplied )

www.powertron.de

For technical questions, contact: powertron@vishaypg.com

Document Number: 64304

Revision: 20-09-10

Legal Disclaimer Notice

Vishay Precision Group

Disclaimer

ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Vishay Precision Group, Inc., its afﬁliates, agents, and employees, and all persons acting on its or their

behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or

incompleteness contained herein or in any other disclosure relating to any product.

The product speciﬁcations do not expand or otherwise modify Vishay Precision Group’s terms and conditions of

purchase, including but not limited to, the warranty expressed therein.

Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms

and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group

disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability,

including without limitation special, consequential or incidental damages, and (iii) any and all implied

warranties, including warranties of ﬁtness for particular purpose, non-infringement and merchantability.

Information provided in datasheets and/or speciﬁcations may vary from actual results in different applications

and performance may vary over time. Statements regarding the suitability of products for certain types of

applications are based on Vishay Precision Group’s knowledge of typical requirements that are often placed on

Vishay Precision Group products. It is the customer’s responsibility to validate that a particular product with the

properties described in the product speciﬁcation is suitable for use in a particular application.

No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by

any conduct of Vishay Precision Group.

The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise

expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use

in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any

damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel

to obtain written terms and conditions regarding products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.

Document No.: 63999

Revision: 27-Apr-11

www.vishaypg.com

相关型号：