CNY117-3X006 [VISHAY]
OPTOISO 5KV TRANS W/BASE 6DIP;型号: | CNY117-3X006 |
厂家: | VISHAY |
描述: | OPTOISO 5KV TRANS W/BASE 6DIP |
文件: | 总9页 (文件大小:202K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CNY117
Vishay Semiconductors
www.vishay.com
Optocoupler, Phototransistor Output,
with Base Connection, 110 °C Rated
FEATURES
• Operating temperature from -55 °C to +110 °C
• Breakdown voltage, 5000 VRMS
• Long term stability
1
6
A
C
B
C
E
• Industry standard dual-in-line package
5
4
2
3
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
NC
APPLICATIONS
• AC adapter
• SMPS
i179004-14
• PLC
DESCRIPTION
• Factory automation
• Game consoles
The CNY117 is a 110 °C rated optocoupler consisting of a
gallium arsenide infrared emitting diode optically coupled to
a silicon planar phototransistor detector in a plastic plug-in
DIP-6 package.
AGENCY APPROVALS
Safety application model number covering all products in
this datasheet is CNY117. This model number should be
used when consulting safety agency documents.
The coupling device is suitable for signal transmission
between two electrically separated circuits. The potential
difference between the circuits to be coupled is not allowed
to exceed the maximum permissible reference voltages.
• UL file no. E52744
• cUL tested to CSA 22.2 bulletin 5A
• DIN EN 60747-5-5 (VDE 0884-5), available with option 1
• BSI: EN 60065, EN 60950-1
• CQC GB8898-2011
ORDERING INFORMATION
DIP-6
Option 6
C
N
Y
1
1
7
-
#
X
0
#
#
T
7.62 mm
Option 7
10.16 mm
PART NUMBER
CTR
BIN
PACKAGE OPTION
TAPE
AND
REEL
> 8 mm
AGENCY CERTIFIED/PACKAGE
UL, cUL, BSI
CTR (%)
63 to 125
40 to 80
100 to 200
160 to 320
DIP-6
CNY117-1
CNY117-2
CNY117-3
CNY117-4
CNY117-4X006
CNY117-4X007T
160 to 320
DIP-6, 400 mil, option 6
SMD-6, option 7
VDE, UL, cUL, BSI
DIP-6
CNY117-1X006
CNY117-1X007T
40 to 80
CNY117-2X006
CNY117-2X007T
63 to 125
CNY117-3X006
CNY117-3X007T
100 to 200
CNY117-1X001
CNY117-1X016
CNY117-1X017T
CNY117-2X001
CNY117-2X016
CNY117-2X017T
CNY117-3X001
CNY117-3X016
CNY117-3X017T
CNY117-4X001
CNY117-4X016
CNY117-4X017T
DIP-6, 400 mil, option 6
SMD-6, option 7
Note
Additional options may be possible, please contact sales office.
•
Rev. 1.9, 08-Jan-14
Document Number: 83876
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CNY117
Vishay Semiconductors
www.vishay.com
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
Reverse voltage
VR
IF
6.0
60
V
mA
A
DC forward current
Surge forward current
Power dissipation
OUTPUT
t ≤ 10 μs
IFSM
Pdiss
2.5
100
mW
Collector emitter breakdown voltage
Collector current
Collector peak current
Output power dissipation
COUPLER
BVCEO
IC
70
50
V
mA
mA
mW
tp/T = 0.5, tp ≤ 10 ms
ICM
100
150
Pdiss
Isolation test voltage
between emitter and detector referred to
standard climate 23/50 DIN 50014
t = 1 min
VISO
5000
VRMS
Storage temperature range
Ambient temperature range
Soldering temperature (1)
Total power dissipation
Tstg
Tamb
Tsld
-55 to +150
-55 to +110
260
°C
°C
2 mm from case, ≤ 10 s
°C
Pdiss
250
mW
Notes
•
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through
hole devices (DIP).
(1)
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
1.65
10
UNIT
INPUT
Forward voltage
IF = 60 mA
VF
VBR
IR
1.39
V
V
Breakdown voltage
Reverse current
I
R = 10 μA
R = 6 V
R = 0 V, f = 1 MHz
6
V
0.01
25
μA
pF
Capacitance
V
CO
OUTPUT
Collector emitter capacitance
Base collector capacitance
Emitter base capacitance
COUPLER
V
V
V
CE = 5 V, f = 1 MHz
CE = 5 V, f = 1 MHz
CE = 5 V, f = 1 MHz
CCE
CBC
CEB
5.2
6.5
7.5
pF
pF
pF
Collector emitter, saturation voltage
Coupling capacitance
IF = 10 mA, IC = 2.5 mA
VCEsat
CC
0.25
0.6
2.0
2.0
5.0
5.0
0.4
V
pF
nA
nA
nA
nA
CNY117-1
CNY117-2
CNY117-3
CNY117-4
ICEO
ICEO
ICEO
ICEO
50
50
Collector emitter, leakage current
VCE = 10 V
100
100
Note
•
Minimum and maximum values were tested requierements. Typical values are characteristics of the device and are the result of engineering
evaluations. Typical values are for information only and are not part of the testing requirements.
Rev. 1.9, 08-Jan-14
Document Number: 83876
2
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CNY117
Vishay Semiconductors
www.vishay.com
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
40
TYP.
MAX.
80
UNIT
%
CNY117-1
CNY117-2
CNY117-3
CNY117-4
CNY117-1
CNY117-2
CNY117-3
CNY117-4
CTR
CTR
63
125
200
320
%
IF = 10 mA
CTR
100
160
13
%
CTR
%
Current transfer ratio
CTR
30
45
70
90
%
CTR
22
%
IF = 1.0 mA
CTR
34
%
CTR
56
%
Note
•
Current transfer ratio IC/IF at VCE = 5.0 V, 25 °C and collector emitter leakage current by dash number.
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
LINEAR OPERATION (without saturation)
IF = 10 mA, VCC = 5.0 V,
Turn-on time
Rise time
ton
tr
toff
tf
3.0
2.0
2.3
2.0
110
μs
μs
RL = 75 Ω
IF = 10 mA, VCC = 5.0 V,
RL = 75 Ω
IF = 10 mA, VCC = 5.0 V,
Turn-off time
Fall time
μs
RL = 75 Ω
IF = 10 mA, VCC = 5.0 V,
μs
RL = 75 Ω
IF = 10 mA, VCC = 5.0 V,
Cut-off frequency
fCO
kHz
RL = 75 Ω
SWITCHING OPERATION (with saturation)
IF = 20 mA
IF = 10 mA
CNY117-1
CNY117-2
CNY117-3
CNY117-4
CNY117-1
CNY117-2
CNY117-3
CNY117-4
CNY117-1
CNY117-2
CNY117-3
CNY117-4
CNY117-1
CNY117-2
CNY117-3
CNY117-4
ton
ton
ton
ton
tr
3.0
4.2
4.2
6.0
2.0
3.0
3.0
4.6
18
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
μs
Turn-on time
IF = 5.0 mA
IF = 20 mA
tr
Rise time
IF = 10 mA
tr
IF = 5.0 mA
IF = 20 mA
tr
toff
toff
toff
toff
tf
23
Turn-off time
Fall time
IF = 10 mA
23
IF = 5.0 mA
IF = 20 mA
25
11
tf
14
IF = 10 mA
IF = 5.0 mA
tf
14
tf
15
Rev. 1.9, 08-Jan-14
Document Number: 83876
3
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CNY117
Vishay Semiconductors
www.vishay.com
+ 5 V
I
I
IF
F
F
0
0
t p
t
IC
R
= 50 Ω
= 0.01
100 %
90 %
G
t
p
T
t
= 50 µs
p
Channel I
Channel II
Oscilloscope
R
C
= 1 MΩ
= 20 pF
10 %
L
L
0
tr
50 Ω
RL
t
td
ton
tf
toff
ts
95 10804-3
tp
td
tr
Pulse duration
Delay time
Rise time
t
t
Storage time
Fall time
Turn-off time
s
f
Fig. 1 - Test Circuit, Non-Saturated Operation
toff (= ts + tf)
ton (= td + tr)
Turn-on time
96 11698
+ 5 V
IC
IF
IF = 10 mA
0
Fig. 3 - Switching Times
RG = 50 Ω
tp
= 0.01
T
tp = 50 µs
Channel I
Channel II
Oscilloscope
RL
CL
1 MΩ
20 pF
≥
≤
50 Ω
1 kΩ
95 10843
Fig. 2 - Test Circuit, Saturated Operation
SAFETY AND INSULATION RATINGS
PARAMETER
SYMBOL
VALUE
UNIT
MAXIMUM SAFETY RATINGS
Output safety power
PSO
ISI
700
400
175
175
mW
mA
°C
Input safety current
Safety temperature
TSI
CTI
Comparative tracking index
INSULATION RATED PARAMETERS
Maximum withstanding isolation voltage
Maximum transient isolation voltage
Maximum repetitive peak isolation voltage
VISO
VIOTM
VIORM
RIO
5000
8000
890
≥ 1012
≥ 1011
55/115/21
2
VRMS
Vpeak
Vpeak
Ω
Insulation resistance
Isolation resistance
Tamb = 25 °C, VDC = 500 V
amb = 100 °C, VDC = 500 V
T
RIO
Ω
Climatic classification (according to IEC 68 part 1)
Environment (pollution degree in accordance to DIN VDE 0109)
Standard DIP-4
≥ 7
mm
mm
mm
mm
mm
Creepage distance
SMD
≥ 7
Standard DIP-4
≥ 8
Clearance distance
SMD
≥ 8
Insulation thickness
DTI
≥ 0.4
Note
•
As per DIN EN 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance
with the safety ratings shall be ensured by means of protective circuits.
Rev. 1.9, 08-Jan-14
Document Number: 83876
4
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CNY117
Vishay Semiconductors
www.vishay.com
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
1.8
1.7
1.6
1.5
1.4
1.3
1.2
1.1
1.0
0.9
0.8
0.7
0.6
10 000
1000
100
10
IF = 0 mA
Tamb = 25 °C
Tamb = 0 °C
VCE = 40 V
Tamb = - 25 °C
Tamb = - 55 °C
VCE = 24 V
VCE = 12 V
1
Tamb = 50 °C
Tamb = 75 °C
Tamb = 100 °C
Tamb = 110 °C
0.1
0.01
0.001
0.1
1
10
100
- 60 - 40 - 20
0
20 40 60 80 100 120
IF - Forward Current (mA)
T
amb - Ambient Temperature (°C)
Fig. 4 - Forward Voltage vs. Forward Current
Fig. 7 - Leakage Current vs. Ambient Temperature
60
50
1.2
VCE = 5 V
IF = 10 mA
IF = 30 mA
1.0
0.8
0.6
0.4
0.2
0
40
IF = 20 mA
30
IF = 15 mA
20
IF = 10 mA
10
0
IF = 5 mA
0
1
2
3
4
5
6
7
8
-60 -40 -20
0
20 40 60 80 100 120
V
CE - Collector Emitter Voltage (NS) (V)
T
amb - Ambient Temperature (°C)
Fig. 5 - Collector Current vs. Collector Emitter Voltage (NS)
Fig. 8 - Normalized CTR (NS) vs. Ambient Temperature
25
1.2
VCE = 0.4 V
IF = 10 mA
IF = 25 mA
1.0
0.8
0.6
0.4
0.2
0
20
15
IF = 10 mA
10
IF = 5 mA
IF = 2 mA
5
IF = 1 mA
0
0
0.1
0.2
0.3
0.4
-60 -40 -20
0
20 40 60 80 100 120
VCE - Collector Emitter Voltage (sat) (V)
T
amb - Ambient Temperature (°C)
Fig. 6 - Collector Current vs. Collector Emitter Voltage (sat)
Fig. 9 - Normalized CTR (sat) vs. Ambient Temperature
Rev. 1.9, 08-Jan-14
Document Number: 83876
5
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CNY117
Vishay Semiconductors
www.vishay.com
1000
100
10
1.2
1.0
0.8
0.6
0.4
0.2
0
IF = 10 mA
VCE = 5 V
VCC = 5 V
Tamb = 25 °C
Tamb = 0 °C
Tamb = - 40 °C
Tamb = - 55 °C
Tamb = 50 °C
Tamb = 75 °C
Tamb = 100 °C
Tamb = 110 °C
1
0.1
1
10
100
0.1
1
10
100
IC - Collector Current (mA)
I
F - Forward Current (mA)
Fig. 10 - Normalized CTR (NS) vs. Forward Current
Fig. 13 - CTR -3 dB Frequency vs. Collector Current
1.2
1000
IF = 10 mA
VCE = 0.4 V
VCE = 5 V, IF = 10 mA
toff
Tamb = 25 °C
1.0
Tamb = 0 °C
100
Tamb = - 40 °C
0.8
Tamb = - 55 °C
0.6
10
ton
Tamb = 50 °C
0.4
0.2
Tamb = 75 °C
1
Tamb = 100 °C
Tamb = 110 °C
0
0.1
0.1
0.1
1
10
100
1
10
100
I
F - Forward Current (mA)
RL - Load Resistance (kΩ)
Fig. 11 - Normalized CTR (sat) vs. Forward Current
Fig. 14 - Switching Time vs. Load Resistance
0
VCE = 5 V
- 20
- 40
- 60
- 80
- 100
- 120
- 140
- 160
1
10
100
1000
f - Frequency (kHz)
Fig. 12 - CTR Frequency vs. Phase Angle
Rev. 1.9, 08-Jan-14
Document Number: 83876
6
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CNY117
Vishay Semiconductors
www.vishay.com
PACKAGE DIMENSIONS in millimeters
6
5
4
6.5 0.5
1
2
3
7.3 0.5
7.62 0.3
1.1 0.1
3.5 0.3
0.5 typ.
3.3 0.5
2.8 0.5
0.26
0.5 0.1
2.54 0.25
7.62 to 9.98
22530
Option 7
Option 6
7.62 typ.
7.62 typ.
3.5 0.3
0.1 min.
3.5 0.3
0.35 0.25
0.6 min.
2.7 min.
8 min.
10.16 typ.
10.3 max.
0.76
R 0.25
2.54
1.78
1.52
8 min.
11.05
20802-35
PACKAGE MARKING (Example of CNY117-3X017T)
CNY117-3
Pin 1 I.D.
V YWW 25
Notes
•
•
VDE logo is only marked on option 1 parts. Option information is not marked on the part.
Tape and reel suffix (T) is not part of the package marking.
Rev. 1.9, 08-Jan-14
Document Number: 83876
7
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CNY117
Vishay Semiconductors
www.vishay.com
TUBE AND TAPE INFORMATION
DEVICES PER TUBE
TYPE
UNITS/TUBE
TUBES/BOX
UNITS/BOX
DIP-6
50
40
2000
2
0.1
4
0.1
Ø 1.55 0.05
1.75 0.1
7.5 0.1
16 0.3
12 0.1
0.3 0.05
22537-1
Fig. 15 - Tape and Reel Drawing, 1000 Units per Reel
Rev. 1.9, 08-Jan-14
Document Number: 83876
8
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明