CP00021K000JB14 [VISHAY]

RES 1K OHM 2W 5% AXIAL;


型号：	CP00021K000JB14
厂家：	VISHAY
描述：	RES 1K OHM 2W 5% AXIAL
文件：	总4页 (文件大小：102K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Vishay Dale

www.vishay.com

Wirewound Resistors, Commercial Power, Axial Lead

FEATURES

• High performance for low cost

• Meets or exceeds requirements of EIA

Standard RS-344

Available

• High power to size ratio

• Ceramic cases are available with circuit board

stand-offs (designated with a -3 model ending)

• Special inorganic potting compound and

ceramic case provide high thermal conductivity

in a fireproof package

Available

• Material categorization:

for definitions of compliance please see

www.vishay.com/doc?99912

STANDARD ELECTRICAL SPECIFICATIONS

POWER RATING

WEIGHT

(TYPICAL)

RESISTANCE RANGE

TOLERANCE

ꢀ

GLOBAL MODEL

P_{40 °C}



CP0002

0.1 to 1K

5, 10

2.0

2.2

CP0002...3

CP0003

0.1 to 2K

3.4

CP0003...3

CP0005

0.1 to 2K

3.6

0.1 to 2.4K

0.1 to 7K

4.8

CP0005...3

CP0007

5.0

6.8

CP0007...3

CP0010

0.1 to 7K

7.0

0.1 to 11K

0.1 to 16K

9.5

CP0010...3

CP0015

9.9

16.8

17.4

22.8

23.6

24.5

25.3

37.0

CP0015...3

CP0020

CP0020...3

CP0022

CP0022...3

CP0025

TECHNICAL SPECIFICATIONS

PARAMETER

UNIT

CHARACTERISTICS

Temperature Coefficient

Short Time Overload

ppm/°C

300 1  and above; 600 below 1 

5 x rated power for 5 s

10 minimum

-65 to +275

1000

Terminal Strength

Operating Temperature Range

Dielectric Withstanding Voltage

Maximum Working Voltage

°C

V_AC

(P x R)^1/2

Note

•

Wirewound CP resistors can reliably function as a fuse and as a resistor. Such components involve compromise between fusing and resistive

functions; therefore, each design should be tailored to the application to ensure optimum performance. Contact factory by using the e-mail

address at the bottom of this page for design assistance

Revision: 01-Oct-2020

Document Number: 30213

For technical questions, contact: ww2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Vishay Dale

www.vishay.com

GLOBAL PART NUMBER INFORMATION

Global Part Numbering Example: CP000515R00JE143

GLOBAL MODEL

VALUE

TOLERANCE

PACKAGING

E14 = lead (Pb)-free bulk pack

SPECIAL

(See Standard Electrical

Specifications Global

Model column for options)

R = decimal

K = thousand

R1500 = 0.15 

1K500 = 1500 

J = 5.0 ꢀ

K = 10.0 ꢀ

(Dash number)

(Up to 3 digits)

From 1 to 999

as applicable

E31 = lead (Pb)-free four layer bulk pack

B14 = bulk pack

B31 = four layer bulk pack

Historical Part Numbering Example: CP-5-3 15  5 ꢀ B14

CP-5-3

15 

5 ꢀ

B14

PACKAGING

HISTORICAL MODEL

RESISTANCE VALUE

TOLERANCE CODE

DIMENSIONS in inches [millimeters]

CPxxxx

CPxxxxꢁꢁꢁ3

typical

0ꢁ125

[3ꢁ18]

typical

DIMENSIONS in inches [millimeters]

GLOBAL

MODEL

A ⁽¹⁾

0ꢁ031

[0ꢁ794]

0ꢁ031

[0ꢁ794]

0ꢁ031

[0ꢁ794]

0ꢁ002

0ꢁ125

[3ꢁ175]

[0ꢁ794]

[0ꢁ050]

CP0002

0.688 [17.46]

0.875 [22.22]

1.391 [35.32]

1.875 [47.62]

2.500 [63.50]

0.250 [6.35]

0.313 [7.94]

0.375 [9.52]

0.500 [12.70]

0.625 [15.87]

0.250 [6.35]

0.313 [7.94]

0.344 [8.73]

0.500 [12.70]

0.625 [15.87]

0.032 [0.813]

0.036 [0.914]

0.040 [1.016]

1.500 [38.10]

CP0002ꢁꢁꢁ3

CP0003

0.313 [7.94]

CP0003ꢁꢁꢁ3

CP0005

0.375 [9.52]

CP0005ꢁꢁꢁ3

CP0007

0.406 [10.32]

CP0007ꢁꢁꢁ3

CP0010

0.469 [11.91]

CP0010ꢁꢁꢁ3

CP0015

0.469 [11.91]

CP0015ꢁꢁꢁ3

CP0020 ⁽²⁾

CP0020ꢁꢁꢁ3

CP0022

0.625 [15.87]

CP0022ꢁꢁꢁ3

CP0025

0.625 [15.87]

Note

(1)

Potting compound may extend outside of ceramic case up to 0.060 [1.52] maximum per side

Revision: 01-Oct-2020

Document Number: 30213

For technical questions, contact: ww2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Vishay Dale

www.vishay.com

MATERIAL SPECIFICATIONS

DERATING

120

Element: copper-nickel alloy or nickel-chrome alloy,

depending on resistance value

100

Core: woven fiberglass

Body: steatite ceramic case with inorganic potting

compound

End Caps: tin plated steel

Terminals: tinned copper

Part Marking: Dale, model, wattage, value, tolerance, date

code

-55 -25

125

175

225

275

AMBIENT TEMPERATURE IN °C

PERFORMANCE

TEST

CONDITIONS OF TEST

-55 °C to +275 °C, 5 cycles, 30 min dwell time

5 x rated power for 5 s

TEST LIMITS (EIA-344)

(5.0 ꢀ + 0.05 ) R

(4.0 ꢀ + 0.05 ) R

(2.0 ꢀ + 0.05 ) R

(3.0 ꢀ + 0.05 ) R

(5.0 ꢀ + 0.05 ) R

(10.0 ꢀ + 0.05 ) R

(2.0 ꢀ + 0.05 ) R

(4.0 ꢀ + 0.05 ) R

Thermal Shock

Short Time Overload

Dielectric Withstanding Voltage 1000 V_RMS, for 1 min

Low Temperature Storage

Humidity

-65 °C, full rated working voltage for 45 min

75 °C, 90 ꢀ to 100 ꢀ RH, 240 h

Load Life

1000 h at rated power, + 25 °C, 1.5 h “ON”, 0.5 h “OFF”

Terminal Strength

Resistance to Solder Heat

5 pounds for 30 s; body twisted about axis, 3 x 360° rotations

Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body

Revision: 01-Oct-2020

Document Number: 30213

For technical questions, contact: ww2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product

with the properties described in the product specification is suitable for use in a particular application. Parameters provided in

datasheets and / or specifications may vary in different applications and performance may vary over time. All operating

parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.

Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited

to the warranty expressed therein.

Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and

for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of

any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.

Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website

or for that of subsequent links.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Revision: 09-Jul-2021

Document Number: 91000

相关型号：