CP00021K000JE66 [VISHAY]

RES 1K OHM 2W 5% AXIAL;


型号：	CP00021K000JE66
厂家：	VISHAY
描述：	RES 1K OHM 2W 5% AXIAL
文件：	总3页 (文件大小：297K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

End of Life July 2020

CP High Volume

www.vishay.com

Vishay Dale

Wirewound/Metal Oxide Resistors, Commercial Power, Axial Lead

FEATURES

• High performance for low cost

• High power to size ratio

• Ceramic cases are available with circuit board

stand-offs (designated with a ...3 model ending)

• Special cement potting compound and ceramic

case provide high thermal conductivity in a

fireproof package

• Material categorization:

for definitions of compliance please see

www.vishay.com/doc?99912

STANDARD ELECTRICAL SPECIFICATIONS

POWER RATING

RESISTANCE RANGE



RESISTANCE RANGE



WEIGHT

(typical)

GLOBAL

MODEL

TOLERANCE

ꢀ

P_{40 °C}

WIREWOUND ⁽¹⁾

METAL OXIDE ⁽¹⁾

CP0002

0.1 to 100

101 to 30K

101 to 33K

101 to 50K

5, 10

2.0

3.4

CP0003

CP0005

3.6

CP0005...3

CP0007

4.8

5.0

CP0007...3

CP0010

6.8

9.5

CP0010...3

CP0015

9.9

16.8

22.8

CP0020

TECHNICAL SPECIFICATIONS

PARAMETER

UNIT

WIREWOUND CHARACTERISTICS

METAL OXIDE CHARACTERISTICS

Temperature Coefficient

Short Time Overload

ppm/°C

400

5 x rated power for 5 s

10 minimum

-65 to +275

1000

400

5 x rated power for 5 s

10 minimum

-65 to +225

1000

Terminal Strength

Operating Temperature Range

Dielectric Withstanding Voltage

Maximum Working Voltage

°C

V_AC

(P x R)^1/2

GLOBAL PART NUMBER INFORMATION

Global Part Numbering Example: CP000515R00JE663

GLOBAL MODEL

VALUE

TOLERANCE

PACKAGING

E66 = lead (Pb)-free bulk pack

SPECIAL

(See Standard Electrical

Specifications Global

Model column for

options)

R = decimal

K = thousand

R1500 = 0.15 

1K500 = 1500 

J = 5.0 %

K = 10.0 %

(Dash number)

(Up to 3 digits)

From 1 to 999

as applicable

Revision: 05-Feb-2020

Document Number: 30113

For technical questions, contact: ww2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

End of Life July 2020

CP High Volume

www.vishay.com

Vishay Dale

DIMENSIONS in inches [millimeters]

CPxxxx

CPxxxx...3

0.125 [3.18]

typical

DIMENSIONS in inches [millimeters]

GLOBAL MODEL

L ⁽¹⁾

0ꢁ060 [1ꢁ5]

0ꢁ040 [1ꢁ0]

0ꢁ060 [1ꢁ5]

0ꢁ002 [0ꢁ05]

0.0256 [0.65]

0.031 [0.8]

0ꢁ120 [3ꢁ0]

CP0002

0.71 [18]

0.87 [22]

1.38 [35]

1.89 [48]

2.36 [60]

0.276 [7]

0.315 [8]

0.276 [7]

0.315 [8]

0.354 [9]

0.453 [11.5]

0.531 [13.5]

1.378 [35]

CP0003

CP0005

0.394 [10]

0.492 [12.5]

0.551 [14]

CP0005ꢁꢁꢁ3

CP0007

0.413 [10.5]

CP0007ꢁꢁꢁ3

CP0010

0.472 [12]

CP0010ꢁꢁꢁ3

CP0015

0.472 [12]

CP0020

Notes

(1)

Potting compound may extend outside of ceramic case up to 0.060 [1.52] maximum per side

MATERIAL SPECIFICATIONS

DERATING

120

Element: wirewound = copper-nickel alloy or nickel-chrome

alloy, depending on resistance value;

100

metal oxide = high temperature fired metal oxide film

Core: wirewound = ceramic

metal oxide = ceramic

Body: steatite ceramic case with inorganic potting

compound

Wirewound

End Caps: tin plated steel

Terminals: tinned copper

Metal oxide

Part Marking: DALE, model, wattage, value, tolerance, date

code

-55

-25

125

175

225

275

AMBIENT TEMPERATURE IN °C

PERFORMANCE

TEST

CONDITIONS OF TEST

TEST LIMITS (EIA-344)

(5.0 % + 0.05 ) R

(4.0 % + 0.05 ) R

(2.0 % + 0.05 ) R

(3.0 % + 0.05 ) R

(5.0 % + 0.05 ) R

(10.0 % + 0.05 ) R

(2.0 % + 0.05 ) R

(4.0 % + 0.05 ) R

Thermal Shock

Short Time Overload

-55 °C to +275 °C (+225 °C for metal oxide), 5 cycles, 30 min dwell time

5 x rated power for 5 s

Dielectric Withstanding Voltage 1000 V_RMS, for 1 min

Low Temperature Storage

Humidity

-65 °C, full rated working voltage for 45 min

75 °C, 90 % to 100 % RH, 240 h

Load Life

1000 h at rated power, + 25 °C, 1.5 h “ON”, 0.5 h “OFF”

5 pounds for 30 s; body twisted about axis, 3 x 360° rotations

Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body

Terminal Strength

Resistance to Solder Heat

Revision: 05-Feb-2020

Document Number: 30113

For technical questions, contact: ww2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product

with the properties described in the product specification is suitable for use in a particular application. Parameters provided in

datasheets and / or specifications may vary in different applications and performance may vary over time. All operating

parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.

Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited

to the warranty expressed therein.

Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and

for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of

any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.

Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website

or for that of subsequent links.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Revision: 09-Jul-2021

Document Number: 91000

相关型号：