CPL03R0360HE013 [VISHAY]

RESISTOR, WIRE WOUND, 3 W, 3 %, 300 ppm, 0.036 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, GREEN;


型号：	CPL03R0360HE013
厂家：	VISHAY
描述：	RESISTOR, WIRE WOUND, 3 W, 3 %, 300 ppm, 0.036 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, GREEN 电阻器
文件：	总3页 (文件大小：108K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

CPL

Vishay Dale

Wirewound Resistors, Commercial Power, Axial Lead, Low Value

FEATURES

• High power to size ratio

• Low inductance, less than 5 nH

• Ceramic cases are available with circuit board

stand-offs (designated with a -3 model ending)

• Superior surge capability

• Extremely low resistance values

• Complete welded construction

• Special inorganic potting compound and

ceramic case provide high thermal conductivity

in a fireproof package

• Compliant to RoHS Directive 2002/95/EC

STANDARD ELECTRICAL SPECIFICATIONS

POWER RATING

RESISTANCE

RANGE ^



WEIGHT

(typical)

GLOBAL

MODEL

HISTORICAL

MODEL

TOLERANCE

ꢀ

P_{40 °C}

CPL03

CPL03...3

CPL05

CPL05...3

CPL07

CPL07...3

CPL10

CPL10...3

CPL15

CPL15...3

CPL-3

CPL-3-3

CPL-5

CPL-5-3

CPL-7

CPL-7-3

CPL-10

CPL-10-3

CPL-15

CPL-15-3

0.01 to 0.10

1, 3, 5, 10

3.4

3.6

4.8

5.0

6.8

7.0

9.5

9.9

16.8

17.4

Note

(1)

Resistance is measured 3/8" [9.52 mm] from resistor body.

TECHNICAL SPECIFICATIONS

PARAMETER

UNIT

CPL RESISTOR CHARACTERISTICS

Temperature Coefficient

Short Time Overload

Maximum Working Voltage

Operating Temperature Range

Terminal Strength

ppm/°C

300

5 x rated power for 5 s

(P x R)^1/2

°C

- 65 to + 275

10 minimum

1000

Dielectric Withstanding Voltage

V_AC

GLOBAL PART NUMBER INFORMATION

Global Part Numbering example: CPL05R0500JB143

GLOBAL MODEL

VALUE

TOLERANCE

PACKAGING

SPECIAL

CPL03

CPL05

CPL07

CPL10

CPL15

R = Decimal

R1000 = 0.10 

F = 1.0 ꢀ

G = 2.0 ꢀ

H = 3.0 ꢀ

J = 5.0 ꢀ

K = 10.0 ꢀ

E14 = Lead (Pb)-free bulk

(Dash Number)

(up to 3 digits)

From 1 to 999

as applicable

E31 = Lead (Pb)-free four layer bulk

E01 = Lead (Pb)-free skin pack

B14 = Tin/lead bulk

B31 = Tin/lead four layer bulk

J01 = Tin/lead skin pack

Historical Part Numbering example: CPL-5-3 0.05  5 ꢀ B14

CPL-5-3

0.05 

5 ꢀ

B14

HISTORICAL MODEL

RESISTANCE VALUE

TOLERANCE CODE

PACKAGING

* Pb containing terminations are not RoHS compliant, exemptions may apply

** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902

www.vishay.com

For technical questions, contact: ww2aresistors@vishay.com

Document Number: 30212

Revision: 10-May-11

This document is subject to change without notice.

THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CPL

Vishay Dale

Wirewound Resistors, Commercial Power,

Axial Lead, Low Value

DIMENSIONS in inches [millimeters]

CPLxx

CPLxx...3

1.0 [25.4]

minimum

1.0 [25.4]

minimum

0.125 [3.18]

typical

DIMENSIONS in inches [millimeters]

GLOBAL

A ⁽¹⁾

MODEL

0.031 ꢁ0.794]

0.313 [7.94]

0.375 [9.52]

0.500 [12.70]

0.031 ꢁ0.794]

0.313 [7.94]

0.344 [8.73]

0.500 [12.70]

0.031 ꢁ0.794]

0.001 ꢁ0.025]

CPL03

0.875 [22.22]

1.391 [35.32]

1.875 [47.62]

0.036 [0.914]

CPL03...3

CPL05

0.375 [9.52]

CPL05...3

CPL07

0.406 [10.32]

CPL07...3

CPL10

0.469 [11.91]

CPL10...3

CPL15

0.469 [11.91]

CPL15...3

0.625 [15.87]

Note

(1)

Potting compound may extend outside of ceramic case up to 0.060 [1.52] maximum per side.

MATERIAL SPECIFICATIONS

DERATING

120

Element: Self-supporting copper-nickel alloy or nickel-

chrome alloy, depending on resistance range

100

Body: Steatite ceramic case with inorganic potting

compound

Terminals: Tinned copper

Part Marking: Dale, model, wattage, value, tolerance, date

code

- 65 - 25

125

175

225

275

AMBIENT TEMPERATURE IN °C

PERFORMANCE

TEST

CONDITIONS OF TEST

- 55 °C to + 275 °C, 5 cycles, 30 min dwell time

TEST LIMITS (EIA RS-344)

ꢀ5.0 % + 0.05 ) R

ꢀ4.0 % + 0.05 ) R

ꢀ2.0 % + 0.05 ) R

ꢀ(.0 % + 0.05 ) R

ꢀ5.0 % + 0.05 ) R

Thermal Shock

Short Time Overload

Dielectric Withstanding Voltage

Low Temperature Operation

Bias Humidity

5 x rated power for 5 s

1000 V_RMSfor 1 min

- 65 °C, full rated working voltage for 45 min

75 °C, 90 ꢀ to 100 ꢀ RH, 240 h

1000 h at rated power, + 40 °C, 1.5 h “ON”, 0.5 h “OFF”

Load Life

5 s to 10 s 10 pound pull test, torsion test - 3 alternating directions,

360° each

Terminal Strength

ꢀ1.0 % + 0.05 ) R

Resistance to Solder Heat

Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body

Document Number: 30212

Revision: 10-May-11

For technical questions, contact: ww2aresistors@vishay.com

This document is subject to change without notice.

www.vishay.com

THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Revision: 12-Mar-12

Document Number: 91000

相关型号：