CPSL10R0910KE145 [VISHAY]
RESISTOR, WIRE WOUND, 10 W, 10 %, 100 ppm, 0.091 ohm, THROUGH HOLE MOUNT, SPECIAL LEADED-4, GREEN;
| 型号： | CPSL10R0910KE145 |
| 厂家： | 
VISHAY |
| 描述： | RESISTOR, WIRE WOUND, 10 W, 10 %, 100 ppm, 0.091 ohm, THROUGH HOLE MOUNT, SPECIAL LEADED-4, GREEN |
| 文件： | 总3页 (文件大小：80K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CPSL
Vishay Dale
www.vishay.com
Wirewound Resistors, Commercial Power,
Four Terminal, Low Value
FEATURES
• Low inductance
• Extremely low resistance values
• Current sensing
• Low temperature coefficients
• High power to size ratio
• Ceramic cases are available with circuit board
stand-offs (designated with a -3 model ending)
• Superior surge capability
• Complete welded construction
• Special inorganic potting compound and
ceramic case provide high thermal conductivity in a
fireproof package
• Compliant to RoHS Directive 2002/95/EC
Notes
* Pb containing terminations are not RoHS compliant, exemptions may apply
** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902
SCHEMATIC
Sense
leads
Current
leads
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
HISTORICAL
POWER RATING P40 °C RESISTANCE RANGE
TOLERANCE
ꢀ
WEIGHT (typical)
g
MODEL
MODEL
W
3
Ω
CPSL03...5
CPSL03...3
CPSL05...5
CPSL05...3
CPSL07...5
CPSL10...5
CPSL15...5
CPSL-3-5
CPSL-3-3
CPSL-5-5
CPSL-5-3
CPSL-7-5
CPSL-10-5
CPSL-15-5
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
4.0
4.2
5.2
5.4
7.6
3
5
5
7
10
15
10.2
18.9
TECHNICAL SPECIFICATIONS
PARAMETER
Temperature Coefficient
Short Time Overload
Maximum Working Voltage
Operating Temperature Range
Terminal Strength
UNIT
ppm/°C
-
V
°C
lb
CPSL RESISTOR CHARACTERISTICS
100 maximum
5 x rated power for 5 s
(P x R)1/2
- 65 to + 275
10 minimum
Dielectric Withstanding Voltage
VAC
1000
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: CPSL05R0500JB143
C
P
S
L
0
5
R
0
5
0
0
J
B
1
4
3
GLOBAL MODEL
VALUE
TOLERANCE
PACKAGING
SPECIAL
CPSL03
CPSL05
CPSL07
CPSL10
CPSL15
R = Decimal
R1000 = 0.10 Ω
F = 1.0 %
G = 2.0 %
H = 3.0 %
J = 5.0 %
K = 10.0 %
E14 = Lead (Pb)-free bulk
(Dash Number)
(up to 3 digits)
From 1 to 999
as applicable
E31 = Lead (Pb)-free four layer bulk
B14 = Tin/lead bulk
B31 = Tin/lead four layer bulk
Historical Part Numbering example: CPSL-5-3 0.05 Ω 5 ꢀ B14
CPSL-5-3
0.05 Ω
5 ꢀ
B14
HISTORICAL MODEL
RESISTANCE VALUE
TOLERANCE CODE
PACKAGING
Document Number: 30217
Revision: 22-Dec-11
1
For technical questions, contact: ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CPSL
Vishay Dale
www.vishay.com
DIMENSIONS in inches [millimeters]
CPSLxx...3
CPSLxx...5
1.0 [25.4]
min.
1.0 [25.4]
A
C
A
B
min.
B
D
C
1.50 0.0ꢀ2
[38.1 1.5ꢁ]
1.50 0.0ꢀ2
[38.1 1.5ꢁ]
E
E
F
F
DIMENSIONS in inches [millimeters]
GLOBAL
MODEL
A (1)
B
C
D
E
F
0.031 [0.794]
0.875 [22.22]
0.875 [22.22]
0.875 [22.22]
0.875 [22.22]
1.391 [35.32]
1.875 [47.62]
1.875 [47.62]
0.031 [0.794]
0.313 [7.94]
0.313 [7.94]
0.375 [9.52]
0.375 [9.52]
0.375 [9.52]
0.375 [9.52]
0.500 [12.70]
0.031 [0.794]
0.031 [0.794]
0.001 [0.025]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.0ꢁ3 [1.59]
CPSL03...5
CPSL03...3
CPSL05...5
CPSL05...3
CPSL07...5
CPSL10...5
CPSL15...5
0.313 [7.94]
0.313 [7.94]
0.344 [8.73]
0.344 [8.73]
0.344 [8.73]
0.344 [8.73]
0.500 [12.70]
-
0.563 [14.30]
0.563 [14.30]
0.563 [14.30]
0.563 [14.30]
1.000 [25.40]
1.375 [34.93]
1.375 [34.93]
0.375 [9.52]
-
0.438 [11.11]
-
-
-
Note
(1)
Potting compound may extend outside of ceramic case up to 0.060 [1.52] maximum per side.
MATERIAL SPECIFICATIONS
DERATING
120
Element: Self-supporting copper-nickel alloy or nickel-
chrome alloy, depending on resistance value
100
80
60
40
20
Body: Steatite ceramic case with inorganic potting
compound
Terminals: Tinned copper
Part Marking: Dale, model, wattage, value, tolerance, date
code
0
- 65 - 25
25
75
125
175
225
275
40
AMBIENT TEMPERATURE IN °C
PERFORMANCE
TEST
CONDITIONS OF TEST
- 55 °C to + 275 °C, 5 cycles, 30 min dwell time
5 x rated power for 5 s
TEST LIMITS
Thermal Shock
Short Time Overload
(5.0 % + 0.05 Ω) ΔR
(4.0 % + 0.05 Ω) ΔR
(2.0 % + 0.05 Ω) ΔR
(3.0 % + 0.05 Ω) ΔR
(5.0 % + 0.05 Ω) ΔR
(5.0 % + 0.05 Ω) ΔR
Dielectric Withstanding Voltage 1000 VRMS for 1 min
Low Temperature Operation
Bias Humidity
- 65 °C, full rated working voltage for 45 min
75 °C, 90 % to 100 % RH, 240 h
Load Life
1000 h at rated power, + 40 °C, 1.5 h “ON”, 0.5 h “OFF”
Terminal Strength
Resistance to Solder Heat
5 s to 10 s 10 pound pull test, torsion test - 3 alternating directions, 360° each
Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body
(1.0 % + 0.05 Ω) ΔR
(1.0 % + 0.05 Ω) ΔR
Revision: 22-Dec-11
Document Number: 30217
2
For technical questions, contact: ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号：
CPSL15R0360FE145
RESISTOR, WIRE WOUND, 15 W, 1 %, 100 ppm, 0.036 ohm, THROUGH HOLE MOUNT, SPECIAL LEADED-4, GREEN
VISHAY
CPSL15R0400JE315
RESISTOR, WIRE WOUND, 15 W, 5 %, 100 ppm, 0.04 ohm, THROUGH HOLE MOUNT, SPECIAL LEADED-4, ROHS COMPLIANT
VISHAY
CPSL15R0510KE145
RESISTOR, WIRE WOUND, 15 W, 10 %, 100 ppm, 0.051 ohm, THROUGH HOLE MOUNT, SPECIAL LEADED-4, GREEN
VISHAY
CPSL15R0680FE315
RESISTOR, WIRE WOUND, 15 W, 1 %, 100 ppm, 0.068 ohm, THROUGH HOLE MOUNT, SPECIAL LEADED-4, GREEN
VISHAY
CPSL15R1000FE315
RESISTOR, WIRE WOUND, 15 W, 1 %, 100 ppm, 0.1 ohm, THROUGH HOLE MOUNT, SPECIAL LEADED-4, GREEN
VISHAY
CPSM03110R0JE31
RESISTOR, WIRE WOUND, 3 W, 5 %, 600 ppm, 110 ohm, SURFACE MOUNT, 9137, CHIP, GREEN
VISHAY
©2020 ICPDF网 联系我们和版权申明