CPSL15R1000FE315 [VISHAY]

RESISTOR, WIRE WOUND, 15 W, 1 %, 100 ppm, 0.1 ohm, THROUGH HOLE MOUNT, SPECIAL LEADED-4, GREEN;


型号：	CPSL15R1000FE315
厂家：	VISHAY
描述：	RESISTOR, WIRE WOUND, 15 W, 1 %, 100 ppm, 0.1 ohm, THROUGH HOLE MOUNT, SPECIAL LEADED-4, GREEN 电阻器
文件：	总3页 (文件大小：90K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

CPSL

Vishay Dale

www.vishay.com

Wirewound Resistors, Commercial Power,

Four Terminal, Low Value

FEATURES

• Low inductance

• Extremely low resistance values

• Current sensing

• Low temperature coefficients

• High power to size ratio

• Ceramic cases are available with circuit board

stand-offs (designated with a -3 model ending)

• Superior surge capability

• Complete welded construction

• Special inorganic potting compound and

ceramic case provide high thermal conductivity in a

fireproof package

• Compliant to RoHS Directive 2002/95/EC

Notes

* Pb containing terminations are not RoHS compliant, exemptions may apply

** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902

SCHEMATIC

Sense

leads

Current

leads

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL

HISTORICAL

POWER RATING P_{40 °C}RESISTANCE RANGE

TOLERANCE

ꢀ

WEIGHT (typical)

MODEL

CPSL03...5

CPSL03...3

CPSL05...5

CPSL05...3

CPSL07...5

CPSL10...5

CPSL15...5

CPSL-3-5

CPSL-3-3

CPSL-5-5

CPSL-5-3

CPSL-7-5

CPSL-10-5

CPSL-15-5

0.01 to 0.10

1, 3, 5, 10

4.0

4.2

5.2

5.4

7.6

10.2

18.9

TECHNICAL SPECIFICATIONS

PARAMETER

Temperature Coefficient

Short Time Overload

Maximum Working Voltage

Operating Temperature Range

Terminal Strength

UNIT

ppm/°C

°C

CPSL RESISTOR CHARACTERISTICS

100 maximum

5 x rated power for 5 s

(P x R)^1/2

- 65 to + 275

10 minimum

Dielectric Withstanding Voltage

V_AC

1000

GLOBAL PART NUMBER INFORMATION

Global Part Numbering example: CPSL05R0500JB143

GLOBAL MODEL

VALUE

TOLERANCE

PACKAGING

SPECIAL

CPSL03

CPSL05

CPSL07

CPSL10

CPSL15

R = Decimal

R1000 = 0.10 Ω

F = 1.0 %

G = 2.0 %

H = 3.0 %

J = 5.0 %

K = 10.0 %

E14 = Lead (Pb)-free bulk

(Dash Number)

(up to 3 digits)

From 1 to 999

as applicable

E31 = Lead (Pb)-free four layer bulk

B14 = Tin/lead bulk

B31 = Tin/lead four layer bulk

Historical Part Numbering example: CPSL-5-3 0.05 Ω 5 ꢀ B14

CPSL-5-3

0.05 Ω

5 ꢀ

B14

HISTORICAL MODEL

RESISTANCE VALUE

TOLERANCE CODE

PACKAGING

Document Number: 30217

Revision: 22-Dec-11

For technical questions, contact: ww2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CPSL

Vishay Dale

www.vishay.com

DIMENSIONS in inches [millimeters]

CPSLxx...3

CPSLxx...5

1.0 [25.4]

min.

1.0 [25.4]

min.

1.50 0.0ꢀ2

[38.1 1.5ꢁ]

1.50 0.0ꢀ2

[38.1 1.5ꢁ]

DIMENSIONS in inches [millimeters]

GLOBAL

MODEL

A ⁽¹⁾

0.031 [0.794]

0.875 [22.22]

1.391 [35.32]

1.875 [47.62]

0.031 [0.794]

0.313 [7.94]

0.375 [9.52]

0.500 [12.70]

0.031 [0.794]

0.001 [0.025]

0.036 [0.914]

0.0ꢁ3 [1.59]

CPSL03...5

CPSL03...3

CPSL05...5

CPSL05...3

CPSL07...5

CPSL10...5

CPSL15...5

0.313 [7.94]

0.344 [8.73]

0.500 [12.70]

0.563 [14.30]

1.000 [25.40]

1.375 [34.93]

0.375 [9.52]

0.438 [11.11]

Note

(1)

Potting compound may extend outside of ceramic case up to 0.060 [1.52] maximum per side.

MATERIAL SPECIFICATIONS

DERATING

120

Element: Self-supporting copper-nickel alloy or nickel-

chrome alloy, depending on resistance value

100

Body: Steatite ceramic case with inorganic potting

compound

Terminals: Tinned copper

Part Marking: Dale, model, wattage, value, tolerance, date

code

- 65 - 25

125

175

225

275

AMBIENT TEMPERATURE IN °C

PERFORMANCE

TEST

CONDITIONS OF TEST

- 55 °C to + 275 °C, 5 cycles, 30 min dwell time

5 x rated power for 5 s

TEST LIMITS

Thermal Shock

Short Time Overload

(5.0 % + 0.05 Ω) ΔR

(4.0 % + 0.05 Ω) ΔR

(2.0 % + 0.05 Ω) ΔR

(3.0 % + 0.05 Ω) ΔR

(5.0 % + 0.05 Ω) ΔR

Dielectric Withstanding Voltage 1000 V_RMSfor 1 min

Low Temperature Operation

Bias Humidity

- 65 °C, full rated working voltage for 45 min

75 °C, 90 % to 100 % RH, 240 h

Load Life

1000 h at rated power, + 40 °C, 1.5 h “ON”, 0.5 h “OFF”

Terminal Strength

Resistance to Solder Heat

5 s to 10 s 10 pound pull test, torsion test - 3 alternating directions, 360° each

Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body

(1.0 % + 0.05 Ω) ΔR

Revision: 22-Dec-11

Document Number: 30217

For technical questions, contact: ww2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Revision: 08-Feb-17

Document Number: 91000

相关型号：