CRA06E043RGTA [VISHAY]

Thick Film Resistor Array; 厚膜电阻阵列


型号：	CRA06E043RGTA
厂家：	VISHAY
描述：	Thick Film Resistor Array 厚膜电阻阵列
文件：	总4页 (文件大小：130K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

CRA06E, CRA06S

Vishay

Thick Film Resistor Array

FEATURES

• Convex terminal array available with either

scalloped corners (E version) or square corners

(S version)

• Wide ohmic range: 10R to 1M0

• 4 or 8 terminal package with isolated resistors

• Lead (Pb)-free solder contacts on Ni barrier layer

• Pure tin plating provides compatibility with Lead (Pb)-free

and lead containing soldering processes

• Compatible with "Restriction of the use of Hazardous

Substances" (RoHS) directive 2002/95/EC (issue 2004)

CRA06E and CRA06S Thick Film resistor arrays are

constructed on a high grade ceramic body with convex

terminations. A small package enables the design of high

density circuits. The single component reduces board space,

component counts and assembly costs.

STANDARD ELECTRICAL SPECIFICATIONS

POWER RATING

LIMITING ELEMENT TEMPERATURE TOLERANCE RESISTANCE

P_{70 °C}

MODEL

CIRCUIT

VOLTAGE MAX.

COEFFICIENT

ppm/K

RANGE

E-SERIES

V≅

100

200

24 + 96

0.063

10R - 1M0

CRA06E

CRA06S

Zero-Ohm-Resistor available; R_max.= 50 mΩ, I_max.= 1 A

TECHNICAL SPECIFICATIONS

PARAMETER

UNIT

CRA06E & S

Rated Dissipation at 70 °C ⁽²⁾

Limiting Element Voltage ⁽¹⁾

Insulation Voltage (1 min)

Category Temperature Range

Insulation Resistance

W per element

0.063

100

V≅

V_{dc/ac peak}

°C

- 55 to + 155

> 10⁹

Notes

(1)

(2)

Rated voltage: P × R

The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support of the

printed-circuit board (thermal resistance). The rates dissipation applies only if the permitted film temperature of 155 °C is not exceed.

PART NUMBER AND PRODUCT DESCRIPTION

PART NUMBER: CRA06S08347K0JTA ⁽³⁾

CIRCUIT

TOLERANCE

PACKAGING ⁽⁴⁾

SPECIAL

MODEL

VALUE

TERMINAL STYLE

CRA06

Up to 2 digits

3 = 03

R = Decimal

K = Thousand

F = 1 ꢀ

G = 2 ꢀ

M = Million

J = 5 ꢀ

0000 = 0 Ω Jumper

Z = 0 Ω Jumper

PRODUCT DESCRIPTION: CRA06S 08 03 473 J RT1 e3

473

CRA06S

RT1

PACKAGING ⁽⁴⁾

MODEL

TOLERANCE

TERMINAL COUNT

CIRCUIT TYPE

RESISTANCE VALUE

LEAD (Pb)-FREE

e3 = Pure tin

Termination finish

473 = 47 kΩ

4702 = 47 kΩ

10R0 = 10 Ω

100 = 10 Ω

000 = 0 Ω Jumper

F = 1 ꢀ

G = 2 ꢀ

J = 5 ꢀ

RT1

RT6

CRA06S

CRA06E

Z = 0 Ω Jumper

First two digits (3 for 1 ꢀ)

are significant. Last

digit is the multiplier.

Notes

⁽³⁾Preferred way for ordering products is by use of the PART NUMBER

⁽⁴⁾Please refer to table PACKAGING, see next page

www.vishay.com

252

For technical questions, contact: filmresistors.thickfilmchip@vishay.com

Document Number: 31002

Revision: 13-Oct-08

CRA06E, CRA06S

Thick Film Resistor Array

Vishay

AVAILABLE TYPES AND RANGES

TEMPERATURE

MODEL

TERMINAL COUNT

CIRCUIT

TOLERANCE

COEFFICIENT

100 ppm/K

200 ppm/K

100 ppm/K

200 ppm/K

100 ppm/K

200 ppm/K

1 %

5 %; 2 %

1 %

CRA06S

5 %; 2 %

1 %

CRA06E

5 %; 2 %

PACKAGING

PACKAGING CODE

PAPER TAPE

PRODUCT DESCRIPTION

MODEL

TAPE WIDTH

DIAMETER

PITCH

PIECES/REEL

PART NUMBER

180 mm/7"

4 mm

5000

RT1

RT6

CRA06

8 mm

330 mm/13"

20 000

CIRCUIT

120

100

03 CIRCUIT

8 pin

4 pin

- 55

- 25

100

125

155 175

Ambient Temperature in °C

Derating

DIMENSIONS

S-Version

E-Version

103

PIN 1

DIMENSIONS [in millimeters]

SOLDER PAD DIMENSIONS [in millimeters]

NO#

MODEL

A₁

0.38 0.61

0.38

0.38 0.61

0.3

MODEL

CRA06S

PINS

CRA06S

CRA06E

CRA06S

1.6

3.2

0.3

0.8

0.5

0.1

1.5

0.15

0.8

3.1

0.36

0.44

1.15

CRA06E

CRA06S

0.8

3.1

0.36

0.8

0.44

1.15

0.63

TOL. 0.15 0.15 0.15 0.15 0.15

0.1

Document Number: 31002

Revision: 13-Oct-08

For technical questions, contact: filmresistors.thickfilmchip@vishay.com

www.vishay.com

253

CRA06E, CRA06S

Thick Film Resistor Array

Vishay

TEST PROCEDURES AND REQUIREMENTS

EN 60115-1

REQUIREMENTS

PERMISSIBLE CHANGE (ΔR/R) ⁽¹⁾

TEST

(clause)

CONDITIONS OF TEST

STABILITY

CLASS 2 OR BETTER

CLASS 1 OR BETTER

Stability for product types:

10 Ω to 1 MΩ

CRA06E/CRA06S

Resistance (4.5)

1 %

2 %; 5 %

20/- 55/20 °C and

20/125/20 °C

Temperature coefficient (4.8.4.2)

100 ppm/K

200 ppm/K

U = 2.5 × (P₇₀x R)^1/2

≤ 2 x U_max.; 0.5 s

Overload (4.13)

(0.25 % R + 0.05 Ω)

(0.5 % R + 0.05 Ω)

Aging 4 h at 155 °C, dryheat

solder bath method; 235 °C; 2 s

visual examination

Good tinning (≥ 95 % covered)

no visible damage

Solderability (4.17.5) ⁽²⁾

Solder bath method;

(260 5) °C; (10 1) s

Resistance to soldering heat (4.18.2)

Rapid change of temperature (4.19)

Damp heat, steady state (4.24)

(0.25 % R + 0.05 Ω)

(0.5 % R + 0.05 Ω)

(2 % R + 0.1 Ω)

30 min at LCT = - 55 °C;

30 min at UCT = 125 °C; 5 cycles

(0.25 % R + 0.05 Ω)

(1 % R + 0.05 Ω)

(40 2) °C; 56 days;

(93 3) % RH

16 h at UCT = 125 °C; 1 cycle at 55 °C;

2 h at LCT = - 55 °C;

1 h/1 kPa at 15 °C to 35 °C;

5 cycles at 55 °C

Climatic sequence (4.23)

(1 % R + 0.05 Ω)

(2 % R + 0.1 Ω)

U = (P₇₀x R)^1/2

U = U_max.; whichever is less severe

U = (P₇₀x R)^1/2

U = U_max.; whichever is less severe

1.5 h ON; 0.5 h OFF;

Endurance at 70 °C (4.25.1)

(1 % R + 0.05 Ω)

(2 % R + 0.1 Ω)

70 °C; 1000 h

Extended endurance (4.25.1.8)

Duration extended to 8000 h

UCT = 125 °C; 1000 h

(2 % R + 0.1 Ω)

(1 % R + 0.05 Ω)

(4 % R + 0.1 Ω)

(2 % R + 0.1 Ω)

Endurance at upper category

temperature (4.25.3)

Notes

(1)

Figures are given for a single element

Solderability is specified for 2 years after production or requalification. Permitted storage time is 20 years

(2)

APPLICABLE SPECIFICATIONS

• EN 60115-1

• EN 140400

• EN 140401-802

• IEC 60068-2-X

• EIA 481

Generic Specification

Sectional Specification

Detail Specification

Variety of environmental test procedures

Packaging of SMD components

www.vishay.com

254

For technical questions, contact: filmresistors.thickfilmchip@vishay.com

Document Number: 31002

Revision: 13-Oct-08

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.

Revision: 02-Oct-12

Document Number: 91000

CRA06E043RGTA [VISHAY]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E