CRCW040226K1FKEDHP [VISHAY]

RES SMD 26.1K OHM 1% 1/5W 0402;


型号：	CRCW040226K1FKEDHP
厂家：	VISHAY
描述：	RES SMD 26.1K OHM 1% 1/5W 0402
文件：	总10页 (文件大小：154K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

CRCW-HP e3

Vishay Draloric

www.vishay.com

Pulse Proof, High Power Thick Film Chip Resistors

FEATURES

• Excellent pulse load capability

• Enhanced power rating

• Double side printed resistor element

• AEC-Q200 qualified

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

APPLICATIONS

• Automotive

• Industrial

LINKS TO ADDITIONAL RESOURCES

3D Models

• Commercial

• High power

The pulse proof, high power thick film chip resistors series

is the perfect choice for most fields of power measurement

electronics where reliability, stability, high power rating and

excellent pulse load performance are of major concern.

Typical applications include battery management systems

in automotive appliances.

TECHNICAL SPECIFICATIONS

CRCW0402- CRCW0603- CRCW0805- CRCW1206- CRCW1210- CRCW1218- CRCW2010- CRCW2512-

DESCRIPTION

HP e3

0402

HP e3

0603

HP e3

0805

HP e3

1206

HP e3

1210

HP e3

1218

HP e3

2010

HP e3

2512

Imperial size

Metric size code

RR1005M

RR1608M

RR2012M

RR3216M

RR3225M

RR3246M

RR5025M

RR6332M

Resistance range

Resistance tolerance

Temperature coefficient

1  to 1 M; jumper (0 )

5 %; 1 %; 0.5 %

200 ppm/K; 100 ppm/K

(1)

Rated dissipation, P₇₀

0.2 W ⁽²⁾

50 V

0.33 W

75 V

0.5 W

150 V

0.75 W ⁽³⁾

0.75 W

1.5 W

200 V

1.0 W

400 V

1.5 W

500 V

Operating voltage,

200 V

U_max.AC_RMS/DC

Permissible film

temperature, _{F max.}

155 °C

(1)

Operating temperature

range

-55 °C to +155 °C

Max. resistance change

at P₇₀for resistance

range, |R/R| after:

1000 h

8000 h

 2.0 %

 4.0 %

Permissible voltage

against ambient

(insulation):

1 min, U_ins

75 V

100 V

200 V

300 V

Failure rate: FIT _observed

 0.1 x 10^-9/h

Notes

•

Marking: see document “Surface Mount Resistor Marking” (www.vishay.com/doc?20020)

Please refer to APPLICATION INFORMATION below

CRCW0402-HP resistors feature a single side printed resistive layer only

Specified power rating requires a thermal resistance of R_th 110 K/W

(1)

(2)

(3)

APPLICATION INFORMATION

When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal

resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted

film temperature is not exceeded.

These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift

increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a

functional lifetime.

Revision: 27-Oct-2020

Document Number: 20043

For technical questions, contact: thickfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CRCW-HP e3

Vishay Draloric

www.vishay.com

TEMPERATURE COEFFICIENT AND RESISTANCE RANGE

TYPE / SIZE

TCR

TOLERANCE

RESISTANCE

E-SERIES

200 ppm/K

5 %

1  to 1 M

E24

1 %

CRCW0402-HP e3

100 ppm/K

1  to 1 M

E24; E96

0.5 %

 10 m

5 %

Jumper, I_max.= 3 A

0 

1  to 1 M

200 ppm/K

E24

1 %

CRCW0603-HP e3

CRCW0805-HP e3

CRCW1206-HP e3

CRCW1210-HP e3

CRCW1218-HP e3

CRCW2010-HP e3

CRCW2512-HP e3

100 ppm/K

1  to 1 M

E24; E96

0.5 %

 8 m

5 %

Jumper, I_max.= 5 A

0 

1  to 1 M

200 ppm/K

E24

1 %

100 ppm/K

1  to 1 M

E24; E96

0.5 %

 5 m

5 %

Jumper, I_max.= 6 A

0 

1  to 1 M

200 ppm/K

E24

1 %

100 ppm/K

1  to 1 M

E24; E96

0.5 %

 5 m

5 %

Jumper, I_max.= 10 A

0 

1  to 1 M

200 ppm/K

E24

1 %

100 ppm/K

1  to 1 M

E24; E96

0.5 %

 4 m

5 %

Jumper, I_max.= 12 A

0 

1  to 1 M

200 ppm/K

E24

1 %

100 ppm/K

1  to 1 M

E24; E96

0.5 %

 4 m

5 %

Jumper, I_max.= 20 A

0 

1  to 1 M

200 ppm/K

E24

1 %

100 ppm/K

1  to 1 M

E24; E96

0.5 %

 5 m

5 %

1 %

0.5 %

 5 m

Jumper, I_max.= 12 A

0 

1  to 1 M

200 ppm/K

E24

100 ppm/K

1  to 1 M

0 

E24; E96

Jumper, I_max.= 16 A

Note

•

The temperature coefficient of resistance (TCR) is not specified for 0  jumpers

PACKAGING

TYPE / SIZE

CODE

QUANTITY

PACKAGING STYLE

WIDTH

PITCH

DIMENSIONS

Ø 180 mm / 7"

Ø 330 mm / 13"

Ø 180 mm / 7"

Ø 285 mm / 11.25"

Ø 330 mm / 13"

Ø 180 mm / 7"

Ø 285 mm / 11.25"

Ø 330 mm / 13"

Ø 180 mm / 7"

Ø 285 mm / 11.25"

Ø 330 mm / 13"

Ø 180 mm / 7"

Ø 285 mm / 11.25"

Ø 330 mm / 13"

Ø 180 mm / 7"

Ø 285 mm / 11.25"

Ø 330 mm / 13"

Ø 180 mm / 7"

Ø 330 mm / 13"

ED = ET7

EE = EF4

EI = ET2

10 000

50 000

5000

10 000

20 000

5000

10 000

20 000

5000

10 000

20 000

5000

10 000

20 000

5000

10 000

20 000

4000

16 000

2000

CRCW0402-HP e3

2 mm

ED = ET3

EL = ET4

EE = ET8

EA = ET1

EB = ET5

EC = ET6

EA = ET1

EB = ET5

EC = ET6

EA = ET1

EB = ET5

EC = ET6

EA = ET1

EB = ET5

EC = ET6

EK = ET9

EF = E02

EJ = E08

EG = E67

EH = E82

2 mm

CRCW0603-HP e3

4 mm

Paper tape acc. to

IEC 60286-3, type 1a

8 mm

CRCW0805-HP e3

CRCW1206-HP e3

CRCW1210-HP e3

CRCW1218-HP e3

CRCW2010-HP e3

4 mm

8 mm

4 mm

Blister tape acc. to

IEC 60286-3, type 2a

12 mm

CRCW2512-HP e3

Ø 180 mm / 7"

4000

Revision: 27-Oct-2020

Document Number: 20043

For technical questions, contact: thickfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CRCW-HP e3

Vishay Draloric

www.vishay.com

PART NUMBER AND PRODUCT DESCRIPTION

Part Number: CRCW0603562RFKEAHP

Part Number: CRCW06030000Z0EAHP

TYPE / SIZE

VALUE

TOLERANCE

TCR

PACKAGING

SPECIAL

CRCW0402

CRCW0603

CRCW0805

CRCW1206

CRCW1210

CRCW1218

CRCW2010

CRCW2512

R = decimal

K = thousand

M = million

D = 0.5 %

F = 1 %

J = 5 %

Z = jumper

K = 100 ppm/K

N = 200 ppm/K

0 = jumper

Up to 2 digits

HP = pulse proof,

high power

0000 = jumper

Product Description: CRCW0603-HP 100 562R 1 % ET1 e3

Product Description: CRCW0603-HP 0R0 ET1 e3

CRCW0603-HP

100

562R

1 %

ET1

TYPE / SIZE

TCR

RESISTANCE VALUE

TOLERANCE

PACKAGING

LEAD

CRCW0402-HP

CRCW0603-HP

CRCW0805-HP

CRCW1206-HP

CRCW1210-HP

CRCW1218-HP

CRCW2010-HP

CRCW2512-HP

100 ppm/K

200 ppm/K

10R = 10 

562R = 562 

10K = 10 k

1M = 1 M

0ꢀ5 %

1 %

5 %

ET1, ET2,

ET3, ET4,

ET5, ET6,

ET7, ET8,

ET9, EF4,

E02, E08,

E67, E82

e3 = pure tin

termination

finish

0R0 = jumper

Revision: 27-Oct-2020

Document Number: 20043

For technical questions, contact: thickfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CRCW-HP e3

Vishay Draloric

www.vishay.com

DESCRIPTION

The products do not contain any of the banned

substances as per IEC 62474, GADSL, or the SVHC list,

see www.vishay.com/how/leadfree.

Production is strictly controlled and follows an extensive set

of instructions established for reproducibility. A cermet film

layer and a glass-over are deposited on both sides of a high

grade (Al₂O₃) ceramic substrate with its prepared inner

contacts on both sides. A special laser is used to achieve

the target value by smoothly fine trimming the resistive layer

without damaging the ceramics. The resistor elements are

covered by a protective coating designed for electrical,

mechanical and climatic protection. The terminations

receive a final pure tin on nickel plating. A three or

four-character code marking designates the resistance

values in accordance with IEC 60062. The three-character

code system is applicable to values from E24 series only,

while the four-character code system is applicable to values

from E96 and E24 series.

Hence the products fully comply with the following

directives:

• 2000/53/EC End-of-Life Vehicle Directive (ELV) and

Annex II (ELV II)

• 2011/65/EU Restriction of the Use of Hazardous

Substances

2015/863/EU

Directive

(RoHS)

with

amendment

• 2012/19/EU Waste Electrical and Electronic Equipment

Directive (WEEE)

Vishay pursues the elimination of conflict minerals from its

supply chain, see the Conflict Minerals Policy at

www.vishay.com/doc?49037.

The result of the determined production is verified by an

extensive testing procedure on 100 % of the individual chip

resistors. Only accepted products are laid directly into the

tape in accordance with IEC 60286-3 Type 1a and

APPROVALS

The resistors are qualified according to AEC-Q200.

Where applicable, the resistors are tested in accordance

with EN 140401-802 which refers to EN 60115-1,

EN 60115-8 and the variety of environmental test

procedures of the IEC 60068 ⁽¹⁾series.

Type 2a ⁽¹⁾

ASSEMBLY

The resistors are suitable for processing on automatic SMD

assembly systems. They are suitable for automatic

soldering wave, reflow or vapor phase as shown in

IEC 61760-1 ⁽¹⁾. The encapsulation is resistant to all

cleaning solvents commonly used in the electronics

industry, including alcohols, esters and aqueous solutions.

The suitability of conformal coatings, potting compounds

and their processes, if applied, shall be qualified by

appropriate means to ensure the long-term stability of the

whole system.

RELATED PRODUCTS

For more information about products with superior surge

and pulse performance please refer to datasheet:

D/CRCW-IF e3, Pulse Proof Thick Film Chip Resistors 

www.vishay.com/doc?20024.

For thick film resistors with standard requirements for power

rating, please refer to datasheet:

D/CRCW e3, Standard Thick Film Chip

www.vishay.com/doc?20035.

The resistors are RoHS-compliant, the pure tin plating

For anti-surge products and high power rating, please refer

to datasheet:

RCS e3, Anti-Surge High Power Thick Film Chip Resistors 

www.vishay.com/doc?20065.

provides

compatibility

with

lead

(Pb)-free

and

lead-containing soldering processes. Solderability is

specified for 2 years after production or requalification. The

permitted storage time is 20 years. The immunity of the

plating against tin whisker growth has been proven under

extensive testing.

MATERIALS

Vishay acknowledges the following systems for the

regulation of hazardous substances:

• IEC 62474, Material Declaration for Products of and for the

Electrotechnical Industry, with the list of declarable

substances given therein ⁽²⁾

• The Global Automotive Declarable Substance List

(GADSL) ⁽³⁾

• The REACH regulation (1907/2006/EC) and the related list

(4)

of substances with very high concern (SVHC)

supply chain

for its

Notes

(1)

(2)

(3)

(4)

The quoted IEC standards are also released as EN standards with the same number and identical contents

The IEC 62474 list of declarable substances is maintained in a dedicated database, which is available at http://std.iec.ch/iec62474

The Global Automotive Declarable Substance List (GADSL) is maintained by the American Chemistry Council and available at www.gadsl.org

The SVHC list is maintained by the European Chemical Agency (ECHA) and available at http://echa.europa.eu/candidate-list-table

Revision: 27-Oct-2020

Document Number: 20043

For technical questions, contact: thickfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CRCW-HP e3

Vishay Draloric

www.vishay.com

FUNCTIONAL PERFORMANCE

Single Pulse

Axis Title

10 000

1000

100

10000

CRCW2512-HP

CRCW1218-HP

CRCW2010-HP

CRCW1210-HP

CRCW1206-HP

CRCW0805-HP

CRCW0603-HP

CRCW0402-HP

1000

100

0.1

0.01

0.000001

0.00001

0.0001

0.001

0.01

0.1

100

t_i- Pulse Duration (s)

Maximum pulse load, single pulse; applicable if P  0 and n < 1000 and Û  Û_max.

;

for permissible resistance change equivalent to 8000 h operation

Continuous Pulse

Axis Title

10 000

1000

100

10000

1000

100

CRCW2512-HP

CRCW1218-HP

CRCW2010-HP

CRCW1210-HP

CRCW1206-HP

CRCW0805-HP

CRCW0603-HP

CRCW0402-HP

0.1

0.01

0.000001

0.00001

0.0001

0.001

0.01

0.1

100

t_i- Pulse Duration (s)

Maximum pulse load, continuous pulses; applicable if P P (_amb) and Û  Û_max.

;

for permissible resistance change equivalent to 8000 h operation

Revision: 27-Oct-2020

Document Number: 20043

For technical questions, contact: thickfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CRCW-HP e3

Vishay Draloric

www.vishay.com

Pulse Voltage

Axis Title

2000

10000

1000

100

CRCW2512-HP

1800

1600

1400

1200

1000

800

600

400

200

CRCW2010-HP

CRCW1206-HP, CRCW1210-HP, CRCW1218-HP

CRCW0805-HP

CRCW0603-HP

CRCW0402-HP

0.000001

0.00001

0.0001

0.001

0.01

0.1

t_i- Pulse Duration (s)

Maximum pulse voltage, single and continuous pulses; applicable if P  P

;

max.

for permissible resistance change equivalent to 8000 h operation

Derating

Axis Title

1.8

1.6

1.4

1.2

1.0

0.8

0.6

0.4

0.2

10000

1000

100

CRCW1218-HP, CRCW2512-HP

CRCW2010-HP

CRCW1206-HP, CRCW1210-HP

CRCW0805-HP

CRCW0603-HP

CRCW0402-HP

-70 -60 -50 -40 -30 -20 -10

10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160

ϑ_amb- Ambient Temperature (°C)

Revision: 27-Oct-2020

Document Number: 20043

For technical questions, contact: thickfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CRCW-HP e3

Vishay Draloric

www.vishay.com

TESTS AND REQUIREMENTS

All executed tests are carried out in accordance with the

following specifications:

The testing also covers most of the requirements specified

by EIA/IS-703 and JIS-C-5201-1.

EN 60115-1, generic specification

The tests are carried out under standard atmospheric

conditions in accordance with IEC 60068-1, 4.3, whereupon

the following values are applied:

EN 60115-8 (successor of EN 140400), sectional

specification

Temperature: 15 °C to 35 °C

EN 140401-802, detail specification

IEC 60068-2-xx, test methods

Relative humidity: 25 % to 75 %

Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).

The parameters stated in the Test Procedures and

Requirements table are based on the required tests

and permitted limits of EN 140401-802. The table presents

only the most important tests, for the full test schedule refer

to the documents listed above. However, some additional

tests and a number of improvements against those

minimum requirements have been included.

A climatic category LCT / UCT / 56 is applied, defined by the

lower category temperature (LCT), the upper category

temperature (UCT), and the duration of exposure in the

damp heat, steady state test (56 days).

The components are mounted for testing on boards in

accordance with EN 60115-8, 2.4.2 unless otherwise

specified.

TEST PROCEDURES AND REQUIREMENTS

IEC

EN 60115-1 60068-2 ⁽¹⁾

REQUIREMENTS

PERMISSIBLE CHANGE (R)

TEST

PROCEDURE

CLAUSE

TEST

METHOD

Stability for product types:

CRCW-HP e3

STABILITY CLASS 2 OR BETTER

1 to 1 M

4.5

4.8

Resistance

0.5 %; 1 %; 5 %

Temperature

coefficient

(20 / -55 / 20) °C and

(20 / 155 / 20) °C

100 ppm/K; 200 ppm/K

U = P₇₀x R or U = U_max.;

whichever is the less severe;

1.5 h on; 0.5 h off

4.25.1

Endurance at 70 °C

70 °C; 1000 h

70 °C; 8000 h

(2 % R + 0.1 )

(4 % R + 0.1 )

Endurance at

upper category

temperature

4.25.3

4.24

155 °C, 1000 h

(2 % R + 0.1 )

(1 % R + 0.05 )

(2 % R + 0.1 )

(40 2) °C; 56 days;

(93 3) % RH;

Damp heat,

steady state

78 (Cab)

67 (Cy)

(85 2) °C; (85 5) % RH;

Damp heat,

steady state,

accelerated

4.37

U = 0.1 x P x R  100 V;

1000 h

4.23

Climatic sequence:

dry heat

4.23.2

2 (Bb)

125 °C; 16 h

55 °C; 24 h;  90 % RH;

4.23.3

30 (Db)

damp heat, cyclic

1 cycle

4.23.4

4.23.5

1 (Ab)

13 (M)

cold

-55 °C; 2 h

(2 % R + 0.1 )

low air pressure

8.5 kPa; 2 h; (25 10) °C

55 °C; 24 h;

 90 % RH;

5 cycles

4.23.6

30 (Db)

damp heat, cyclic

4.23.7

DC load

Cold

U = P₇₀x R  U_max.;1 min

1 (Aa)

-55 °C; 2 h

(0.5 % R + 0.05 )

Revision: 27-Oct-2020

Document Number: 20043

For technical questions, contact: thickfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CRCW-HP e3

Vishay Draloric

www.vishay.com

TEST PROCEDURES AND REQUIREMENTS

IEC

EN 60115-1 60068-2 ⁽¹⁾

REQUIREMENTS

PERMISSIBLE CHANGE (R)

TEST

PROCEDURE

CLAUSE

TEST

METHOD

Stability for product types:

CRCW-HP e3

STABILITY CLASS 2 OR BETTER

1 to 1 M

30 min at -55 °C and

30 min at 125 °C;

1000 cycles

Rapid change of

temperature

(1 % R + 0.05 )

4.19

4.13

14 (Na)

no visible damage

U = 2.5 x P₇₀x R  2 x U_max.;

whichever is the less severe;

5 s

Short time overload

(2 % R + 0.05 )

Severity no. 4:

U = 10 x P₇₀x R or

U = 2 x U_max.;

whichever is the less severe;

10 pulses 10 μs/700 μs

Single pulse high

voltage overload

(1 % R + 0.05 )

no visible damage

4.27

U = 15 x P₇₀x R or

U = 2 x U_max.;

whichever is the less severe;

0.1 s on; 2.5 s off;

1000 cycles

Periodic electric

overload

(1 % R + 0.05 )

4.39

4.38

no visible damage

Electrostatic

discharge

(human body model)

IEC 61340-3-1 ⁽¹⁾

;

3 pos. + 3 neg. discharges;

ESD voltage acc. to the size

(1 % R + 0.05 )

Endurance by sweeping;

10 Hz to 2000 Hz;

no resonance;

(0.5 % R + 0.05 )

no visible damage

4.22

6 (Fc)

Vibration

amplitude  1.5 mm or

 200 m/s²;

7.5 h

Solder bath method;

Sn60Pb40

non-activated flux;

(235 5) °C;

(2 0.2) s

Good tinning ( 95 % covered)

4.17

58 (Td)

Solderability

no visible damage

Solder bath method;

Sn96.5Ag3Cu0.5

non-activated flux;

(245 5) °C;

(3 0.3) s

Solder bath method

(260 5) °C;

Resistance to

soldering heat

4.18

4.29

58 (Td)

45 (XA)

(0.5 % R + 0.05 )

(10 1) s

Component solvent

resistance

Isopropyl alcohol;

+50 °C; method 2

No visible damage

CRCW0402-HP and

CRCW0603-HP: 9 N

Shear

(adhesion)

4.32

21 (Uu₃)

No visible damage

CRCW0805-HP to

CRCW2512-HP: 45 N

Depth 2 mm;

3 times

(0.25 % R + 0.05 )

4.33

4.7

21 (Uu₁)

Substrate bending

Voltage proof

no visible damage, no open circuit in bent position

U = 1.4 x U_ins; 60 s

No flashover or breakdown

No burning after 30 s

IEC 60695-11-5 ⁽¹⁾

10 s

;

Flammability,

needle flame test

4.35

Note

(1)

The quoted IEC standards are also released as EN standards with the same number and identical contents

Revision: 27-Oct-2020

Document Number: 20043

For technical questions, contact: thickfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CRCW-HP e3

Vishay Draloric

www.vishay.com

DIMENSIONS

DIMENSIONS AND MASS

(mm)

MASS

(mg)

TYPE / SIZE

(mm)

CRCW0402-HP e3

CRCW0603-HP e3

CRCW0805-HP e3

CRCW1206-HP e3

CRCW1210-HP e3

CRCW1218-HP e3

CRCW2010-HP e3

CRCW2512-HP e3

1.0 0.05

1.6 0.10

2.0 0.15

3.1 0.20

3.2 0.20

3.1 0.20

5.0 0.15

6.3 0.20

0.5 0.05

0.85 0.10

1.25 0.15

1.6 0.15

2.5 0.20

4.6 0.20

2.5 0.15

3.15 0.15

0.3 0.10

0.45 0.10

0.5 0.10

0.5 0.15

0.6 0.10

0.25 0.10

0.3 0.20

0.4 0.20

0.5 0.20

0.45 0.20

0.6 0.20

0.2 0.10

0.3 0.20

0.35 0.20

0.45 0.20

0.4 0.20

0.6 0.20

0.65

5.5

25.5

SOLDER PAD DIMENSIONS

RECOMMENDED SOLDER PAD DIMENSIONS

WAVE SOLDERING

TYPE / SIZE

REFLOW SOLDERING

(mm)

CRCW0402-HP e3

CRCW0603-HP e3

CRCW0805-HP e3

CRCW1206-HP e3

CRCW1210-HP e3

CRCW1218-HP e3

CRCW2010-HP e3

CRCW2512-HP e3

0.45

0.75

1.00

1.50

1.70

3.70

5.00

0.6

1.65

2.25

2.90

3.60

3.90

6.10

7.50

0.65

0.90

1.40

1.80

1.60

3.60

4.90

1.10

1.30

1.40

1.45

1.50

1.65

1.60

1.25

1.60

1.95

2.95

5.10

2.85

3.50

2.85

3.50

4.20

4.70

4.60

6.90

8.10

0.75

0.95

1.05

1.10

1.20

1.25

1.00

1.45

1.8

2.80

4.90

2.70

3.35

Notes

•

The given solder pad dimensions reflect the considerations for board design and assembly as outlined e.g in standards IEC 61188-5-x ⁽¹⁾or

in publication IPC-7351.

Still, the given solder pad dimensions will be found adequate for most general applications

The quoted IEC standards are also released as EN standards with the same number and identical contents

(1)

Revision: 27-Oct-2020

Document Number: 20043

For technical questions, contact: thickfilmchip@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product

with the properties described in the product specification is suitable for use in a particular application. Parameters provided in

datasheets and / or specifications may vary in different applications and performance may vary over time. All operating

parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.

Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited

to the warranty expressed therein.

Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and

for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of

any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.

Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website

or for that of subsequent links.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Revision: 09-Jul-2021

Document Number: 91000

CRCW040226K1FKEDHP [VISHAY]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E