CRHA2512AF1000MFLE5 [VISHAY]

Thick Film Chip Resistors, High Voltage;


型号：	CRHA2512AF1000MFLE5
厂家：	VISHAY
描述：	Thick Film Chip Resistors, High Voltage
文件：	总4页 (文件大小：98K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

CRHA

Vishay Techno

www.vishay.com

Thick Film Chip Resistors, High Voltage

FEATURES

• AEC-Q200 qualified

• High voltage up to 3000 V

• Automatic placement capability

• Tape and reel packaging available

• Termination style: 3-sided wraparound termination

• Internationally standardized sizes

• Termination material: solder-coated nickel barrier

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

LINKS TO ADDITIONAL RESOURCES

3D Models

STANDARD ELECTRICAL SPECIFICATIONS

MAXIMUM

TEMPERATURE

RESISTANCE

POWER RATING

GLOBAL

MODEL

CASE

SIZE

WORKING

VOLTAGE ⁽¹⁾

TOLERANCE

ꢀ

COEFFICIENT ⁽³⁾

(-55 °C to +155 °C)

ppmꢁ°C

P_{70 °C}

RANGE ⁽²⁾

CRHA1206

CRHA1210

CRHA2010

CRHA2510

CRHA2512

1206

1210

2010

2510

2512

0.30

0.45

0.50

0.60

1.0

1500

1750

2000

2500

3000

2M to 100M

4M to 100M

6M to 100M

10M to 500M

1, 2, 5, 10, 20

100

Notes

(1)

(2)

(3)

Continuous working voltage shall be P x R or maximum working voltage, whichever is less

Resistance values are calibrated at 100 V_DC. Calibration at other voltages available upon request

Reference only: not for all values specified. Consult factory for your size and value

GLOBAL PART NUMBER INFORMATION

Global Part Numbering: CRHA1206AF100MFKFB

GLOBAL

MODEL

TERMINAL

STYLE

TERMINAL

MATERIAL

RESISTANCE

VALUE

SOLDER

TERMINATION

SIZE

TOLERANCE

TCR

PACKAGING

CRHA

1206 A = 3-sided

F = nickel

barrier

M = MΩ

4M70 = 4.7 MΩ

10M0 = 10 MΩ

F = 1 ꢀ

G = 2 ꢀ

J = 5 ꢀ

K = 10 ꢀ

M = 20 ꢀ

K = 100 ppm

L = 150 ppm

N = 200 ppm

R = 250 ppm

M = 300 ppm

W = 350 ppm

P = 500 ppm

E = Sn100

B = bulk

(250 pcs max.)

F = T/R

1210

2010

2510

2512

(full reel)

1 = T/R

(1000 pcs)

5 = T/R

(500 pcs)

T = T/R

(250 pcs min.)

Note

For additional information on packaging, refer to the Surface Mount Resistor Packaging document (www.vishay.com/doc?31543)

•

Revision: 19-May-2021

Document Number: 68048

For technical questions, contact: te1resistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CRHA

Vishay Techno

www.vishay.com

MECHANICAL SPECIFICATIONS

DERATING CURVE

Resistive element

Encapsulation

Substrate

Ruthenium oxide

Axis Title

120

100

10000

1000

100

Glass

96 ꢀ alumina

Nickel barrier (standard)

Pure tin

Termination

Solder finish

ENVIRONMENTAL SPECIFICATIONS

Operating temperature

-55 °C to +155 °C

Less than 1.0 ꢀ change when

tested at full rated power

Life

Short time overload

Less than 0.5 ꢀ ΔR

-55 -25

25 50 70 100 125 155 175

Ambient Temperature (°C)

Note

•

Reference only: not for all values specified. Consult factory for

your size and value

VOLTAGE COEFFICIENT OF RESISTANCE CHART

SIZE

VALUE (Ω)

2M to 100M

4M to 100M

6M to 100M

10M to 99M

100M to 500M

10M to 500M

VCR (ppmꢁV)

CRHA1206

CRHA1210

CRHA2010

CRHA2510

CRHA2512

DIMENSIONS in inches (millimeters)

Termination Style A

Termination Style B

(3-sided wraparound)

(top conductor only)

0ꢂ025 (0ꢂ635)

maxꢂ

LENGTH (L)

0ꢂ006 (0ꢂ152)

WIDTH (W)

0ꢂ006 (0ꢂ152)

THICKNESS (T)

0ꢂ004 (0ꢂ102)

MODEL

CRHA1206

CRHA1210

CRHA2010

CRHA2510

CRHA2512

0.125

0.063

0.100

0.126

0.025

0.125

0.025

0.200

0.025

0.250

0.025

0.250

0.025

Revision: 19-May-2021

Document Number: 68048

For technical questions, contact: te1resistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

CRHA

Vishay Techno

www.vishay.com

PERFORMANCE

TEST

CONDITIONS OF TEST

TEST RESULTS (TYPICAL TEST LOTS)

-55 °C to +150 °C, 1000 cycles,

15 min at each extreme

Thermal shock

(1.0 ꢀ + 0.05 Ω)

High temperature exposure

Bias humidity

2000 h at +125 °C

+85 °C, 85 ꢀ RH, 10 ꢀ bias, 1000 h

100 g’s for 6 ms, 5 pulses

(1.0 ꢀ + 0.05 Ω)

(1.0 ꢀ + 0.05 Ω) ⁽¹⁾

(0.5 ꢀ + 0.05 Ω)

Mechanical shock

Frequency varied 10 Hz to 2000 Hz in 1 min,

3 directions, 12 h

Vibration

(0.5 ꢀ + 0.05 Ω)

(1.0 ꢀ + 0.05 Ω)

1000 h at rated power, +70 °C,

1.5 h “ON”, 0.5 h “OFF”

Load life

+260 °C solder, 10 s to 12 s dwell,

25 mm/s emergence

Resistance to solder heat

Moisture resistance

MIL-STD-202, method 106, 0 ꢀ power,

7a and 7b not required

Note

(1)

Due to the high values and small case size, it is recommended the 1206 case size parts be potted for electrical isolation from high humidity

conditions

Revision: 19-May-2021

Document Number: 68048

For technical questions, contact: te1resistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product

with the properties described in the product specification is suitable for use in a particular application. Parameters provided in

datasheets and / or specifications may vary in different applications and performance may vary over time. All operating

parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.

Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited

to the warranty expressed therein.

Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and

for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of

any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.

Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website

or for that of subsequent links.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Revision: 09-Jul-2021

Document Number: 91000

相关型号：