CW-516KOHM5% [VISHAY]

RESISTOR, WIRE WOUND, 5 W, 5 %, 30 ppm, 16000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED;
CW-516KOHM5%
型号: CW-516KOHM5%
厂家: VISHAY    VISHAY
描述:

RESISTOR, WIRE WOUND, 5 W, 5 %, 30 ppm, 16000 ohm, THROUGH HOLE MOUNT, AXIAL LEADED

文件: 总2页 (文件大小:107K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
CW  
Vishay Dale  
Wirewound Resistors, Commercial Coated, Axial Lead  
FEATURES  
• High performance for low cost  
• High temperature silicone coating  
• Complete welded construction  
• Excellent stability in operation  
• High power to size ratio  
STANDARD ELECTRICAL SPECIFICATIONS  
POWER RATING*  
MODEL  
WEIGHT  
(Maximum)  
RESISTANCE RANGE  
P25°C  
W
Characteristic U  
Characteristic V  
± 5%, ± 10%**  
0.1 - 1.77k  
0.1 - 6.37k  
0.1 - 3.3k  
g
+ 250°C  
+ 350°C  
CW-1/2  
CW-1  
0.5  
1.0  
1.0  
4.0  
3.0  
3.0  
4.0  
2.5  
2.5  
5.0  
4.0  
5.0  
7.0  
10.0  
10.0  
0.21  
0.34  
0.3  
2.1  
0.65  
0.7  
0.9  
1.8  
1.2  
4.2  
4.2  
4.2  
4.7  
9.0  
9.0  
CW-1M  
CW-2  
5.5  
0.1 - 28.7k  
0.1 - 12k  
CW-2M  
CW-2B  
CW-2B-13  
CW-2C  
CW-2C-14  
CW-5  
3.75  
3.75  
6.0  
0.1 - 15k  
0.1 - 6k8  
3.25  
3.25  
6.5  
0.1 - 19.9k  
0.1 - 19.9k  
0.1 - 58.5k  
0.1 - 40.3k  
0.1 - 58.5k  
0.1 - 95.2k  
0.1 - 167k  
0.1 - 167k  
CW-5-2  
CW-5-3  
CW-7  
5.0  
6.5  
9.0  
CW-10  
CW-10-3  
13.0  
13.0  
*Vishay Dale CW models have two power ratings, depending on operating temperature and stability requirements.  
**3% tolerance available.  
• Shaded areas indicate most popular models.  
TECHNICAL SPECIFICATIONS  
PARAMETER  
UNIT  
ppm/°C  
VAC  
CW RESISTOR CHARACTERISTICS  
Temperature Coefficient  
Dielectric Withstanding Voltage  
Short Time Overload  
± 90 for below 1.0, ± 50 for 1.0to 9.9, ± 30 for 10and above  
1000  
-
5 x rated power for 5 seconds for 3.75 watt size and smaller,  
10 x rated power for 5 seconds for 4 watt size and greater  
Terminal Strength  
lb  
V
10 minimum  
(P x R)1/2  
Maximum Working Voltage  
Operating Temperature Range  
Power Rating  
°C  
-
Characteristic U = - 65/+ 250, Characteristic V = - 65/+ 350  
Characteristic U = + 250°C max. hot spot temperature, ± 0.5% max. R in 2000 hr. load life  
Characteristic V = + 350°C max. hot spot temperature, ± 3.0% max. R in 2000 hr. load life  
ORDERING INFORMATION  
CW-5  
3kΩ  
RESISTANCE  
5%  
TOLERANCE  
± %  
MODEL  
www.vishay.com  
26  
For technical questions, contact ww2aresistors@vishay.com  
Document Number 30215  
Revision 18-Oct-02  
CW  
Wirewound Resistors, Commercial Coated, Axial Lead  
Vishay Dale  
DIMENSIONS  
MODEL  
DIMENSIONS in inches [millimeters]  
1.50 [38.10]*  
Minimum  
A
B
C
D
C
A
(Maximum)**  
CW-1/2  
CW-1  
0.250 ± 0.031  
[6.35 ± 0.787]  
0.281  
[7.14]  
0.085 ± 0.020 0.020 ± 0.002  
[2.16 ± 0.508] [0.508 ± 0.051]  
0.406 ± 0.031  
[10.31 ± 0.787]  
0.437  
0.094 ± 0.031 0.020 ± 0.002  
D
B
[11.10] [2.39 ± 0.787] [0.508 ± 0.051]  
*On some standard reel pack methods, the leads may be trimmed to  
a shorter length than shown.  
CW-1M  
CW-2  
0.285 ± 0.025  
[7.24 ± 0.635]  
0.311  
[7.90]  
0.110 ± 0.015 0.020 ± 0.002  
[2.79 ± 0.381] [0.508 ± 0.051]  
MATERIAL SPECIFICATIONS  
Element: Copper-nickel alloy or nickel-chrome alloy,  
depending on resistance value  
0.625 ± 0.062  
[15.87 ± 1.57]  
0.765  
.250 ± 0.032 0.040 ± 0.002  
[19.43] [6.35 ± 0.813] [1.02 ± 0.051]  
CW-2M  
CW-2B  
0.500 ± 0.062  
[12.70 ± 1.57]  
0.562  
0.185 ± 0.015 0.032 ± 0.002  
Core: Ceramic: Steatite or alumina, depending on physical  
[14.27] [4.70 ± 0.381] [0.813 ± 0.051]  
size  
0.562 ± 0.062  
[14.27 ± 1.57]  
0.622  
[15.80]  
0.188 ± 0.032 0.032 ± 0.002  
[4.78 ± .813] [0.813 ± 0.051]  
Coating: Special high temperature silicone  
Standard Terminals: Tinned Copperweld®  
End Caps: Stainless steel  
CW-2B-13 0.500 ± 0.062  
[12.70 ± 1.57]  
0.563  
0.188 ± 0.032 0.032 ± 0.002  
[14.30] [4.78 ± 0.813] [0.813 ± 0.051]  
Part Marking: DALE, Model, Wattage*, Value, Tolerance,  
Date Code  
CW-2C  
0.500 ± 0.062  
[12.70 ± 1.57]  
0.593  
0.218 ± 0.032 0.040 ± 0.002  
[15.06] [5.54 ± 0.813] [1.02 ± 0.051]  
*Wattage marked on resistor will be “V” characteristic,  
CW-1/2 will not be marked with wattage  
CW-2C-14 0.500 ± 0.062  
[12.70 ± 1.57]  
0.593  
[15.06]  
0.218 ± 0.032 0.032 ± 0.002  
[5.54 ± .813] [0.813 ± 0.051]  
CW-5  
0.875 ± 0.062  
[22.22 ± 1.57]  
1.0  
0.312 ± 0.032 0.040 ± 0.002  
120  
100  
[25.40] [7.92 ± 0.813] [1.02 ± 0.051]  
CW-5-2  
CW-5-3  
CW-7  
0.875 ± 0.062  
[22.22 ± 1.57]  
1.0  
[25.40]  
0.250 ± 0.032 0.032 ± 0.002  
[6.35 ± .813] [0.813 ± 0.051]  
80  
0.875 ± 0.062  
[22.22 ± 1.57]  
1.0  
0.312 ± 0.032 0.032 ± 0.002  
[25.40] [7.92 ± 0.813] [0.813 ± 0.051]  
60  
CHAR. V  
1.218 ± 0.062  
[30.94 ± 1.57]  
1.281  
0.312 ± 0.032 0.040 ± 0.002  
[32.54] [7.92 ± 0.813] [1.02 ± 0.051]  
40  
CW-10  
CW-10-3  
1.781 ± 0.062  
[45.24 ± 1.57]  
1.875  
0.375 ± 0.032 0.040 ± 0.002  
20  
[47.62] [9.52 ± 0.813] [1.02 ± 0.051]  
CHAR. U  
1.781 ± 0.062  
[45.24 ± 1.57]  
1.875 0.375 ± 0.032 0.032 ± 0.002  
[47.62] [9.52 ± 0.813] [0.813 ± 0.051]  
0
-65 -50  
0
50  
150  
250  
350  
25  
AMBIENT TEMPERATURE IN °C  
Derating  
**B (Maximum) dimension is clean lead to clean lead.  
PERFORMANCE*  
TEST  
CONDITIONS OF TEST  
TEST LIMITS  
(CHARACTERISTIC V)  
± (2.0% + 0.05) R  
± (2.0% + 0.05) R  
± (0.1% + 0.05) R  
± (2.0% + 0.05) R  
± (4.0% + 0.05) R  
± (2.0% + 0.05) R  
± (0.2% + 0.05) R  
± (0.2% + 0.05) R  
± (3.0% + 0.05) R  
± (1.0% + 0.05) R  
Thermal Shock  
Rated power applied until thermally stable, then a minimum of 15 minutes at - 55°C  
5 x rated power (3.75 watt and smaller), 10 x rated power (4 watt and larger) for 5 seconds  
1000V rms, one minute  
Short Time Overload  
Dielectric Withstanding Voltage  
Low Temperature Storage  
High Temperature Exposure  
Moisture Resistance  
Shock, Specified Pulse  
Vibration, High Frequency  
Load Life  
- 65°C for 24 hours  
250 hours at + 350°C  
MIL-STD-202 Method 106, 7b not applicable  
MIL-STD-202 Method 213, 100g’s for 6 milliseconds, 10 shocks  
Frequency varied 10 to 2000Hz, 20g peak, 2 directions 6 hours each  
2000 hours at rated power, + 25°C, 1.5 hours “ON”, 0.5 hours “OFF”  
5 to 10 second 10 pound pull test; torsion test - 3 alternating directions, 360° each  
Terminal Strength  
*All R figures shown are maximum, based upon testing requirements per MIL-PRF-26 at a maximum operating temperature of + 350°C.  
R maximum figures are considerably lower when tested at a maximum operating temperature of + 250°C.  
Document Number 30215  
Revision 18-Oct-02  
For technical questions, contact ww2aresistors@vishay.com  
www.vishay.com  
27  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY