CW00110R00JE70HS [VISHAY]
RES 10 OHM 5% AXIAL;型号: | CW00110R00JE70HS |
厂家: | VISHAY |
描述: | RES 10 OHM 5% AXIAL |
文件: | 总4页 (文件大小:183K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CW - High Surge
www.vishay.com
Vishay Dale
Wirewound Resistors, High Surge Immunity,
Silicone Coated, Axial Lead
FEATURES
• High voltage surge immunity, up to 12 kV
• High temperature silicone coating
• Complete welded construction
• Excellent stability in operation
• High power to size ratio
Available
Available
Available
Available
• Material categorization:
For definitions of compliance please see
www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts
with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details.
STANDARD ELECTRICAL SPECIFICATIONS
POWER RATING (1)
P25 °C
CHARACTERISTIC U
+250 °C
POWER RATING (1)
P25 °C
CHARACTERISTIC V
+350 °C
RESISTANCE
RANGE
WEIGHT
(max.)
g
GLOBAL
MODEL
W
W
TOLERANCE
ꢀ
CW001...HS
CW02B...HS
CW005...HS
CW010...HS
1.0
3.0
-
0.1 to 6.37K
0.1 to 15K
5, 10
5, 10
5, 10
5, 10
0.34
0.7
4.2
9.0
3.75
6.5
5.0
0.1 to 58.5K
0.1 to 167K
10.0
13.0
Note
(1)
Vishay Dale CW models have two power ratings, depending on operating temperature and stability requirements.
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
ppm/°C
VAC
CW RESISTOR CHARACTERISTICS
Temperature Coefficient
Dielectric Withstanding Voltage
30 for 10 and above, 50 for 1.0 to 9.9 , 90 for 0.5 to 0.99
1000
5 x rated power for 5 s for 3.75 W size and smaller,
10 x rated power for 5 s for 4 W size and greater
Short Time Overload
-
Terminal Strength
lb
V
10 minimum
(P x R)1/2
Maximum Working Voltage
Operating Temperature Range
°C
Characteristic U = -65 to +250, characteristic V = -65 to +350
Characteristic U = +250 °C max. hot spot temperature, 0.5 ꢀ max. R in 2000 h load life
Characteristic V = +350 °C max. hot spot temperature, 3.0 ꢀ max. R in 2000 h load life
Power Rating
-
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: CW02B10K00JB12HS (preferred part number format)
C
W
0
2
B
1
0
K
0
0
J
B
1
2
H
S
GLOBAL
MODEL
(5 digits)
VALUE
(5 digits)
TOLERANCE
(1 digit)
PACKAGING
(3 digits)
SPECIAL
(2 digits)
HS =
High Surge
H = 3.0 ꢀ
J = 5.0 ꢀ
K = 10.0 ꢀ
E70 = Lead (Pb)-free, tape/reel, 1K pcs. (CW001 and CW02B)
E73 = Lead (Pb)-free, tape/reel, 500 pcs.
E12 = Lead (Pb)-free, bulk
CW001
CW02B
CW005
CW010
R = Decimal
K = Thousand
1R500 = 1.5
1K500 = 1.5 k
S70 = Tin/lead, tape/reel, 1K pcs. (CW001 and CW02B)
S73 = Tin/lead, tape/reel, 500 pcs.
B12 = Tin/lead, bulk
Revision: 31-Mar-14
Document Number: 30285
1
For technical questions, contact: ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CW - High Surge
www.vishay.com
HIGH VOLTAGE SURGE
Vishay Dale
The surge handling capability is based upon applying an exponential open circuit voltage waveform according to specification
IEC 61000-4-5 (1.2 μs/50 μs) as shown below at an ambient temperature of 25 °C.
U
1.0
B
0.9
0.5
T2
A
0.3
0.1
0.0
T
T1
t
O1
30 ꢀ max.
{
Front time: T1 = 1.67 x T = 1.2 μs 30 ꢀ
Time to half-value: T2 = 50 μs 20 ꢀ
Open circuit voltage waveform at the output of the pulse generator
PEAK SURGE VOLTAGE - IEC 61000-4-5 (1.2 μs/50 μs pulse)
100 000
10 000
1000
12 kV
10 kV
8 kV
6 kV
4 kV
CW010...HS
CW005...HS
CW02B...HS
CW001...HS
100
0.1
1
10
100
1000
10 000
100 000
Resistance (Ω)
MINIMUM RESISTANCE VALUE FOR SURGE VOLTAGE
PEAK SURGE VOLTAGE
GLOBAL
MODEL
4 kV
586
151
15
6 kV
1.7
457
43
8 kV
-
10 kV
-
12 kV
-
CW001...HS
CW02B...HS
CW005...HS
CW010...HS
1.0 k
94
17
1.8 k
171
30
3.0 k
281
50
2.6
7.6
Revision: 31-Mar-14
Document Number: 30285
2
For technical questions, contact: ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CW - High Surge
www.vishay.com
Vishay Dale
DIMENSIONS in inches (millimeters)
1.50 [38.10] (1)
min.
C
A
B
D
DIMENSIONS in inches [millimeters]
MODEL
A
0.406 0.031 [10.31 0.787]
B [MAXIMUM] (2)
C
D
CW001...HS
CW02B...HS
CW005...HS
CW010...HS
0.437 [11.10]
0.622 [15.80]
1.0 [25.40]
0.094 0.031 [2.39 0.787]
0.188 0.032 [4.78 0.813]
0.312 0.032 [7.92 0.813]
0.375 0.032 [9.52 0.813]
0.020 0.002 [0.508 0.051]
0.032 0.002 [0.813 0.051]
0.040 0.002 [1.02 0.051]
0.040 0.002 [1.02 0.051]
0.562 0.062 [14.27 1.57]
0.875 0.062 [22.22 1.57]
1.781 0.062 [45.24 1.57]
1.875 [47.62]
Notes
(1)
On some standard reel pack methods, the leads may be trimmed to a shorter length than shown.
B (maximum) dimension is clean lead to clean lead.
(2)
MATERIAL SPECIFICATIONS
DERATING
120
Element: Copper-nickel alloy or nickel-chrome alloy,
depending on resistance value
100
80
60
40
20
Core: Ceramic: Steatite or alumina, depending on physical
size
Coating: Special high temperature silicone
Standard Terminals: Tinned Copperweld®
End Caps: Stainless steel
Part Marking: DALE, model, wattage (3), value, tolerance,
date code
CHAR. V
CHAR. U
Note
0
(3)
- 50
0
50
150
250
350
Wattage marked on resistor will be “V” characteristic.
- 65
25
AMBIENT TEMPERATURE IN °C
PERFORMANCE
TEST LIMITS (4)
(CHARACTERISTIC V)
TEST
CONDITIONS OF TEST
Thermal Shock
Rated power applied until thermally stable, then a minimum of 15 min at -55 °C
5 x rated power (3.75 W and smaller), 10 x rated power (4 W and larger) for 5 s
(2.0 ꢀ + 0.05 ) R
(2.0 ꢀ + 0.05 ) R
Short Time Overload
Dielectric Withstanding
Voltage
1000 VRMS, 1 min
(0.1 ꢀ + 0.05 ) R
Low Temperature Storage
High Temperature Exposure
Moisture Resistance
Shock, Specified Pulse
Vibration, High Frequency
Load Life
-65 °C for 24 h
(2.0 ꢀ + 0.05 ) R
(4.0 ꢀ + 0.05 ) R
(2.0 ꢀ + 0.05 ) R
(0.2 ꢀ + 0.05 ) R
(0.2 ꢀ + 0.05 ) R
(3.0 ꢀ + 0.05 ) R
(1.0 ꢀ + 0.05 ) R
250 h at +350 °C
MIL-STD-202 Method 106, 7b not applicable
MIL-STD-202 Method 213, 100 g’s for 6 ms, 10 shocks
Frequency varied 10 Hz to 2000 Hz, 20 g peak, 2 directions 6 h each
2000 h at rated power, +25 °C, 1.5 h “ON”, 0.5 h “OFF”
5 s to 10 s 10 pound pull test; torsion test - 3 alternating directions, 360° each
Terminal Strength
Note
(4)
All R figures shown are maximum, based upon testing requirements per MIL-PRF-26 at a maximum operating temperature of +350 °C.
R maximum figures are considerably lower when tested at a maximum operating temperature of +250 °C.
Revision: 31-Mar-14
Document Number: 30285
3
For technical questions, contact: ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号:
CW00110R00JS70
RESISTOR, WIRE WOUND, 1 W, 5 %, 30 ppm, 10 ohm, THROUGH HOLE MOUNT, AXIAL LEADED
VISHAY
CW001117R0KE12
RESISTOR, WIRE WOUND, 1 W, 10 %, 30 ppm, 117 ohm, THROUGH HOLE MOUNT, AXAIL LEADED, ROHS COMPLIANT
VISHAY
CW001118R0JE70
RESISTOR, WIRE WOUND, 1 W, 5 %, 30 ppm, 118 ohm, THROUGH HOLE MOUNT, AXAIL LEADED, ROHS COMPLIANT
VISHAY
CW001118R0KE12
RESISTOR, WIRE WOUND, 1 W, 10 %, 30 ppm, 118 ohm, THROUGH HOLE MOUNT, AXAIL LEADED, ROHS COMPLIANT
VISHAY
CW001118R0KE70
RESISTOR, WIRE WOUND, 1 W, 10 %, 30 ppm, 118 ohm, THROUGH HOLE MOUNT, AXAIL LEADED, ROHS COMPLIANT
VISHAY
CW00111R00JE73
RESISTOR, WIRE WOUND, 1 W, 5 %, 30 ppm, 11 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, GREEN
VISHAY
CW001125R0JE12
RESISTOR, WIRE WOUND, 1 W, 5 %, 30 ppm, 125 ohm, THROUGH HOLE MOUNT, AXAIL LEADED, ROHS COMPLIANT
VISHAY
CW001125R0KE12
RESISTOR, WIRE WOUND, 1 W, 10 %, 30 ppm, 125 ohm, THROUGH HOLE MOUNT, AXAIL LEADED, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明