CW001118R0KE12 [VISHAY]
RESISTOR, WIRE WOUND, 1 W, 10 %, 30 ppm, 118 ohm, THROUGH HOLE MOUNT, AXAIL LEADED, ROHS COMPLIANT;型号: | CW001118R0KE12 |
厂家: | VISHAY |
描述: | RESISTOR, WIRE WOUND, 1 W, 10 %, 30 ppm, 118 ohm, THROUGH HOLE MOUNT, AXAIL LEADED, ROHS COMPLIANT |
文件: | 总3页 (文件大小:160K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CW
Vishay Dale
Wirewound Resistors, Commercial Coated, Axial Lead
FEATURES
• High performance for low cost
Pb-free
• High temperature silicone coating
• Complete welded construction
• Excellent stability in operation
• High power to size ratio
Available
e3
RoHS*
• Lead (Pb)-free version is RoHS compliant
COMPLIANT
STANDARD ELECTRICAL SPECIFICATIONS
POWER RATING** P25 °C W
Characteristic U + 25ꢁ °C Characteristic V + 35ꢁ °C
GLOBAL
MODEL
HISTORICAL
MODEL
RESISTANCE RANGE Ω WEIGHT (Max.)
± 5 ꢀ, ± ±ꢁ ꢀ***
g
CW1/2
CW001
CW01M
CW002
CW02M
CW02B
CW02B...13
CW02C
CW02C...14
CW005
CW005...2
CW005...3
CW007
CW-1/2
CW-1
CW-1M
CW-2
CW-2M
CW-2B
CW-2B-13
CW-2C
CW-2C-14
CW-5
CW-5-2
CW-5-3
CW-7
0.5
1.0
1.0
4.0
3.0
3.0
4.0
2.5
2.5
5.0
4.0
5.0
7.0
10.0
10.0
-
-
-
0.1 - 1.77K
0.1 - 6.37K
0.1 - 3.3K
0.1 - 28.7K
0.1 - 12K
0.21
0.34
0.3
2.1
0.65
0.7
0.9
1.8
1.2
4.2
4.2
4.2
4.7
9.0
9.0
5.5
3.75
3.75
6.0
3.25
3.25
6.5
5.0
6.5
9.0
13.0
13.0
0.1 - 15K
0.1 - 6.8K
0.1 - 19.9K
0.1 - 19.9K
0.1 - 58.5K
0.1 - 40.3K
0.1 - 58.5K
0.1 - 95.2K
0.1 - 167K
0.1 - 167K
CW010
CW010...3
CW-10
CW-10-3
** Vishay Dale CW models have two power ratings, depending on operating temperature and stability requirements
*** 3 % tolerance available
• Shaded areas indicate most popular models
TECHNICAL SPECIFICATIONS
PARAMETER
UNIT
ppm/°C
VAC
CW RESISTOR CHARACTERISTICS
90 for below 1.0 Ω, 50 for 1.0 Ω to 9.9 Ω, 30 for 10 Ω and above
1000
Temperature Coefficient
Dielectric Withstanding Voltage
5 × rated power for 5 sec. for 3.75 W size and smaller,
10 × rated power for 5 sec. for 4 W size and greater
Short Time Overload
-
Terminal Strength
Maximum Working Voltage
Operating Temperature Range
lb
V
°C
10 minimum
(P × R)1/2
Characteristic U = - 65/+ 250, Characteristic V = - 65/+ 350
Characteristic U = + 250 °C max. hot spot temperature, 0.5 % max. ΔR in 2000 hrs. load life
Characteristic V = + 350 °C max. hot spot temperature, 3.0 % max. ΔR in 2000 hrs. load life
Power Rating
-
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CWꢁ2C±ꢁKꢁꢁJB±2±4 (preferred part numbering format)
C
W
ꢁ
2
C
±
ꢁ
K
ꢁ
ꢁ
J
B
±
2
±
4
RESISTANCE
VALUE
R = Decimal
K = Thousand
±R5ꢁꢁ = 1.5 Ω
±K5ꢁꢁ = 1.5 kΩ
TOLERANCE
CODE
H = 3 %
J = 5 %
K = 10 %
SPECIAL
PACKAGING
GLOBAL MODEL
(Dash Number)
(up to 3 digits)
From ±-999
(See Standard Electrical
Specifications Global Model
column for options)
E7ꢁ = Lead (Pb)-free, Tape/Reel 1k pcs
E73 = Lead (Pb)-free, Tape/Reel 500 pcs
E±2 = Lead (Pb)-free, Bulk
D±8 = Lead (Pb)-free, R1R80 Tape/Reel
CW02B...13 pack code for Europe use only
as applicable
S7ꢁ = Tin/Lead, Tape/Reel 1k pcs
S73 = Tin/Lead, Tape/Reel 500 pcs
B±2 = Tin/Lead, Bulk
Historical Part Number example: CW-2C-±4 ±ꢁ kΩ 5 % B±2 (will continue to be accepted)
CW-2C-±4
±ꢁ kΩ
5 %
B±2
HISTORICAL MODEL
RESISTANCE VALUE
TOLERANCE CODE
PACKAGING
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
26
For technical questions, contact: ww2aresistors@vishay.com
Document Number: 30215
Revision: 13-Sep-06
CW
Wirewound Resistors, Commercial Coated, Axial Lead
Vishay Dale
DIMENSIONS
±.5ꢁ [38.±ꢁ]*
Minimum
DIMENSIONS in inches [millimeters]
C
A
B
MODEL
B
A
C
D
(Maximum)***
0.250 0.031
[6.35 0.787]
0.281
[7.14]
0.085 0.020 0.020 0.002
[2.16 0.508] [0.508 0.051]
D
CW±/2
* On some standard reel pack methods, the leads may be trimmed
to a shorter length than shown.
0.406 0.031
[10.31 0.787]
0.437
[11.10]
0.094 0.031 0.020 0.002
[2.39 0.787] [0.508 0.051]
CWꢁꢁ±
MATERIAL SPECIFICATIONS
Element: Copper-nickel alloy or nickel-chrome alloy,
depending on resistance value
0.285 0.025
[7.24 0.635]
0.311
[7.90]
0.110 0.015 0.020 0.002
[2.79 0.381] [0.508 0.051]
CWꢁ±M
CWꢁꢁ2
0.625 0.062
[15.87 1.57]
0.765
[19.43]
0.250 0.032 0.040 0.002
[6.35 0.813] [1.02 0.051]
Core: Ceramic: Steatite or alumina, depending on physical
size
0.500 0.062
[12.70 1.57]
0.562
0.185 0.015 0.032 0.002
[4.70 0.381] [0.813 0.051]
CWꢁ2M
CWꢁ2B
[14.27]
Coating: Special high temperature silicone
Standard Terminals: Tinned Copperweld®
End Caps: Stainless steel
0.562 0.062
[14.27 1.57]
0.622
[15.80]
0.188 0.032 0.032 0.002
[4.78 .813] [0.813 0.051]
0.500 0.062
[12.70 1.57]
0.563
[14.30]
0.188 0.032 0.032 0.002
[4.78 0.813] [0.813 0.051]
CWꢁ2B...±3
CWꢁ2C
Part Marking: DALE, Model, Wattage**, Value, Tolerance,
Date Code
0.500 0.062
[12.70 1.57]
0.593
[15.06]
0.218 0.032 0.040 0.002
[5.54 0.813] [1.02 0.051]
** Wattage marked on resistor will be “V” characteristic, CW1/2 will
not be marked with wattage
0.500 0.062
[12.70 1.57]
0.593
[15.06]
0.218 0.032 0.032 0.002
[5.54 .813] [0.813 0.051]
CWꢁ2C...±4
CWꢁꢁ5
0.875 0.062
[22.22 1.57]
1.0
[25.40]
0.312 0.032 0.040 0.002
[7.92 0.813] [1.02 0.051]
120
100
0.875 0.062
[22.22 1.57]
1.0
[25.40]
0.250 0.032 0.032 0.002
[6.35 .813] [0.813 0.051]
CWꢁꢁ5...2
CWꢁꢁ5...3
CWꢁꢁ7
80
0.875 0.062
[22.22 1.57]
1.0
[25.40]
0.312 0.032 0.032 0.002
[7.92 0.813] [0.813 0.051]
60
CHAR. V
1.218 0.062
[30.94 1.57]
1.281
[32.54]
0.312 0.032 0.040 0.002
[7.92 0.813] [1.02 0.051]
40
1.781 0.062
[45.24 1.57]
1.875
[47.62]
0.375 0.032 0.040 0.002
[9.52 0.813] [1.02 0.051]
CWꢁ±ꢁ
20
CHAR. U
1.781 0.062
[45.24 1.57]
1.875
[47.62]
0.375 0.032 0.032 0.002
[9.52 0.813] [0.813 0.051]
0
CWꢁ±ꢁ...3
- 65 - 50
0
50
150
250
350
25
AMBIENT TEMPERATURE IN °C
Derating
*** B (Maximum) dimension is clean lead to clean lead.
PERFORMANCE****
TEST LIMITS
(CHARACTERISTIC V)
TEST
CONDITIONS OF TEST
Rated power applied until thermally stable, then a minimum
of 15 minutes at - 55 °C
Thermal Shock
(2.0 % + 0.05 Ω) ΔR
5 x rated power (3.75 W and smaller), 10 × rated power
(4 W and larger) for 5 sec.
Short Time Overload
(2.0 % + 0.05 Ω) ΔR
Dielectric Withstanding Voltage
Low Temperature Storage
High Temperature Exposure
Moisture Resistance
1000 Vrms, one minute
- 65 °C for 24 hours
(0.1 % + 0.05 Ω) ΔR
(2.0 % + 0.05 Ω) ΔR
(4.0 % + 0.05 Ω) ΔR
(2.0 % + 0.05 Ω) ΔR
(0.2 % + 0.05 Ω) ΔR
(0.2 % + 0.05 Ω) ΔR
(3.0 % + 0.05 Ω) ΔR
250 hours at + 350 °C
MIL-STD-202 Method 106, 7b not applicable
MIL-STD-202 Method 213, 100 g’s for 6 milliseconds, 10 shocks
Frequency varied 10 to 2000 Hz, 20 g peak, 2 directions 6 hours each
2000 hours at rated power, + 25 °C, 1.5 hours “ON”, 0.5 hours “OFF”
Shock, Specified Pulse
Vibration, High Frequency
Load Life
5 to 10 second 10 pound pull test; torsion test - 3 alternating directions,
360 °C each
Terminal Strength
(1.0 % + 0.05 Ω) ΔR
**** All ΔR figures shown are maximum, based upon testing requirements per MIL-PRF-26 at a maximum operating temperature of + 350 °C.
ΔR maximum figures are considerably lower when tested at a maximum operating temperature of + 250 °C.
Document Number: 30215
Revision: 13-Sep-06
For technical questions, contact: ww2aresistors@vishay.com
www.vishay.com
27
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明