DFNA5002FT1 [VISHAY]
RES ARRAY 4 RES 50K OHM 8VDFN;型号: | DFNA5002FT1 |
厂家: | VISHAY |
描述: | RES ARRAY 4 RES 50K OHM 8VDFN |
文件: | 总3页 (文件大小:103K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DFN
www.vishay.com
Vishay Dale Thin Film
Dual Flat No Lead Molded Precision Thin Film Resistor
Surface Mount Network
FEATURES
• 0.8 mm lead pitch
• MSL level 1 per J-STD-020
• Low profile 1 mm seated height
• Small size 4 mm x 4 mm size 50 % board savings
over SOIC packages
• Wide resistance range 100 to 100 k available
• Custom configurations available
• Low TCR 25 ppm, TCR tracking to 3 ppm
• Ratio tolerances to 0.025 %
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
The DFN series of precision surface mount resistor networks
feature isolated thin film precision resistors mounted in a
0.8 mm pitch 4 mm x 4 mm dual flat no lead package. The
networks feature 50 % savings in board space over
traditional SOIC packages. They are ideally suited for
applications of unity gain operational amplifiers that require
close TC tracking and tight ratio tolerances over
temperature. Custom configurations are available upon
request.
TYPICAL PERFORMANCE
ABSOLUTE
25
TRACKING
3
TCR
TOL.
ABSOLUTE
0.1
RATIO
0.05
SCHEMATIC
STANDARD RESISTANCE OFFERING (R1 =)
8
7
6
5
500
10 k
20 k
50 k
100 k
1 k
2 k
R1
R1
R1
R1
4.99 k
5 k
Note
Consult factory for additional R values and schematics
1
2
3
4
•
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
Passivated nichrome
8
CONDITIONS
Material
-
Pin/Lead Number
Resistance Range
TCR: Absolute
-
100 to 100 k per resistor
25 ppm/ꢀC
-
-55 ꢀC to +125 ꢀC
TCR: Tracking
3 ppm/ꢀC
-55 ꢀC to +125 ꢀC
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
Stability: Absolute
Stability: Ratio
0.05 % to 1.0 %
0.025 % to 0.5 %
100 mW
+25 ꢀC
+25 ꢀC
Maximum at +70 ꢀC
100 mW x number of resistors
R 0.05 %
Maximum at +70 ꢀC
2000 h at +70 ꢀC
R 0.015 %
2000 h at +70 ꢀC
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
< 0.1 ppm/V
-
100 V max. not to exceed P x R
-55 ꢀC to +125 ꢀC
-55 ꢀC to +150 ꢀC
< -30 dB
-
-
-
-
Thermal EMF
< 0.08 μV/ꢀC
-
Shelf Life Stability: Absolute
Shelf Life Stability: Ratio
R 0.01 %
R 0.002 %
1 year at +25 ꢀC
1 year at +25 ꢀC
Revision: 28-May-15
Document Number: 60109
1
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DFN
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in millimeters
3.500 0.050
Exposed Pad
4.000 0.050
8
5
0.300 0.050
0.800 BSC
Resistance
Value Code
5
6
7
8
DFNA
XXXX
MMYY
2.700 0.050
Exposed Pad
4.000 0.050
4
3
2
1
Date
Code
(MMYY)
Pin 1 Indentification
Chamfer 0.300 x 45°
2.400
Ref.
1
4
Pin 1 Dot
by Marking
0.400 0.050
(4 mm x 4 mm)
BOTTOM VIEW
TOP VIEW
A
Max. 0.900
Nom. 0.850
A
0.000 - 0.050
0.203 Ref.
Min.
0.800
SIDE VIEW
Note
• Contact factory for package outlines for higher pin count or custom configurations
MECHANICAL SPECIFICATIONS
Resistive Element
Substrate Material
Body
Passivated nichrome
Ceramic
Molded epoxy
Copper alloy
Terminals
Plating
100 % matte tin
Per MIL-PRF-914
Marking Resistance to Solvents
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: DFNA1002AT1
D
F
N
A
1
0
0
2
A
T
1
GLOBAL
MODEL
TOLERANCE AND
RATIO TOLERANCE
SCHEMATIC
RESISTANCE
PACKAGING
DFN
(Lead (Pb)-free)
(e3)
A = Isolated equal
The first 3 digits are
significant figures and
the last digit specifies
the number of zeros
to follow.
Z = 0.05 % abs. 0.025 ratio (1)
A = 0.1 % abs. 0.05 % ratio
B = 0.1 % abs. 0.1 % ratio
C = 0.25 % abs. 0.1 % ratio
D = 0.5 % abs. 0.1 % ratio
F = 1.0 % abs. 0.5 % ratio
TAPE AND REEL
value resistors
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (2)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel
Example:
TS = 100 min., 1 mult
1002 = 10 k
1003 = 100 k
4991 = 4.99 k
UF = TUBED
Notes
(1)
(2)
Tolerance available on 1 k and up
Preferred packaging code
Revision: 28-May-15
Document Number: 60109
2
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明