EB453R50SGFXS15 [VISHAY]
CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,100 CONTACTS,0.1 PITCH,R ANGLE PC TAIL TERMINAL,HOLE .125-.137;
| 型号： | EB453R50SGFXS15 |
| 厂家： | 
VISHAY |
| 描述： | CONNECTOR, EDGE CONNECTOR,PCB MNT,RECEPT,100 CONTACTS,0.1 PITCH,R ANGLE PC TAIL TERMINAL,HOLE .125-.137 PC |
| 文件： | 总3页 (文件大小：130K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
EB4
Vishay Dale
Edgeboard Connectors, Dual Readout, 0.100" [2.54mm] C-C,
Standard and Right Angle Terminals
FEATURES
• Grid Patterns: 0.100" C-C x 0.150" [2.54mm x 3.81mm]
and 0.100" C-C x 0.200" [2.54mm x 5.08mm].
• Standard and right angle terminals.
• Greater design latitude:
4 body materials: Diallyl phthalate, phenolic, glass-filled
polyester and glass-filled polyphenylene sulfied.
7 contact termination styles - 3 Standard, 4 Right Angle.
20 body sizes and 6 mounting styles.
• Selective gold plating.
• Accepts PC board thickness of 0.054" to 0.071" [1.37mm
to 1.80mm].
• Polarization between contact positions in all sizes.
Between contact polarization permits polarizing without loss
of contact position.
ELECTRICAL SPECIFICATIONS
Current Rating: 3 amps.
Test Voltage Between Contacts:
At sea level: 650VRMS.
At 70,000 feet [21,336 meters]: 275VRMS.
• Recognized under the Component Program of
Underwriters Laboratories, Inc. Listed under File
E65524, Project 77CH3889.
Insulation Resistance: 5000 Megohm minimum at 500VDC
potential.
APPLICATIONS
For use with 0.0625" [1.59mm] printed circuit boards requiring
an edgeboard type connector on 0.100" [2.54mm] centers.
Contact Resistance: 30 millivolts maximum at rated current
(with gold plating).
MATERIAL SPECIFICATIONS
Operating Temperature: - 65°C to + 125°C.
Humidity: 96 hours at 90% relative humidity at + 40°C, dried
at room temperature for 3 hours minimum, insulation
resistance was greater than 5000 Megohm.
Body Material:
“1” glass-filled diallyl phthalate per MIL-M-14, Type SDG-F
green, flame retardant (UL 94V-0).
Durability: After 500 cycles of insertion and withdrawal of a
0.070" [1.78mm] thick steel test board, contact resistance
less than 0.030V at 3 amps on gold plated contacts and
individual contact pair separation force when measured with
a 0.054" [1.37mm] thick steel test blade was greater than
1/2 ounce.
“2” glass-filled phenolic per MIL-M-14, Type MFH dark
green, flame retardant (UL 94V-0).
“3” thermoplastic polyester, glass-filled, black, flame
retardant (UL 94V-0).
“5” thermoplastic polyphenylene sulfied, glass filled, brown,
flame retardant (UL 94V-0).
Shock: Three 50g shocks in each of 3 mutually
perpendicular planes with no loss of continuity.
Contacts: Phosphor bronze. (See Ordering Information.)
Vibration: 2 hours in each of 3 mutually perpendicular
planes, frequency sweep 10 to 55cps at 0.06 double
amplitude with no loss of continuity.
Polarizing Key: Glass reinforced nylon, flame retardant
(UL 94H-B).
Plating: Gold. (Ordering Information.)
ORDERING INFORMATION
EB4
3
K
20
SG
X
15
MODEL
BODY MATERIAL STANDARD
TERMINAL
CONTACTS
CONTACT PLATING
MOUNTING
VARIATIONS
POLARIZING
KEY POSITIONS
VARIATIONS
C, D, K,
1R, 2R,
3R, 4R
6, 10, 12,
1 = Diallyl
Phthalate
2 = Phenolic
3 = Glass-filled
Polyester
5 = Glass-filled
Polyphenylene
Sulfied
Key(s) are located to
right of position(s)
designated. Use odd-
numbered contact for
ordering: -1, -3, -5, etc.
Required only when
polarizing keys are to
be factory installed.
NOTE: To order
SG = Selective Gold Plating
15, 18, 20,
22, 25, 28,
30, 31, 35,
36, 40, 43,
44, 48, 49,
50, 60 and
65 per side.
(0.00003" [0.000762mm] minimum
thick) on contact area with Gold
Flash on terminal.
SGF = Selective Gold Plating
(0.000010" [0.000254mm]
minimum thick) on contact area
with Gold Flash on terminal.
All Gold Plating over 0.00005"
[0.00127mm] minimum Nickel
Underplate.
polarizing keys
individually, specify
Model PK-4.
Contact factory for additional
plating options.
For technical questions, contact Connectors@vishay.com
www.vishay.com
2
Document Number 36001
Revision 14-Aug-02
EB4
Edgeboard Connectors, Dual Readout, 0.100" [2.54mm] C-C,
Standard and Right Angle Terminals
Vishay Dale
DIMENSIONS in inches [millimeters]
0.060
[1.52]
R Typ.
0.342
[8.69]
Typ.
0.050
[1.27]
Typ.
0.287
[7.29]
A
B
C
0.100
[2.54]
Typ.
D
E
J
J
0.060
[1.52]
Typ.
See table for
contact and
mounting variations
0.365
[9.27]
Section J-J
0.250
[6.35]
Typ.
0.054 - 0.071 [1.37 - 1.80]
Card Thickness
0.180
[4.57]
Typ.
0.430
[10.92]
Typ.
0.125
[3.17]
0.300 [7.62]
Point of
Contact
Depth of
Insertion
0.610 [15.49]
Typ.
0.150 [3.81]
Polarizing Key:
When ordering polarizing
keys individually, specify
by the Model Number:
PK-4 between contacts.
Hand insertion tool, TPK-4,
provided upon request.
0.295
[7.49]
0.031
[0.787]
0.200
[5.08]
0.096 ± 0.002 [2.44 ± .051]
# OF CONTACT
POSITIONS
PER SIDE
A
B
C
D
E
6
1.435 [36.45]
1.835 [46.61]
2.035 [51.69]
2.335 [59.31]
2.635 [66.93]
2.835 [72.01]
3.035 [77.09]
3.335 [84.71]
3.635 [92.33]
3.835 [97.41]
3.935 [99.95]
4.335 [110.11]
4.435 [112.65]
4.835 [122.81]
5.135 [130.43]
5.235 [132.97]
5.635 [143.13]
5.735 [145.67]
5.835 [148.21]
6.835 [173.61]
7.335 [186.31]
1.175 [29.85]
1.575 [40.00]
1.775 [45.08]
2.075 [52.70]
2.375 [60.32]
2.575 [65.40]
2.775 [70.48]
3.075 [78.10]
3.375 [85.72]
3.575 [90.80]
3.675 [93.34]
4.075 [103.50]
4.175 [106.04]
4.575 [116.20]
4.875 [123.82]
4.975 [126.36]
5.375 [136.52]
5.475 [139.06]
5.575 [141.60]
6.575 [167.00]
7.075 [179.70]
0.700 [17.78]
1.100 [27.94]
1.300 [33.02]
1.600[40.64]
1.900 [48.26]
2.100 [53.34]
2.300 [58.42]
2.600 [66.04]
2.900 [73.66]
3.100 [78.74]
3.200 [81.28]
3.600 [91.44]
3.700 [93.98]
4.100 [104.14]
4.400 [111.76]
4.500 [114.30]
4.900 [124.46]
5.000 [127.00]
5.100 [129.54]
6.100 [154.94]
6.600 [167.64]
0.860 [21.84]
1.260 [32.00]
1.460 [37.08]
1.760 [44.70]
2.060 [52.32]
2.260 [57.40]
2.460 [62.48]
2.760 [70.10]
3.060 [77.72]
3.260 [82.80]
3.360 [85.34]
3.760 [95.50]
3.860 [98.04]
4.260 [108.20]
4.560 [115.82]
4.660 [118.36]
5.060 [128.52]
5.160 [131.06]
5.260 [133.60]
6.260 [159.00]
6.760 [171.70]
0.750 [19.05]
1.150 [29.21]
1.350 [34.29]
1.650 [41.91]
1.950 [49.53]
2.150 [54.61]
2.350 [59.69]
2.650 [67.31]
2.950 [74.93]
3.150 [80.01]
3.250 [82.55]
3.650 [92.71]
3.750 [95.25]
4.150 [105.41]
4.450 [113.03]
4.550 [115.57]
4.950 [125.73]
5.050 [128.27]
5.150 [130.81]
6.150 [156.21]
6.650 [168.91]
10
12
15
18
20
22
25
28
30
31
35
36
40
43
44
48
49
50
60
65
For technical questions, contact Connectors@vishay.com
Document Number 36001
Revision 14-Aug-02
www.vishay.com
3
EB4
Edgeboard Connectors, Dual Readout, 0.100" [2.54mm] C-C,
Standard and Right Angle Terminals
Vishay Dale
PHYSICAL SPECIFICATIONS
Contact Type: Bifurcated Cantilever Beam.
Number of Contacts: 10, 12, 15, 18, 20, 22, 25, 28, 30, 31,
35, 36, 40, 43, 44, 48, 49, 50, 60 and 65 per side.
Type “3R” - Dip Solder, 0.025" [0.635mm] square terminals,
0.180" [4.57mm] nominal terminal length x 0.150" [3.81mm]
nominal terminal row spacing.
Type “4R” - Dip Solder, 0.025" [0.635mm] square terminals,
0.180" [4.57mm] nominal terminal length x 0.200" [5.08mm]
nominal terminal row spacing.
Contact Terminal Variation: Standard terminals.
Type “C” - Dip Solder, 0.025" [0.635mm] square terminals,
0.175" [4.44mm] nominal terminal length below standoffs.
Contact Spacing: 0.100" [2.54mm] center to center.
Type “D” - Dip Solder, 0.025" [0.635mm] square terminals,
0.115" [2.92mm] nominal terminal length below standoffs.
Contact Terminal Row Spacing:
Standard - 0.200" [5.08mm] nominal.
Right Angle - 0.200" [5.08mm] nominal and 0.150" [3.81mm]
nominal.
Card Thickness: 0.054" to 0.071" [1.37mm to 1.80mm].
Card Slot Depth: 0.300" [7.62mm].
Type “K” - Wire Wrap™, 0.025" [0.635mm] square terminals,
0.570" [14.48mm] nominal terminal length below standoffs.
Contact Terminal Variation: Right angle terminals.
Type “1R” - Dip Solder, 0.025" [0.635mm] square terminals,
0.120" [3.05mm] nominal terminal length x 0.150" [3.81mm]
nominal terminal row spacing.
Connector Polarization: Between contact polarization key(s)
are located to the right of the contact position(s) designated.
NOTE: High temperature burn-in, edgeboard connectors, with
0.100" [2.54mm] center to center are on page 20 of this catalog.
Type “2R” - Dip Solder, 0.025" [0.635mm] square terminals,
0.120" [3.05mm] nominal terminal length x 0.200" [5.08mm]
nominal terminal row spacing.
MOUNTING VARIATIONS in inches [millimeters]
Type “XFS”
Right Angle
Type “X”
Type “XF”
Type “XS”
Right Angle
Clearance Hole
Clearance Hole
Mounting Flange
Raised Mounting Flange
Flush Mounting Flange
Mounting Flange
.060 [1.52] Ref.
.060 [1.52] Ref.
.060 [1.52] Ref.
.060 [1.52] Ref.
Ø .125
[3.17]
.125
[3.17]
Dia.
.125
[3.17]
Dia.
.125
[3.17]
Dia.
.125
[3.17]
.125 [3.17]
.250 [6.35]
.250
[6.35]
.250
[6.35]
.430
[10.92]
.250
[6.35]
.430
[10.92]
.610
[15.49]
Ref.
.610
[15.49]
Ref.
.610
[15.49]
Ref.
.610 [15.49]
Ref.
Type “YF”
Type “Y”
Type “W”
Threaded Insert
Threaded Insert
No Mounting Flange
Flush Mounting Flange
Raised Mounting Flange
0.060 [1.52] Ref.
.060 [1.52] Ref.
0.060 [1.52] Ref.
0.180 [4.57]
4-40
UNC-2B
0.430
[10.92]
4-40
UNC-2B
0.250
[6.35]
0.250
[6.35]
0.610
[15.49]
Ref.
0.430
[10.92]
0.610
[15.49]
Ref.
0.610 [15.49]
Ref.
TERMINAL VARIATIONS in inches [millimeters]
Type “C” and “D”
Solder Dip, Standard
0.025 [0.635] Square Terminals
Type “K”
Wire Wrap™, Standard
0.025 [0.635] Square Terminals
Type “1R”, “2R”, “3R” and “4R”
Right Angle
0.025 [0.635] Square Terminals
TYPE
A
B
1R
0.150 0.120 ± 0.030
[3.81] [3.05 ± 0.762]
B
0.200
[5.08]
0.200 [5.08]
2R
3R
4R
0.200 0.120 ± 0.030
[5.08]
[3.05 ± .762]
To Fit
0.590
[14.99]
0.050 ± 0.002
[1.27 ± 0.051]
Dia. Eyelet
0.150 0.180 ± 0.030
[3.81] [4.57 ± 0.762]
A
0.570
[14.48]
“C” = 0.175 [4.44]
“D” = 0.115 [2.92]
0.200 0.180 ± 0.030
[5.08] [4.57 ± 0.762]
For technical questions, contact Connectors@vishay.com
www.vishay.com
4
Document Number 36001
Revision 14-Aug-02
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明