EB63K49SG [VISHAY]

Card Edge Connector, 98 Contact(s), 2 Row(s), Straight, 0.125 inch Pitch, Wire Wrap Terminal, Locking, Black Insulator;


型号：	EB63K49SG
厂家：	VISHAY
描述：	Card Edge Connector, 98 Contact(s), 2 Row(s), Straight, 0.125 inch Pitch, Wire Wrap Terminal, Locking, Black Insulator 连接器
文件：	总4页 (文件大小：183K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

EB6

Vishay Dale

Edgeboard Connectors, Dual Readout, 0.125" (3.17 mm) C-C,

Standard and Right Angle Terminals

FEATURES

• Grid Patterns: 0.125" C-C x 0.150" (3.17 mm x 3.81 mm),

0.125" C-C x 0.200" (3.17 mm x 5.08 mm) and

0.125" C-C x 0.250" (3.17 mm x 6.35 mm)

• Standard and right angle terminals

• Greater design latitude:

4 body materials: Diallyl phthalate, phenolic, glass-filled

polyester and glass-filled polyphenylene sulfied

7 contact termination styles - 3 standard, 4 right angle

19 body sizes and 6 mounting styles

• Selective gold plating

• Accepts PC board thickness of 0.054" to 0.071" (1.37 mm

to 1.80 mm)

• Polarization between contact positions in all sizes.

Between contact polarization permits polarizing without

loss of contact position.

ELECTRICAL SPECIFICATIONS

• Recognized under the Component Program of

Underwriters Laboratories, Inc. listed under file

E65524, project 77CH3889

Current Rating: 3 A

Test Voltage Between Contacts:

At sea level: 1500 V_RMS

At 70 000 feet (21 336 meters): 325 V_RMS

APPLICATIONS

For use with 0.0625" (1.59 mm) printed circuit boards

requiring an edgeboard type connector on 0.125" (3.17 mm)

centers

Insulation Resistance: 5000 MΩ minimum at 500 V_DC

potential

Contact Resistance: 30 mV maximum at rated current (with

gold plating)

MATERIAL SPECIFICATIONS

Operating Temperature: - 65 °C to + 125 °C

Body Material:

Humidity: 96 h at 90 % relative humidity at + 40 °C, dried at

room temperature for 3 h minimum, insulation resistance

was greater than 5000 MΩ

“1” glass-filled diallyl phthalate per MIL-M-14, Type SDG-F

green, flame retardant (UL 94 V-0)

“2” glass-filled phenolic per MIL-M-14, Type MFH dark

green, flame retardant (UL 94 V-0)

“3” thermoplastic polyester, glass-filled, black, flame

retardant (UL 94 V-0)

”5” thermoplastic polyphenylene sulfied, glass filled, brown,

flame retardant (UL 94 V-0)

Durability: After 500 cycles of insertion and withdrawal of a

0.070" (1.78 mm) thick steel test board, contact resistance

less than 0.030 V at 3 A on gold plated contacts and

individual contact pair separation force when measured with

a 0.054" (1.37 mm) thick steel test blade was greater than

½ oz.

Shock: Three 50G shocks in each of

3 mutually

Contacts: Phosphor bronze (See Ordering Information)

Polarizing Key: Glass reinforced nylon, flame retardant

(UL 94H-B)

perpendicular planes with no loss of continuity

Vibration: 2 h in each of 3 mutually perpendicular planes,

frequency sweep 10 cps to 55 cps at 0.06 double amplitude

with no loss of continuity

Plating: Gold (See Ordering Information)

ORDERING INFORMATION

EB6

MODEL

BODY

MATERIAL

STANDARD CONTACTS

CONTACT PLATING

MOUNTING

VARIATIONS

POLARIZING

KEY POSITIONS

TERMINAL

PER SIDE

VARIATIONS

SG = Selective gold plating (0.00003"

1 = Diallyl

Phthalate

2 = Phenolic

3 = Glass-filled

Polyester

5 = Glass-filled

Polyphenylene

Sulfied

6, 10, 12, (0.000762 mm) minimum thick) on contact

Key(s) are located to

right of position(s)

C, D, K,

1R, 2R,

3R, 4R

14, 15, 18,

22, 24, 25,

area with gold flash on terminal.

SGF = Selective gold plating (0.000010"

designated. Use odd-

numbered contact for

ordering: -1, -3, -5, etc.

Required only when

polarizing keys are to be

factory installed.

Note: To order polarizing

keys individually, specify

Model PK-6.

28, 30, 31, (0.000254 mm) minimum thick) on contact

32, 35, 36,

40, 43, 44,

area with gold flash on terminal.

All gold plating over 0.00005"

49, and 50 (0.00127 mm) minimum nickel underplate.

Contact factory for additional plating

options.

Document Number: 36002

Revision: 16-Feb-09

For technical questions, contact: connectors@vishay.com

www.vishay.com

EB6

Edgeboard Connectors, Dual Readout, 0.125" (3.17 mm) C-C,

Standard and Right Angle Terminals

Vishay Dale

DIMENSIONS in inches (millimeters)

0.060

(1.52)

R Typ.

0.060

(1.52)

Typ.

0.340

(8.64)

Typ.

0.260

(6.60)

0.125

(3.17)

Typ.

0.060

(1.52)

Typ.

0.365

(9.27)

0.250

(6.35)

Typ.

Section J - J

0.180

(4.57)

Typ.

0.054 - 0.071 (1.37 - 1.80)

Card Thickness

0.430

(10.92)

Typ.

0.125 (3.17)

Point of

Contact

0.610 (15.49)

0.300 (7.62)

Depth of

Insertion

Typ.

0.150 (3.81)

Polarizing Key:

When ordering polarizing keys individually,

specify by the Model Number:

0.295

(7.49)

PK-6 between contacts. Hand insertion tool,

TPK-6, provided upon request.

0.031

(0.787)

0.250

(6.35)

0.096 0.002

(2.44 0.050)

# OF CONTACT

POSITIONS

PER SIDE

1.555 (39.50)

2.055 (52.20)

2.305 (58.55)

2.555 (64.90)

2.680 (68.07)

3.055 (77.60)

3.555 (90.30)

3.805 (96.65)

3.930 (99.82)

4.305 (109.35)

4.555 (115.70)

4.680 (118.87)

4.805 (122.05)

5.180 (131.57)

5.305 (134.75)

5.805 (147.45)

6.180 (156.97)

6.305 (160.15)

6.930 (176.02)

7.055 (179.20)

1.295 (32.89)

1.795 (45.59)

2.045 (51.94)

2.295 (58.29)

2.420 (61.47)

2.795 (70.99)

3.295 (83.69)

3.545 (90.04)

3.670 (93.22)

4.045 (102.74)

4.295 (109.09)

4.420 (112.27)

4.545 (115.44)

4.920 (124.97)

5.045 (128.14)

5.545 (140.84)

5.920 (150.37)

6.045 (153.54)

6.670 (169.42)

6.795 (172.59)

0.875 (22.22)

1.375 (34.92)

1.625 (41.28)

1.875 (47.62)

2.000 (50.80)

2.375 (60.32)

2.875 (73.02)

3.125 (79.38)

3.250 (82.55)

3.625 (92.08)

3.875 (98.42)

4.000 (101.60)

4.125 (104.78)

4.500 (114.30)

4.625 (117.48)

5.125 (130.18)

5.500 (139.70)

5.625 (142.88)

6.250 (158.75)

6.375 (161.92)

1.035 (26.29)

1.535 (38.99)

1.785 (45.34)

2.035 (51.69)

2.160 (54.86)

2.535 (64.39)

3.035 (77.09)

3.285 (83.44)

3.410 (86.61)

3.785 (96.14)

4.035 (102.49)

4.160 (105.66)

4.285 (108.84)

4.660 (118.36)

4.785 (121.54)

5.285 (134.24)

5.660 (143.76)

5.785 (146.94)

6.410 (162.81)

6.535 (165.99)

0.875 (22.22)

1.375 (34.92)

1.625 (41.28)

1.875 (47.62)

2.000 (50.80)

2.375 (60.32)

2.875 (73.02)

3.125 (79.38)

3.250 (82.55)

3.625 (92.08)

3.875 (98.42)

4.000 (101.60)

4.125 (104.78)

4.500 (114.30)

4.625 (117.48)

5.125 (130.18)

5.500 (139.70)

5.625 (142.88)

6.250 (158.75)

6.375 (161.92)

www.vishay.com

For technical questions, contact: connectors@vishay.com

Document Number: 36002

Revision: 16-Feb-09

EB6

Edgeboard Connectors, Dual Readout, 0.125" (3.17 mm) C-C,

Standard and Right Angle Terminals

Vishay Dale

PHYSICAL SPECIFICATIONS

Contact Type: Bifurcated cantilever beam

Type “3R” - dip solder, 0.025" (0.635 mm) square terminals,

0.180" (4.57 mm) nominal terminal length x 0.150" (3.81 mm)

nominal terminal row spacing

Number of Contacts: 6, 10, 12, 14, 15, 18, 22, 24, 25, 28,

30, 31, 32, 35, 36, 40, 43, 44, 49, and 50 per side

Type “4R” - dip solder, 0.025" (0.635 mm) square terminals,

0.180" (4.57 mm) nominal terminal length x 0.200" (5.08 mm)

nominal terminal row spacing

Contact Terminal Variation: Standard terminals

Type “C” - dip solder, 0.025" (0.635 mm) square terminals,

0.175" (4.44 mm) nominal terminal length below standoffs

Contact Spacing: 0.125" (3.17 mm) center to center

Type “D” - dip solder, 0.025" (0.635 mm) square terminals,

0.115" (2.92 mm) nominal terminal length below standoffs

Contact Terminal Row Spacing: Standard - 0.250"

5.08 mm) nominal. Right angle - 0.200" (5.08 mm) nominal

and 0.150" (3.81 mm) nominal

Type “K” - Wire Wrap™, 0.025" (0.635 mm) square

terminals, 0.570" (14.48 mm) nominal terminal length below

standoffs

Card Thickness: 0.054" to 0.071" (1.37 mm to 1.80 mm)

Card Slot Depth: 0.300" (7.62 mm)

Contact Terminal Variation: Right angle terminals

Connector Polarization: Between contact polarization

key(s) are located to the right of the contact position(s)

designated

Type “1R” - dip solder, 0.025" (0.635 mm) square terminals,

0.120" (3.05 mm) nominal terminal length x 0.150" (3.81 mm)

nominal terminal row spacing

Note

•

Type “2R” - dip solder, 0.025" (0.635 mm) square terminals,

0.120" (3.05 mm) nominal terminal length x 0.200" (5.08 mm)

nominal terminal row spacing

High temperature burn-in, edgeboard connectors, with 0.125"

(3.17 mm) center to center are on www.vishay.com/doc?36006

MOUNTING VARIATIONS in inches (millimeters)

Type “X”

Type “XF”

Type “XS”

Right Angle

Mounting Flange

Type “XFS”

Right Angle

Mounting Flange

Clearance Hole

Raised Mounting Flange

Flush Mounting Flange

0.060 (1.52) Ref.

0.125

(3.17)

Dia.

0.125

(3.17)

Dia.

0.125

(3.17)

Dia.

0.125

(3.17)

0.430

0.125

(3.17)

Dia.

0.250

(6.35)

0.125 (3.17)

0.250 (6.35)

0.250

(6.35)

0.250

(6.35)

0.430

(10.92)

0.610

(15.49) Ref.

(10.92)

0.610

(15.49) Ref.

0.610

(15.49) Ref.

0.610

(15.49) Ref.

Type “Y”

Type “YF”

Type “W”

No Mounting Flange

Threaded Insert

Raised Mounting Flange

Flush Mounting Flange

0.060 (1.52) Ref.

0.205 (5.21)

4-40

0.430

(10.92)

UNC-2B

4-40

UNC-2B

0.610

(15.49)

Ref.

0.250

(6.35)

0.250

(6.35)

0.430

(10.92)

0.610

(15.49)

Ref.

0.610

(15.49) Ref.

TERMINAL VARIATIONS in inches (millimeters)

TYPE

Type “C” and “D”

Solder Dip, Standard

Type “K”

Type “1R”, “2R”, “3R” and “4R”

Wire Wrap™, Standard

0.025 (0.635) Square Terminals

Right Angle

0.150 0.120 0.030

(3.81) (3.05 0.762)

0.025 (0.635) Square Terminals

0.250

(6.35)

0.250 (6.35)

0.200 0.120 0.030

(5.08) (3.05 0.762)

0.590

(14.99)

To Fit

0.050 0.002

(1.27 0.051)

0.150 0.180 0.030

(3.81) (4.57 0.762)

Dia. Eyelet

“C” = 0.175 (4.44)

“D” = 0.115 (2.92)

0.200 0.180 0.030

(5.08) (4.57 0.762)

0.570 (14.48)

Document Number: 36002

Revision: 16-Feb-09

For technical questions, contact: connectors@vishay.com

www.vishay.com

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.

Revision: 02-Oct-12

Document Number: 91000

EB63K49SG [VISHAY]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E