EB73DC22SGW [VISHAY]

CONNECTOR, 44 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SOLDER;


型号：	EB73DC22SGW
厂家：	VISHAY
描述：	CONNECTOR, 44 CONTACT(S), FEMALE, STRAIGHT SINGLE PART CARD EDGE CONN, SOLDER 连接器
文件：	总4页 (文件大小：132K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

EB7D

Vishay Dale

Edgeboard Connectors, Dual Readout

FEATURES

• 0.156" C-C x 0.140" grid (3.96 mm x 3.56 mm)

• Bifurcated bellows contacts provide 2 flexing contact

surfaces to assure positive contact under adverse

conditions such as vibration or PC board irregularities

• Accepts PC board thickness of 0.054" to 0.071" (1.37 mm

to 1.80 mm)

• Polarization between contact positions in all sizes.

Between contact polarization permits polarizing without

loss of contact position

ELECTRICAL SPECIFICATIONS

Current Rating: 5 A

Test Voltage Between Contacts:

At sea level: 1800 V_RMS

At 70 000 feet (21 336 meters): 450 V_RMS

• Selective gold plating

• Polarizing key is reinforced nylon, may be inserted by

hand, requires no adhesive.

Insulation Resistance: 5000 MΩ minimum at 500 V_DC

potential

• Protected entry, provided by recessed leading edge of

contact, permits the card slot to straighten and align the

board before electrical contact is made. Prevents damage

to contact which might be caused by warped or out of

tolerance boards

• Recognized under the Component Program of

Underwriters Laboratories, Inc. listed under file

E65524, project 77CH3889

Contact Resistance: 30 mV maximum at rated current (with

gold plating)

Operating Temperature: - 55 °C to + 125 °C

Humidity: 96 h at 90 % relative humidity at + 40 °C, dried at

room temperature for 3 h minimum, insulation resistance

was greater than 5000 MΩ

Durability: After 500 cycles of insertion and withdrawal of a

0.070" (1.78 mm) thick steel test gauge, contact resistance

less than 0.030 V at 5 A and individual contact retention force

when measured with 0.054" (1.37 mm) thick steel test slug

greater than ½ oz.

APPLICATIONS

For use with 0.062" (1.57 mm) printed circuit boards requiring

an edgeboard type connector on 0.156" (3.96 mm) centers

Shock: Three 50G shocks in each of

perpendicular planes with no loss of continuity

3 mutually

MATERIAL SPECIFICATIONS

Vibration: 2 h in each of 3 mutually perpendicular planes,

frequency sweep 10 cps to 55 cps at 0.06 double amplitude

with no loss of continuity

Body: (Standard) glass-filled phenolic per MIL-M-14, dark

green, flame retardant (UL 94 V-0). (Optional - see Ordering

Information)

“1” glass-filled diallyl phtalate per MIL-M-14, type SDG-F

green, flame retardant (UL 94 V-0)

“3” thermoplastic polyester, glass-filled, black, flame

retardant (UL 94 V-0)

”5” thermoplastic polyphenylene sulfied, glass filled, brown,

flame retardant (UL 94 V-0)

Contacts: Phosphor bronze

Polarizing Key: Glass reinforced nylon, flame retardant

(UL 94H-B)

Contact Plating: Gold (See Ordering Information)

PHYSICAL SPECIFICATIONS

Contact Type: Bifurcated bellows

Number of Contacts: 6, 10, 12, 15, 18, 22, 36, 43 per side

Contact Spacing: 0.156" (3.96 mm) center to center

Card Thickness: 0.054" to 0.071" (1.37 mm to 1.80 mm)

Card Slot Depth: Dual readout = 0.260" (6.60 mm)

Note

•

High temperature burn-in, edgeboard connectors, 0.156"

(3.96 mm) center to center are on www.vishay.com/doc?36006

ORDERING INFORMATION

EB7

MODEL

BODY

DUAL

OPTIONAL STANDARD CONTACTS

CONTACT PLATING

MOUNTING

VARIATIONS

POLARIZING

KEY POSITIONS

MATERIAL

READOUT CONTACTS TERMINAL PER SIDE

VARIATIONS

SG = Selective gold plating

(0.00003" (0.000762 mm)

Beryllium

Copper

copntacts

optional

6, 10, 12,

Optional body

material

Key(s) are located

to right of position(s)

designated.

A, E, C,

or K

15, 18, 22, minimum thick) on contact

36, or 43

area with gold flash on

terminal

SGF = Selective gold plating

(0.000010" (0.000254 mm)

minimum thick) on contact

area with gold flash on

terminal.

All gold plating over

0.00005" (0.00127 mm)

minimum nickel underplate.

Contactfactoryforadditional

plating options.

1 = Diallyl

Phthalate

Required only when

polarizing keys are

to be factory

Available in

“A” and “E”

contact

styles only

(Omit for

standard)

3 = Glass-filled

Polyester

5 = Glass-filled

Polyphenylene

Sulfied

= Omit number

for standard

pheniolic

installed

www.vishay.com

For technical questions, contact: connectors@vishay.com

Document Number: 36003

Revision: 16-Feb-09

EB7D

Edgeboard Connectors, Dual Readout

Vishay Dale

DIMENSIONS in inches (millimeters)

0.030 (0.762ꢀ

0.062 0.010

(1.57 0.254ꢀ

R Typ.

0.156 0.005

(3.96 0.127ꢀ

Non-Cumulative

See Table

for Mounting

Variations

See Table

for Terminal

Variations

0.250

(6.35ꢀ

0.440

(11.18ꢀ

0.010 ( 0.254ꢀ

Section C to C:

Polarizing Key:

Type “A”

Types “C” and “K”

0.028

(0.711ꢀ

0.054 to 0.071

(1.37 to 1.80ꢀ

0.054 to 0.071

(1.37 to 1.80ꢀ

0.230

(5.84ꢀ

0.260 (6.60ꢀ

Depth of Card

Insertion

0.260 (6.60ꢀ

Depth of Card

Insertion

0.245

(6.22ꢀ

When ordering polarizing keys individually,

specify by the Model Number:

PK-7 between contacts. Hand insertion tool,

TPK-7, provided upon request.

0.250

(6.35ꢀ

0.140 (3.56ꢀ

# OF CONTACT

POSITIONS

PER SIDE

1.78 (45.21)

2.41 (61.21)

2.72 (69.09)

3.19 (81.03)

3.66 (92.96)

4.28 (108.71)

6.53 (165.86)

7.62 (193.55)

1.53 (38.86)

2.16 (54.86)

2.47 (62.74)

2.94 (74.68)

3.41 (86.61)

4.03 (102.36)

6.22 (157.99)

7.30 (185.42)

1.22 (30.99)

1.84 (46.74)

2.16 (54.86)

2.62 (66.55)

3.09 (78.49)

1.10 (27.94)

1.72 (43.69)

2.04 (51.82)

2.50 (63.50)

2.97 (75.44)

3.60 (91.44)

5.78 (146.81)

6.80 (172.72)

0.328 (8.33)

0.438 (11.13)

0.500 (12.70)

3.72 (94.49)

5.91 (150.11)

7.00 (177.80)

Document Number: 36003

Revision: 16-Feb-09

For technical questions, contact: connectors@vishay.com

www.vishay.com

EB7D

Edgeboard Connectors, Dual Readout

Vishay Dale

MOUNTING VARIATIONS in inches (millimeters)

Type “V”

Type “VI”

Type “W”

Type “X”

Clearance Hole

No Mounting Pad

No Mounting Flange

Clearance Hole

0.250

(6.35ꢀ

Ref.

0.250

(6.35ꢀ

Ref.

(6.35ꢀ

Ref.

0.142

(3.61ꢀ

Dia.

0.220

(5.59ꢀ

Ref.

0.010 (0.254ꢀ

0.000 (0.000ꢀ

0.142 (3.61ꢀ Dia.

0.128 (3.25ꢀ Dia.

Type “XI”

Clearance Hole

Type “Y”

Threaded Insert

Type “Z”

Floating Bushing Radial Float 0.047 (1.19ꢀ

No Mounting Pad

0.250

(6.35ꢀ

Ref.

0.250

(6.35ꢀ

Ref.

0.250

(6.35ꢀ

Ref.

Note: Overall body length

increased by 0.060 (1.52)

0.250

[6.35]

Dia.

0.128

(3.25ꢀ

Dia.

0.116

(2.95ꢀ

Dia.

4-40

UNC-2B

0.220

(5.59ꢀ

Ref.

0.218

(5.54ꢀ

Ref.

0.270 (6.86ꢀ

TERMINAL VARIATIONS in inches (millimeters)

Type “A”

Pierced

Type “C” and “K”

Solder Dip

Type “E”

Card Extender

To fit 3,

To fit 0.051 (1.30ꢀ,

0.200 0.015

(5.08 0.381ꢀ

0.086

#22 AWG

Wires

Min. Through Hole

0.100

(2.54ꢀ

(2.18ꢀ

0.086 x 0.008

(2.18 x 0.203ꢀ

0.050

(1.27ꢀ

0.140 0.015

(3.56 0.381ꢀ

120°

Typ.

15°

Typ.

Uses

Type “A”

Contact

See Table

0.220 0.015

(5.59 0.381ꢀ

TYPE

0.125 0.015 (3.18 0.381)

0.200 0.015 (5.08 0.381)

www.vishay.com

For technical questions, contact: connectors@vishay.com

Document Number: 36003

Revision: 16-Feb-09

Legal Disclaimer Notice

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000

Revision: 11-Mar-11

www.vishay.com

EB73DC22SGW [VISHAY]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E