首页 |元器件品牌

F339X121033MDA2W0 [VISHAY]

Interference Suppression Film Capacitor;
F339X121033MDA2W0
型号： F339X121033MDA2W0
厂家： VISHAY    VISHAY
描述：

Interference Suppression Film Capacitor
文件： 总13页 (文件大小：158K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
F339X1 330VAC  
Vishay BCcomponents  
www.vishay.com  
Interference Suppression Film Capacitor - Class X1  
Radial MKP 330 VAC - Standard Across the Line  
FEATURES  
• 7.5 mm to 27.5 mm lead pitch  
• Small dimensions  
• High voltage capability  
• Material categorization:  
for definitions of compliance please see  
www.vishay.com/doc?99912  
APPLICATIONS  
For standard across the line X1 applications  
See also application note: www.vishay.com/doc?28153  
QUICK REFERENCE DATA  
Capacitance range (E12 series)  
0.001 μF to 2.2 μF (preferred values according to E6)  
20 ꢀ; 10 ꢀ; ( 5 ꢀ on request)  
55/110/56/B  
Capacitance tolerance  
Climatic testing class according to IEC 60068-1  
Rated AC voltage  
330 VAC; 50 Hz to 60 Hz  
800 VDC at 85 °C  
Permissible DC voltage  
Maximum application temperature  
110 °C  
IEC 60384-14 and EN 60384-14  
IEC 60065 requires pass. flamm. class B  
CSA-E384-14; UL 60384-14  
CQC  
Reference standards  
Dielectric  
Polypropylene film  
Metallized  
Electrodes  
Mono construction  
Construction  
Plastic case, epoxy resin sealed, flame retardant  
UL-class 94 V-0  
Encapsulation  
Leads  
Tinned wire  
C-value; tolerance; rated voltage; sub-class; manufacturer’s type;  
code for dielectric material; manufacturer location, year and week;  
manufacturer's logo or name; safety approvals  
Marking  
Note  
•
For more detailed data and test requirements, contact rfi@vishay.com  
DIMENSIONS in millimeters  
l
w
h
lt  
Ø dt  
P
Note  
•
Ø dt 10 ꢀ of standard diameter specified  
Revision: 30-Jun-15  
Document Number: 28185  
1
For technical questions, contact: rfi@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
F339X1 330VAC  
Vishay BCcomponents  
www.vishay.com  
COMPOSITION OF CATALOG NUMBER  
MULTIPLIER (nF)  
CODE  
P1 (mm)  
7.5  
PITCH CODE  
0.1  
1
2
3
4
5
6
7
C
D
F
I
Example:  
10  
10  
310  
410  
510  
10 nF  
100 nF  
1000 nF  
0.01 μF  
0.1 μF  
1.0 μF  
15  
100  
1000  
10 000  
22.5  
27.5  
K
SPECIAL CODE FOR TERMINAL  
2
2 pins  
VOLTAGE  
(#)  
Customized  
33 = 330 VAC  
1 2 3 4  
5 6  
X 1  
7
4
8 9  
1 0  
10 11  
12  
13  
14  
M
15  
2
16  
B
17  
F 3 3 9  
3
3
M
F
0
TOLERANCE  
CLASS  
M
K
J
20 ꢀ  
10 ꢀ  
5 ꢀ  
SPECIAL  
0 = Standard  
TYPE  
Other = Special  
Special  
tolerance  
A
lt (mm)  
3.5 + 1, - 0.5  
3.5 0.3  
LEAD LENGTH CODE  
PITCH (mm)  
PACKING CODE  
PACKING STYLE  
Bulk/loose (1)  
REMARK  
A
7.5 and 10  
B/T  
W
Not for bent back  
Pitch ≤ 22.5 mm  
P
≥ 15  
All  
Tape and reel (H: 18.5 mm; 500 mm)  
5
1
M
25  
2
I
All  
0: Space holder  
Notes  
•
For detailed tape specifications refer to packaging information www.vishay.com/doc?28139  
(1)  
Packaging will be bulk for all capacitors with pitch 15 mm and such with long leads (> 5 mm).  
Capacitors with short leads up to 5 mm and pitch > 15 mm will be in tray and asking code will be “T”.  
Revision: 30-Jun-15  
Document Number: 28185  
2
For technical questions, contact: rfi@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
F339X1 330VAC  
Vishay BCcomponents  
www.vishay.com  
SPECIFIC REFERENCE DATA  
DESCRIPTION  
Rated AC voltage (URAC  
VALUE  
330 V  
)
Permissible DC voltage (URDC  
Tangent of loss angle  
C < 100 nF  
)
800 V  
At 1 kHz  
10 x 10-4  
20 x 10-4  
At 10 kHz  
20 x 10-4  
70 x 10-4  
100 V/μs  
> 15 000 M  
> 5000 s  
470 nF C 2.2 μF  
Rated voltage pulse slope (dU/dt)R at 465 VDC  
R between leads, for C 0.33 μF at 100 V; 1 min  
RC between leads, for C > 0.33 μF at 100 V; 1 min  
R between leads and case; 100 V; 1 min  
Withstanding (DC) voltage (cut off current 10 mA) (1); rise time 1000 V/s:  
C 2.2 μF  
> 30 000 M  
3400 V; 1 min  
2200 V; 1 min  
2160 V; 1 min  
110 °C  
C > 2.2 μF  
Withstanding (AC) voltage between leads and case  
Maximum application temperature  
Note  
(1)  
See “Voltage Proof Test for Metalized Film Capacitors”: www.vishay.com/doc?28169  
ELECTRICAL DATA AND ORDERING INFORMATION  
CATALOG NUMBER F339X1... AND PACKAGING  
LOOSE IN BOX  
TAPED REEL  
SHORT LEADS  
LONG LEADS  
DIMENSIONS  
w x h x l  
(mm)  
URAC CAP.  
MASS  
(g) (3)  
lt = 3.5 mm  
+ 1 mm/- 0.5 mm  
(10 mm)  
or 3.5 mm 0.3 mm  
(15 mm)  
(V)  
(μF)  
Ø = 500 mm (1)(2)  
H = 18.5 mm;  
P0 = 12.7 mm  
lt = 5.0 mm  
1.0 mm  
lt = 25.0 mm  
SPQ  
SPQ  
SPQ  
2.0 mm  
PITCH = 7.5 mm 0.4 mm; dt = 0.50 mm 0.05 mm; C-TOL. = 20 ꢀ  
0.0010  
0.0015 4.0 x 9.0 x 10.0  
0.0022  
21033MCA2B0  
21533MCA2B0  
22233MCA2B0  
23333MCA2B0  
24733MCA2B0  
21033MCM2B0  
21033MCI2B0  
21033MC02W0  
0.4  
21533MCM2B0 1500 21533MCI2B0 1000 21533MC02W0 2500  
22233MCM2B0 22233MCI2B0 22233MC02W0  
0.0033 5.0 x 10.5 x 10.0  
0.0047 6.0 x 11.5 x 10.0  
0.4  
0.8  
23333MCM2B0 1000 23333MCI2B0 1250 23333MC02W0 2000  
24733MCM2B0 750 24733MCI2B0 1000 24733MC02W0 1900  
PITCH = 10.0 mm 0.4 mm; dt = 0.60 mm 0.06 mm; C-TOL. = 20 ꢀ  
0.0010  
0.0015  
0.0022  
21033MDA2B0  
21533MDA2B0  
22233MDA2B0  
23333MDA2B0  
24733MDA2B0  
26833MDA2B0  
31033MDA2B0  
31533MDA2B0  
32233MDA2B0  
33333MDA2B0  
21033MDM2B0  
21533MDM2B0  
22233MDM2B0  
23333MDM2B0  
24733MDM2B0  
26833MDM2B0  
31033MDM2B0  
31533MDM2B0  
21033MDI2B0  
21533MDI2B0  
22233MDI2B0  
23333MDI2B0  
24733MDI2B0  
26833MDI2B0  
31033MDI2B0  
31533MDI2B0  
21033MD02W0  
21533MD02W0  
22233MD02W0  
23333MD02W0  
24733MD02W0  
26833MD02W0  
31033MD02W0  
31533MD02W0  
0.0033  
4.0 x 10.0 x 12.5  
0.0047  
0.6  
1000  
1250  
1400  
0.0068  
0.010  
0.015  
330  
0.022 5.0 x 11.0 x 12.5  
0.033 6.0 x 12.0 x 12.5  
0.82  
1.1  
32233MDM2B0 1000 32233MDI2B0 1000 32233MD02W0 1100  
33333MDM2B0 750 33333MDI2B0 750 33333MD02W0 900  
PITCH = 15.0 mm 0.4 mm; dt = 0.60 mm 0.06 mm; C-TOL. = 20 ꢀ  
0.010  
31033MFP2B0  
31533MFP2B0  
32233MFP2B0  
33333MFP2B0  
34733MFP2B0  
36833MFP2B0  
31033MFM2B0  
31533MFM2B0  
31033MFI2B0  
31533MFI2B0  
31033MF02W0  
31533MF02W0  
0.015  
0.022 5.0 x 11.0 x 17.5  
0.033  
1.0  
32233MFM2B0 1250 32233MFI2B0 1000 32233MF02W0 1100  
33333MFM2B0  
34733MFM2B0  
33333MFI2B0  
34733MFI2B0  
33333MF02W0  
34733MF02W0  
0.047  
0.068 6.0 x 12.0 x 17.5  
1.4  
36833MFM2B0 1000 36833MFI2B0 1000 36833MF02W0  
900  
PITCH = 15.0 mm 0.4 mm; dt = 0.80 mm 0.08 mm; C-TOL. = 20 ꢀ  
0.10  
0.15  
7.0 x 13.5 x 17.5  
8.5 x 15.0 x 17.5  
1.8  
2.4  
3.0  
41033MFP2B0  
41533MFP2B0  
42233MFP2B0  
41033MFM2B0 750 41033MFI2B0 500  
41533MFM2B0 750 41533MFI2B0 500  
42233MFM2B0 500 42233MFI2B0 450  
41033MF02W0  
41533MF02W0  
42233MF02W0  
800  
650  
600  
0.22 10.0 x 16.5 x 17.5  
Revision: 30-Jun-15  
Document Number: 28185  
3
For technical questions, contact: rfi@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
F339X1 330VAC  
Vishay BCcomponents  
www.vishay.com  
ELECTRICAL DATA AND ORDERING INFORMATION  
CATALOG NUMBER F339X1... AND PACKAGING  
LOOSE IN BOX  
TAPED REEL  
SHORT LEADS  
LONG LEADS  
DIMENSIONS  
w x h x l  
(mm)  
URAC CAP.  
MASS  
(g) (3)  
lt = 3.5 mm  
+ 1 mm/- 0.5 mm  
(10 mm)  
or 3.5 mm 0.3 mm  
(15 mm)  
(V)  
(μF)  
Ø = 500 mm (1)(2)  
H = 18.5 mm;  
P0 = 12.7 mm  
lt = 5.0 mm  
lt = 25.0 mm  
SPQ  
SPQ  
SPQ  
1.0 mm  
2.0 mm  
PITCH = 22.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm; C-TOL. = 20 ꢀ  
0.10  
0.15  
0.22  
0.33  
41033MIP2T0  
41533MIP2T0  
42233MIP2T0  
43333MIP2T0  
44733MIP2T0  
46833MIP2T0  
48233MIP2T0  
41033MIM2T0  
41533MIM2T0  
41033MII2B0  
41533MII2B0  
41033MI02W0  
41533MI02W0  
42233MI02W0  
43333MI02W0  
44733MI02W0  
46833MI02W0  
48233MI02W0  
6.0 x 15.5 x 26.0  
2.4  
300  
250  
600  
7.0 x 16.5 x 26.0  
8.5 x 18.0 x 26.0  
2.9  
3.8  
6.8  
7.8  
7.8  
42233MIM2T0 200 42233MII2B0 250  
43333MIM2T0 200 43333MII2B0 250  
44733MIM2T0 200 44733MII2B0 200  
46833MIM2T0 150 46833MII2B0 200  
48233MIM2T0 140 48233MII2B0 400  
500  
450  
350  
300  
300  
0.47 10.0 x 19.5 x 26.0  
0.68 12.0 x 22.0 x 26.0  
0.82 12.5 x 22.5 x 26.5  
PITCH = 27.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm; C-TOL. = 20 ꢀ  
0.22  
42233MKP2T0  
43333MKP2T0  
44733MKP2T0  
46833MKP2T0  
51033MKP2T0  
51533MKP2T0  
52233MKP2T0  
42233MKM2T0  
43333MKM2T0 100 43333MKI2B0 150  
44733MKM2T0 44733MKI2B0  
42233MKI2B0  
0.33  
0.47  
9.0 x 19.0 x 31.5  
5.5  
0.68 11.0 x 21.0 x 31.0  
7.4  
9.2  
46833MKM2T0 100 46833MKI2B0 125  
51033MKM2T0 100 51033MKI2B0 125  
51533MKM2T0 100 51533MKI2B0 100  
52233MKM2T0 50 52233MKI2B0 75  
-
-
1.0  
1.5  
2.2  
13.0 x 23.0 x 31.0  
18.0 x 28.0 x 31.5 16.1  
21.0 x 31.0 x 31.0 20.3  
PITCH = 7.5 mm 0.4 mm; dt = 0.50 mm 0.05 mm; C-TOL. = 10 ꢀ  
0.0010  
0.0012  
0.0015  
0.0018  
0.0022  
0.0027  
21033KCA2B0  
21233KCA2B0  
21533KCA2B0  
21833KCA2B0  
22233KCA2B0  
22733KCA2B0  
23333KCA2B0  
23933KCA2B0  
24733KCA2B0  
25633KCA2B0  
21033KCM2B0  
21233KCM2B0  
21533KCM2B0  
21833KCM2B0  
22233KCM2B0  
22733KCM2B0  
23333KCM2B0  
23933KCM2B0  
24733KCM2B0  
25633KCM2B0  
21033KCI2B0  
21233KCI2B0  
21533KCI2B0  
21833KCI2B0  
22233KCI2B0  
22733KCI2B0  
23333KCI2B0  
23933KCI2B0  
24733KCI2B0  
25633KCI2B0  
21033KC02W0  
21233KC02W0  
21533KC02W0  
21833KC02W0  
22233KC02W0  
22733KC02W0  
23333KC02W0  
23933KC02W0  
24733KC02W0  
25633KC02W0  
4.0 x 9.0 x 10.0  
0.4  
1500  
1000  
2500  
330 0.0033  
0.0039  
5.0 x 10.5 x 10.0  
6.0 x 11.5 x 10.0  
0.4  
0.8  
1000  
750  
1250  
1000  
2000  
1900  
0.0047  
0.0056  
PITCH = 10.0 mm 0.4 mm; dt = 0.60 mm 0.06 mm; C-TOL. = 10 ꢀ  
0.0010  
0.0012  
0.0015  
0.0018  
0.0022  
0.0027  
0.0033  
21033KDA2B0  
21233KDA2B0  
21533KDA2B0  
21833KDA2B0  
22233KDA2B0  
22733KDA2B0  
23333KDA2B0  
23933KDA2B0  
24733KDA2B0  
25633KDA2B0  
26833KDA2B0  
28233KDA2B0  
31033KDA2B0  
31233KDA2B0  
31533KDA2B0  
31833KDA2B0  
32233KDA2B0  
32733KDA2B0  
33333KDA2B0  
21033KDM2B0  
21233KDM2B0  
21533KDM2B0  
21833KDM2B0  
22233KDM2B0  
22733KDM2B0  
23333KDM2B0  
21033KDI2B0  
21233KDI2B0  
21533KDI2B0  
21833KDI2B0  
22233KDI2B0  
22733KDI2B0  
23333KDI2B0  
21033KD02W0  
21233KD02W0  
21533KD02W0  
21833KD02W0  
22233KD02W0  
22733KD02W0  
23333KD02W0  
0.0039 4.0 x 10.0 x 12.5  
0.6  
23933KDM2B0 1000 23933KDI2B0 1250 23933KD02W0 1400  
0.0047  
0.0056  
0.0068  
0.0082  
0.010  
24733KDM2B0  
25633KDM2B0  
26833KDM2B0  
28233KDM2B0  
31033KDM2B0  
31233KDM2B0  
31533KDM2B0  
31833KDM2B0  
32233KDM2B0  
32733KDM2B0  
33333KDM2B0  
24733KDI2B0  
25633KDI2B0  
26833KDI2B0  
28233KDI2B0  
31033KDI2B0  
31233KDI2B0  
31533KDI2B0  
31833KDI2B0  
32233KDI2B0  
32733KDI2B0  
33333KDI2B0  
24733KD02W0  
25633KD02W0  
26833KD02W0  
28233KD02W0  
31033KD02W0  
31233KD02W0  
31533KD02W0  
31833KD02W0  
32233KD02W0  
32733KD02W0  
33333KD02W0  
0.012  
0.015  
0.018  
5.0 x 11.0 x 12.5  
0.022  
0.82  
1.1  
1000  
750  
1000  
750  
1100  
900  
0.027  
6.0 x 12.0 x 12.5  
0.033  
Revision: 30-Jun-15  
Document Number: 28185  
4
For technical questions, contact: rfi@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
F339X1 330VAC  
Vishay BCcomponents  
www.vishay.com  
ELECTRICAL DATA AND ORDERING INFORMATION  
CATALOG NUMBER F339X1... AND PACKAGING  
LOOSE IN BOX  
TAPED REEL  
SHORT LEADS  
LONG LEADS  
DIMENSIONS  
w x h x l  
(mm)  
URAC CAP.  
MASS  
(g) (3)  
lt = 3.5 mm  
+ 1 mm/- 0.5 mm  
(10 mm)  
or 3.5 mm 0.3 mm  
(15 mm)  
(V)  
(μF)  
Ø = 500 mm (1)(2)  
H = 18.5 mm;  
P0 = 12.7 mm  
lt = 5.0 mm  
lt = 25.0 mm  
SPQ  
SPQ  
SPQ  
1.0 mm  
2.0 mm  
PITCH = 15.0 mm 0.4 mm; dt = 0.60 mm 0.06 mm; C-TOL. = 10 ꢀ  
0.010  
0.012  
0.015  
0.018  
31033KFP2B0  
31233KFP2B0  
31533KFP2B0  
31833KFP2B0  
32233KFP2B0  
32733KFP2B0  
33333KFP2B0  
33933KFP2B0  
34733KFP2B0  
35633KFP2B0  
36833KFP2B0  
31033KFM2B0  
31233KFM2B0  
31533KFM2B0  
31833KFM2B0  
31033KFI2B0  
31233KFI2B0  
31533KFI2B0  
31833KFI2B0  
31033KF02W0  
31233KF02W0  
31533KF02W0  
31833KF02W0  
0.022 5.0 x 11.0 x 17.5  
1.0  
1.4  
32233KFM2B0 1000 32233KFI2B0 1000 32233KF02W0 1100  
0.027  
0.033  
0.039  
0.047  
32733KFM2B0  
33333KFM2B0  
33933KFM2B0  
34733KFM2B0  
35633KFM2B0  
36833KFM2B0  
32733KFI2B0  
33333KFI2B0  
33933KFI2B0  
34733KFI2B0  
35633KFI2B0  
36833KFI2B0  
32733KF02W0  
33333KF02W0  
33933KF02W0  
34733KF02W0  
35633KF02W0  
36833KF02W0  
0.056  
6.0 x 12.0 x 17.5  
0.068  
1000  
1000  
900  
800  
PITCH = 15.0 mm 0.4 mm; dt = 0.80 mm 0.08 mm; C-TOL. = 10 ꢀ  
0.082  
38233KFP2B0  
41033KFP2B0  
41233KFP2B0  
41533KFP2B0  
41833KFP2B0  
38233KFM2B0  
41033KFM2B0  
41233KFM2B0  
41533KFM2B0  
38233KFI2B0  
41033KFI2B0  
41233KFI2B0  
41533KFI2B0  
38233KF02W0  
41033KF02W0  
41233KF02W0  
41533KF02W0  
41833KF02W0  
7.0 x 13.5 x 17.5  
0.100  
1.8  
1000  
1000  
500  
500  
0.120  
8.5 x 15.0 x 17.5  
0.150  
2.4  
3.0  
650  
600  
0.180 10.0 x 16.5 x 17.5  
41833KFM2B0 500 41833KFI2B0 500  
PITCH = 22.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm; C-TOL. = 10 ꢀ  
0.10  
41033KIP2T0  
41233KIP2T0  
41533KIP2T0  
41833KIP2T0  
42233KIP2T0  
42733KIP2T0  
43333KIP2T0  
43933KIP2T0  
44733KIP2T0  
45633KIP2T0  
46833KIP2T0  
41033KIM2T0  
41233KIM2T0  
41533KIM2T0  
41833KIM2T0  
42233KIM2T0  
42733KIM2T0  
43333KIM2T0  
43933KIM2T0  
44733KIM2T0  
45633KIM2T0  
46833KIM2T0  
41033KII2B0  
300 41233KII2B0 250  
41533KII2B0  
41033KI02W0  
41233KI02W0  
41533KI02W0  
41833KI02W0  
42233KI02W0  
42733KI02W0  
43333KI02W0  
43933KI02W0  
44733KI02W0  
45633KI02W0  
46833KI02W0  
0.12  
0.15  
0.18  
0.22  
0.27  
0.33  
6.0 x 15.5 x 26.0  
2.4  
2.9  
600  
500  
330  
41833KII2B0  
7.0 x 16.5 x 26.0  
8.5 x 18.0 x 26.0  
200  
200  
250  
250  
42233KII2B0  
42733KII2B0  
43333KII2B0  
3.8  
6.8  
7.8  
8.0  
450  
350  
300  
300  
0.39 10.0 x 19.5 x 26.0  
200 43933KII2B0 200  
44733KII2B0  
0.47  
12.0 x 22.0 x 26.0  
0.56  
150  
200  
45633KII2B0  
150 46833KII2B0 200  
0.68 12.5 x 22.5 x 26.5  
PITCH = 27.5 mm 0.4 mm; dt = 0.80 mm 0.08 mm; C-TOL. = 10 ꢀ  
0.22  
0.27  
42233KKP2T0  
42733KKP2T0  
43333KKP2T0  
43933KKP2T0  
44733KKP2T0  
45633KKP2T0  
46833KKP2T0  
48233KKP2T0  
51033KKP2T0  
51233KKP2T0  
51533KKP2T0  
51833KKP2T0  
52233KKP2T0  
42233KKM2T0  
42733KKM2T0  
43333KKM2T0  
43933KKM2T0  
44733KKM2T0  
45633KKM2T0  
46833KKM2T0  
48233KKM2T0  
51033KKM2T0  
51233KKM2T0  
42233KKI2B0  
42733KKI2B0  
43333KKI2B0  
43933KKI2B0  
44733KKI2B0  
45633KKI2B0  
46833KKI2B0  
48233KKI2B0  
51033KKI2B0  
51233KKI2B0  
9.0 x 19.0 x 31.5  
0.33  
5.5  
100  
150  
0.39  
0.47  
11.0 x 21.0 x 31.0  
0.56  
7.4  
9.2  
100  
100  
100  
125  
125  
125  
0.68  
-
-
13.0 x 23.0 x 31.0  
0.82  
1.0  
15.0 x 25.0 x 31.5 12.3  
18.0 x 28.0 x 31.5 16.1  
21.0 x 31.0 x 31.0 20.3  
1.2  
1.5  
1.8  
2.2  
51533KKM2T0 100 51533KKI2B0 100  
51833KKM2T0  
52233KKM2T0  
51833KKI2B0  
52233KKI2B0  
50  
75  
Notes  
•
SPQ = Standard Packing Quantity  
Reel diameter = 356 mm is available on request  
H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to “Packaging Information”  
Weight for short lead product only  
(1)  
(2)  
(3)  
Revision: 30-Jun-15  
Document Number: 28185  
5
For technical questions, contact: rfi@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
F339X1 330VAC  
Vishay BCcomponents  
www.vishay.com  
APPROVALS  
SAFETY APPROVALS X1  
VOLTAGE  
VALUE  
FILE NUMBERS  
LINK  
EN 60384-14 (ENEC)  
(= IEC 60384-14 ed-3)  
330 VAC  
1 nF to 2.2 μF  
40031978  
www.vishay.com/doc?28229  
UL 60384-14  
CSA-E384-14  
330 VAC  
330 VAC  
1 nF to 2.2 μF  
1 nF to 2.2 μF  
E354331B  
E354331B  
www.vishay.com/doc?28210  
www.vishay.com/doc?28210  
www.vishay.com/doc?28235  
www.vishay.com/doc?28236  
www.vishay.com/doc?28218  
12001067597 (L)  
12001067600 (F)  
DE1-48009/M1  
CQC  
330 VAC  
1 nF to 2.2 μF  
CB-test certificate  
330 VAC  
1 nF to 2.2 μF  
The ENEC-approval together with the CB-certificate replace all national marks of the following countries (they have already signed the  
ENEC-agreement): Austria; Belgium; Czech. Republic; Denmark; Finland; France; Germany; Greece; Hungary; Ireland; Italy; Luxembourg;  
Netherlands; Norway; Portugal; Slovenian; Spain; Sweden, Switzerland and United Kingdom.  
MOUNTING  
Normal Use  
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for  
mounting on printed-circuit boards by means of automatic insertion machines.  
For detailed tape specifications refer to packaging information www.vishay.com/docs?28139  
Specific Method of Mounting to Withstand Vibration and Shock  
In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the  
printed-circuit board:  
• For original pitch 15 mm the capacitors shall be mechanically fixed by the leads  
• For larger pitches the capacitors shall be mounted in the same way and the body clamped  
Space Requirements on Printed-Circuit Board  
The maximum space for length (lmax.), width (wmax.) and height (hmax.) of film capacitors to take in account on the printed circuit  
board is shown in the drawings.  
• For products with pitch 15 mm, w = l = 0.3 mm and h = 0.1 mm  
• For products with 15 mm < pitch 27.5 mm, w =l = 0.5 mm and h = 0.1 mm  
Eccentricity defined as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product  
concerned.  
wmax. = w + Δw  
Eccentricity  
CBA116  
Imax. = I + ΔI  
hmax. = h + Δh  
Seating plane  
SOLDERING CONDITIONS  
For general soldering conditions and wave soldering profile we refer to the document “Soldering Guidelines for Film  
Capacitors”: www.vishay.com/doc?28171  
STORAGE TEMPERATURE  
Tstg = -25 °C to +35 °C with RH maximum 75 ꢀ without condensation  
RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS  
Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 °C 1 °C, an atmospheric pressure  
of 86 kPa to 106 kPa and a relative humidity of 50 ꢀ 2 ꢀ.  
For reference testing, a conditioning period shall be applied over 96 h 4 h by heating the products in a circulating air oven at  
the rated temperature and a relative humidity not exceeding 20 ꢀ.  
Revision: 30-Jun-15  
Document Number: 28185  
6
For technical questions, contact: rfi@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
F339X1 330VAC  
Vishay BCcomponents  
www.vishay.com  
CHARACTERISTICS  
4
1000  
100  
10  
2
Typical  
0
220 nF ≤ C ≤ 2.2 μF  
47 nF ≤ C ≤ 220 nF  
10 nF ≤ C ≤ 47 nF  
C ≤ 10 nF  
Max.  
- 2  
- 4  
- 6  
Min.  
1
- 50  
0
50  
100  
10  
100  
1000  
10 000  
100 000  
Tamb (°C)  
f (Hz)  
Capacitance as a function of ambient temperature  
(typical curve)  
Tangent of loss angle as a function of frequency  
(typical curve)  
1000  
100  
10  
100  
10  
1
1 nF  
4.7 nF  
10 nF  
47 nF  
1
100 nF  
470 nF  
1 μF  
X1  
0.1  
2.2 μF  
0.01  
0.001  
0.1  
10 000  
100 000  
1 000 000  
10 000 000 100 000 000  
f (Hz)  
1
10  
100  
1000  
10 000  
100 000  
C (nF)  
Impedance as a function of frequency  
(typical curve)  
Resonant frequency as a function of capacitance  
(typical curve)  
1000  
100  
10  
10 000  
1000  
100  
10  
2.2 μF  
1 μF  
470 nF  
100 nF  
47 nF  
10 nF  
4.7 nF  
1 nF  
Tamb ≤ 110 °C  
1
10  
100  
1000  
10 000  
100 000 1 000 000  
f (Hz)  
1000  
10 000  
100 000  
1 000 000  
f (Hz)  
Max. RMS voltage as a function of frequency  
Max. RMS current as a function of frequency  
Revision: 30-Jun-15  
Document Number: 28185  
7
For technical questions, contact: rfi@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
F339X1 330VAC  
Vishay BCcomponents  
www.vishay.com  
106  
105  
104  
0
20  
40  
60  
80  
100  
Tamb (°C)  
Insulation resistance as a function of ambient temperature  
(typical curve)  
APPLICATION NOTES  
• For X1 electromagnetic interference suppression in standard across the line applications (50 Hz/60 Hz) with a maximum  
mains voltage of 330 VAC  
• For series impedance applications we refer to the application note: www.vishay.com/doc?28153  
• For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For  
information depending of the capacitance value and the number of parallel connections contact: rfi@vishay.com  
• These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse  
programs must be used.  
• The maximum ambient temperature must not exceed 110 °C.  
• Rated voltage pulse slope:  
if the pulse voltage is lower than the rated voltage, the values of the specific reference data can be multiplied by 465 VDC and  
divided by the applied voltage.  
INSPECTION REQUIREMENTS  
General Notes  
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication  
IEC 60384-14 ed-3 and Specific Reference Data”.  
GROUP C INSPECTION REQUIREMENTS  
SUB-CLAUSE NUMBER AND TEST  
CONDITIONS  
PERFORMANCE REQUIREMENTS  
SUB-GROUP C1A PART OF SAMPLE OF  
SUB-GROUP C1  
4.1 Dimensions (detail)  
As specified in chapters “General Data” of this  
specification  
Initial measurements  
Capacitance  
Tangent of loss angle at 10 kHz for C 1 μF  
Tangent of loss angle at 1 kHz for C > 1 μF  
4.3 Robustness of  
terminations  
Tensile: load 10 N; 10 s  
Bending: load 5 N; 4 x 90°  
No visible damage  
4.4 Resistance to soldering heat  
No pre-drying  
Method: 1A  
Solder bath: 280 °C 5 °C  
Duration: 10 s  
Revision: 30-Jun-15  
Document Number: 28185  
8
For technical questions, contact: rfi@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
F339X1 330VAC  
Vishay BCcomponents  
www.vishay.com  
GROUP C INSPECTION REQUIREMENTS  
SUB-CLAUSE NUMBER AND TEST  
CONDITIONS  
PERFORMANCE REQUIREMENTS  
SUB-GROUP C1A PART OF SAMPLE OF  
SUB-GROUP C1  
4.19 Component solvent  
resistance  
Isopropylalcohol at room temperature  
Method: 2  
Immersion time: 5 min 0.5 min  
Recovery time: min. 1 h, max. 2 h  
4.4.2 Final measurements  
Visual examination  
No visible damage  
Legible marking  
Capacitance  
|C/C| 5 ꢀ of the value measured initially  
Tangent of loss angle  
Increase of tan   0.008 for 1 μF  
Increase of tan   0.005 for C > 1 μF  
Compared to values measured initially  
Insulation resistance  
As specified in section “Insulation  
Resistance” of this specification  
SUB-GROUP C1B OTHER PART OF  
SAMPLE OF SUB-GROUP C1  
Initial measurements  
Capacitance  
Tangent of loss angle at 10 kHz for C 1 μF  
Tangent of loss angle at 1 kHz for C > 1 μF  
4.20 Solvent resistance of the marking  
Isopropyl alcohol at room temperature  
Method: 1  
No visible damage  
Legible marking  
Rubbing material: cotton wool  
Immersion time: 5 min 0.5 min  
4.6 Rapid change of temperature  
A = -55 °C  
B = +110 °C  
5 cycles  
Duration t = 30 min  
4.6.1 Inspection  
4.7 Vibration  
Visual examination  
No visible damage  
Mounting: see section “Mounting” of this  
specification  
Procedure B4:  
frequency range: 10 Hz to 55 Hz  
Amplitude: 0.75 mm or  
Acceleration 98 m/sꢁ  
(whichever is less severe)  
Total duration 6 h  
4.7.2 Final inspection  
4.9 Shock  
Visual examination  
No visible damage  
Mounting: see section “Mounting” for more  
information  
Pulse shape: half sine  
Acceleration: 490 m/sꢁ  
Duration of pulse: 11 ms  
4.9.2 Final measurements  
Visual examination  
Capacitance  
No visible damage  
|C/C| 5 ꢀ of the value measured initially  
Tangent of loss angle  
Increase of tan   0.008 for 1 μF  
Increase of tan   0.005 for C > 1 μF  
Compared to values measured initially  
Insulation resistance  
As specified in section “Insulation  
Resistance” of this specification  
Revision: 30-Jun-15  
Document Number: 28185  
9
For technical questions, contact: rfi@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
F339X1 330VAC  
Vishay BCcomponents  
www.vishay.com  
GROUP C INSPECTION REQUIREMENTS  
SUB-CLAUSE NUMBER AND TEST  
CONDITIONS  
PERFORMANCE REQUIREMENTS  
SUB-GROUP C1  
COMBINED SAMPLE OF SPECIMENS  
OF SUB-GROUPS C1A AND C1B  
4.11 Climatic sequence  
4.11.1 Initial measurements  
Capacitance  
Measured in 4.4.2 and 4.9.2  
Tangent of loss angle:  
measured initially in C1A and C1B  
4.11.2 Dry heat  
Temperature: 110 °C  
4.11.3 Damp heat cyclic  
Test Db  
Duration: 16 h  
First cycle  
4.11.4 Cold  
Temperature: -55 °C  
4.11.5 Damp heat cyclic  
Test Db  
Duration: 2 h  
remaining cycles  
4.11.6 Final measurements  
Visual examination  
No visible damage  
Legible marking  
Capacitance  
|C/C| 5 ꢀ of the value measured in 4.11.1.  
Tangent of loss angle  
Increase of tan   0.008 for 1 μF  
Increase of tan   0.005 for C > 1 μF  
Compared to values measured in 4.11.1  
Voltage proof  
No permanent breakdown or flash-over  
1900 VDC; 1 min between terminations  
Insulation resistance  
50 ꢀ of values specified in section  
“Insulation Resistance” of this specification  
SUB-GROUP C2  
4.12 Damp heat steady state  
56 days, 40 °C, 90 ꢀ to 95 ꢀ RH,  
no load  
4.12.1 Initial measurements  
4.12.3 Final measurements  
Capacitance  
Tangent of loss angle at 1 kHz  
Visual examination  
No visible damage  
Legible marking  
Capacitance  
|C/C| 5 ꢀ of the value measured in 4.12.1.  
Tangent of loss angle  
Increase of tan   0.008  
Compared to values measured in 4.12.1.  
Voltage proof  
No permanent breakdown or flash-over  
1900 VDC; 1 min between terminations  
Insulation resistance  
50 ꢀ of values specified in section  
“Insulation Resistance” of this specification  
Revision: 30-Jun-15  
Document Number: 28185  
10  
For technical questions, contact: rfi@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
F339X1 330VAC  
Vishay BCcomponents  
www.vishay.com  
GROUP C INSPECTION REQUIREMENTS  
SUB-CLAUSE NUMBER AND TEST  
SUB-GROUP C3  
CONDITIONS  
PERFORMANCE REQUIREMENTS  
4.13.1 Initial measurements  
Capacitance  
Tangent of loss angle at 10 kHz for C 1 μF  
Tangent of loss angle at 1 kHz for C > 1 μF  
4.13 Impulse voltage  
3 successive impulses, full wave, peak  
voltage:  
No self healing breakdowns or flash-over  
X1: 4.0 kV for C 1 μF  
X1: 4.0 kV/C for C > 1 μF  
Max. 24 pulses  
4.14 Endurance  
Duration: 1000 h  
1.25 x URAC at 110 °C  
Once in every hour the voltage is increased  
to 1000 VRMS for 0.1 s via resistor of  
47 5 ꢀ  
4.14.7 Final measurements  
Visual examination  
Capacitance  
No visible damage  
Legible marking  
|C/C| 10 ꢀ compared to values measured  
in 4.13.1.  
Tangent of loss angle  
Increase of tan   0.008 for 1 μF  
Increase of tan   0.005 for C > 1 μF  
Compared to values measured in 4.13.1  
Voltage proof  
No permanent breakdown or flash-over  
1900 VDC; 1 min between terminations  
2160 VAC; 1 min between terminations and  
case  
Insulation resistance  
50 ꢀ of values specified in section  
“Insulation Resistance” of this specification  
SUB-GROUP C4  
4.15 Charge and discharge  
10 000 cycles  
charged to 465 VDC  
Discharge resistance:  
Rmin. = 2.2 for pitch 37.5 mm and 52.5 mm  
465 VDC  
---------------------------------------  
R =  
1.5 x C (dU/dt)  
4.15.1 Initial measurements  
4.15.3 Final measurements  
Capacitance  
Tangent of loss angle at 10 kHz for C 1 μF  
Tangent of loss angle at 1 kHz for C > 1 μF  
Capacitance  
|C/C| 10 ꢀ compared to values measured  
in 4.15.1.  
Tangent of loss angle  
Increase of tan   0.008 for 1 μF  
Increase of tan   0.005 for C > 1 μF  
Compared to values measured in 4.15.1  
Insulation resistance  
50 ꢀ of values specified in section  
“Insulation Resistance” of this specification  
Revision: 30-Jun-15  
Document Number: 28185  
11  
For technical questions, contact: rfi@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
F339X1 330VAC  
Vishay BCcomponents  
www.vishay.com  
GROUP C INSPECTION REQUIREMENTS  
SUB-CLAUSE NUMBER AND TEST  
SUB-GROUP C5  
CONDITIONS  
PERFORMANCE REQUIREMENTS  
0.9 times the value as specified in section  
“Resonant Frequency” of this specification  
4.16 Radio frequency characteristic  
Resonance frequency  
SUB-GROUP C6  
4.17 Passive flammability  
Bore of gas jet: Ø 0.5 mm  
Fuel: butane  
After removing test flame from capacitor, the  
capacitor must not continue to burn for more  
than 10 s. No burning particle must drop from  
the sample.  
Class B  
Test duration for actual volume V in mm3:  
V 250: 10 s  
250 < V 500: 20 s  
500 < V 1750: 30 s  
V > 1750: 60 s  
One flame application  
12 mm  
~ 8 mm  
45.0 °  
SUB-GROUP C7  
4.18 Active flammability  
20 cycles of 4 kV discharges on the test  
capacitor connected to URAC  
The cheese cloth around the capacitors shall  
not burn with a flame.  
No electrical measurements are required.  
Revision: 30-Jun-15  
Document Number: 28185  
12  
For technical questions, contact: rfi@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
Legal Disclaimer Notice  
www.vishay.com  
Vishay  
Disclaimer  
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE  
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.  
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,  
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other  
disclosure relating to any product.  
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or  
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all  
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,  
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular  
purpose, non-infringement and merchantability.  
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of  
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding  
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a  
particular product with the properties described in the product specification is suitable for use in a particular application.  
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over  
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s  
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,  
including but not limited to the warranty expressed therein.  
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining  
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.  
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.  
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for  
such applications.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document  
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.  
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED  
Revision: 08-Feb-17  
Document Number: 91000  
1

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明