FDPCEE731803G4CW [VISHAY]
Axial Vitreous Leaded Wirewound Resistors with CECC Approval;
| 型号： | FDPCEE731803G4CW |
| 厂家： | 
VISHAY |
| 描述： | Axial Vitreous Leaded Wirewound Resistors with CECC Approval |
| 文件： | 总7页 (文件大小：134K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
FDG, FDK, FDP
www.vishay.com
Vishay Draloric
Axial Vitreous Leaded Wirewound Resistors with CECC Approval,
Available with Established Reliability
FEATURES
• CECC 40201-801 approval options:
- Version A, failure rate level E0
- Version E, with established reliability, failure
rate level E7
• High power dissipation in a small design
• Excellent pulse load capability
• Vitreous coating
• Non-flammable and enhanced humidity protection
The FDG, FDK and FDP resistors, with completely welded
construction, are the perfect choice for high continuous
power dissipation up to 11.5 W. The established reliability
and failure rate level E0 and E7 is demonstrated within
CECC qualification. The components of this series are well
suited for harsh environments and exhibit a long lifetime.
With their high pulse power capability, they are the ideal
choice for inrush limiters. Typical applications include but
are not limited to power supplies, voltage dividers, AC filters,
and snubber resistors. Particular requirements can be
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Inrush current limiter
• Power supplies
• Snubber resistor
• Filter resistor
submitted to
a Vishay Draloric application engineer
specifying peak voltage, pulse shape, pulse duration, and
environmental conditions for review.
TECHNICAL SPECIFICATION
RATED
DISSIPATION
P25
RATED
DISSIPATION
P70
OPERATING
RESISTANCE
RANGE (1)
RESISTANCE
TOLERANCE
TEMPERATURE
COEFFICIENT
TYPE
VOLTAGE
Umax.
0.10 to 10.0 k
0.10 to 10.0 k
0.10 to 39.0 k
0.10 to 22.0 k
0.15 to 68.0 k
0.15 to 33.0 k
5 ꢀ
2 ꢀ
5 ꢀ
2 ꢀ
5 ꢀ
2 ꢀ
FDG
3.5 W
6.5 W
3.0 W
5.5 W
10 W
100 V
200 V
350 V
+100 ppm/K
to +180 ppm/K
FDK
FDP
11.5 W
Notes
•
•
The operating temperature range for these resistors is from -55 °C up to 350 °C
The failure rate level E7 (10-7/h, Q = 0.1) corresponds to MIL Level R, is superior to level E6 (10-6/h, Q = 0.3) or level E5 (10-5/h, Q = 1)
and thus may be used as a replacement
(1)
Resistance values are to be selected for 5 ꢀ from the E12 series, and for 2 ꢀ from the E24 series
Revision: 28-Mar-17
Document Number: 21046
1
For technical questions, contact: ww1resistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FDG, FDK, FDP
www.vishay.com
Vishay Draloric
PACKAGING
TYPE
CODE
DESCRIPTION QUANTITY
PACKAGING STYLE
WIDTH
PITCH
PACKAGING DIMENSIONS
Taped acc. IEC 60286-1,
fan-folded in a box
4C
F1
AC G73
R1 R73
500
73 mm
10 mm
324 mm x 101 mm x 49 mm
FDG
Taped acc. IEC 60286-1,
on a reel
1000
73 mm
10 mm
Ø 271 mm x 108 mm
4B
7B
FC
IC
AB G73
AB G88
RC R73
RC R88
LA
250
250
500
500
100
73 mm
88 mm
73 mm
88 mm
-
10 mm
10 mm
10 mm
10 mm
-
324 mm x 101 mm x 49 mm
324 mm x 111 mm x 75 mm
Ø 271 mm x 108 mm
Taped acc. IEC 60286-1,
fan-folded in a box
FDK
Taped acc. IEC 60286-1,
on a reel
Ø 271 mm x 118 mm
FDP
LA
Bulk
225 mm x 140 mm x 70 mm
Notes
•
Width is the nominal spacing between tapes, with the nominal tape width on both sides being 6 mm, and pitch is the nominal standard
spacing between components; tolerances apply according to IEC 60286-1
•
On reels, the flanges are regular octagons with a span of 250 mm, and the arbor hole is Ø 20 mm
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBER: FDPCEE031809JLA000
F
D
P
C
E
E
0
3
1
8
0
9
J
L
A
0
0
0
TYPE
VERSION
VARIANT
RESISTANCE
TOLERANCE
PACKAGING
SPECIAL
FDG
FDK
FDP
CEE0 =
CECC 40201-801,
Version A
CEE7 =
CECC 40201-801,
Version E
3 =
+100 ppm/K
to
3 digit value
G = 2 ꢀ
J = 5 ꢀ
4C
F1
4B
7B
FC
IC
000 = standard
3 digit code =
customized
version
1 digit multiplier
MULTIPLIER
7 = *10-3
+180 ppm/K
8 = *10-2
9 = *10-1
0 = *100
LA
failure rate
level E7
1 = *101
2 = *102
3 = *103
PRODUCT DESCRIPTION: G206 18R 5 % LA CECC 40201-801S FDP E0
G206
18R
5 %
LA
CECC 40201-801S FDP E0
TYPE
RESISTANCE
TOLERANCE
PACKAGING
VERSION
G202 = FDG
G204 = FDK
G206 = FDP
1R2 = 1.2
12K = 12 k
2 %
5 %
AC G..
R1 R..
AB G..
RC R..
LA
CECC 40201-801S FDP E0 =
Version A
CECC 40201-801S FDP E7 =
Version E
failure rate level E7
Note
•
The products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER
Revision: 28-Mar-17
Document Number: 21046
2
For technical questions, contact: ww1resistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FDG, FDK, FDP
www.vishay.com
DESCRIPTION
Vishay Draloric
ASSEMBLY
Vitreous wirewound resistors are best suited for the use in
demanding environmental conditions. Their rugged design
and durable coatings enable these resistors to withstand
extreme environmental stress. The vitreous coating is
designed for high stability and a long lifetime in humid
environments. The coating is resistant to all cleaning
chemicals commonly used in the electronic industry.
The resistors are axial leaded for soldering. The terminals of
the resistors are completely lead (Pb)-free. The special tin
plating used, provides compatibility with lead (Pb)-free and
lead-containing soldering processes.
Special lead forms may be available on request, please
inquire at ww1resistors@vishay.com.
These components are high dissipation power resistors,
customers are advised to use a high melting point solder.
Production is strictly controlled and follows an extensive set
of instructions established for reproducibility. The winding is
done with specific materials on a specially developed fine
ceramic body (Al2O3). The ceramic meets the highest
requirements against mechanical resistance, thermal
shocks, dielectric strength, and insulation resistance at high
temperatures. With different diameters and turn spacings, a
large ohmic value range can be offered. The glaze is fired
layer by layer, several times, at a high temperature
(> 600 °C). The resistors are marked with resistance and
tolerance, and in addition the FDG, FDK and FDP are
marked with the failure rate level. Product quality is verified
by resistance measurement, performed on 100 ꢀ of the
individual resistors.
APPLICATION INFORMATION
The power dissipation of the resistor generates
a
temperature rise with respect to the ambient. The
permissible dissipation is derated for temperatures above
70 °C, as shown in the derating diagram, in order to avoid
overheating of the resistor. The heat dissipated from the
resistor may affect adjacent components, hence proper
clearance will be required in order to avoid overheating.
The resistive wire is hermetically encapsulated. All materials
used are non-flammable and inorganic.
These resistors do not feature a limited lifetime when
operated within the permissible limits. However, resistance
value drift increasing over operating time may result in
exceeding a limit acceptable to the specific application,
thereby establishing a functional lifetime.
Established reliability products within a package unit are
from the same production lot and carry the same date code.
Resistance is measured on the lead wires at a distance of
6 mm from the resistor body. If a greater length of lead wire
is used in the application, the user may need to consider the
additional wire resistance, particularly with low resistance
products.
RELATED PRODUCTS
For the related G200 product family, without CECC
approval, see the datasheet:
MATERIALS
Vishay acknowledges the following systems for the
regulation of hazardous substances:
• “G200 - Axial Vitreous Leaded Wirewound Resistors”
www.vishay.com/doc?21002
In lower continuous power applications and less demanding
environmental conditions the cement coated alternatives,
like the AC series or the Z300 series, might be suitable, see
the datasheets:
• IEC 62474, Material Declaration for Products of and for the
Electrotechnical Industry, with the list of declarable
substances given therein (1)
• The Global Automotive Declarable Substance List
(GADSL) (2)
• “AC Series - Cemented Leaded Wirewound Resistors”
www.vishay.com/doc?28730
• The REACH regulation (1907/2006/EC) and the related list
(3)
of substances with very high concern (SVHC)
supply chain
for its
• “Z300 - Industrial Axial Cemented Leaded Wirewound
Resistors”
www.vishay.com/doc?21007
The products do not contain any of the banned substances
as per IEC 62474, GADSL, or the SVHC list, see
www.vishay.com/how/leadfree. Hence the products fully
comply with the following directives:
• 2000/53/EC End-of-Life Vehicle Directive (ELV) and
Annex II (ELV II)
For precision applications, there is the cement coated PAC
series, see the datasheet:
• “PAC Series - Cemented Leaded Wirewound Precision
Resistors”
www.vishay.com/doc?28731
• 2011/65/EU Restriction of the Use of Hazardous
Substances
2015/863/EU
Directive
(RoHS)
with
amendment
• 2012/19/EU Waste Electrical and Electronic Equipment
Directive (WEEE)
Vishay pursues the elimination of conflict minerals from its
supply chain, see the Conflict Minerals Policy at
www.vishay.com/doc?49037.
Notes
(1)
The IEC 62474 list of declarable substances is maintained in a dedicated database, which is available at http://std.iec.ch/iec62474
The Global Automotive Declarable Substance List (GADSL) is maintained by the American Chemistry Council, and available at
www.gadsl.org
(2)
(3)
The SVHC list is maintained by the European Chemical Agency (ECHA) and available at http://echa.europa.eu/candidate-list-table
Revision: 28-Mar-17
Document Number: 21046
3
For technical questions, contact: ww1resistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FDG, FDK, FDP
www.vishay.com
Vishay Draloric
DERATING according to CECC 40201-801
Axis Title
120
116
10000
1000
100
100
80
60
54
40
20
0
-100
10
-50
-55
0
50
100
150
200
250
300
350
25
70
Ambient Temperature (°C)
2nd line
TEMPERATURE RISE
Axis Title
Axis Title
500
400
300
200
100
0
10000
500
400
300
200
100
0
10000
1000
100
FDK
FDG
1000
100
10
10
0
1
2
3
4
5
0
2
4
6
8
10
Dissipation (W)
2nd line
Dissipation (W)
2nd line
Axis Title
500
400
300
200
100
10000
1000
100
FDP
0
0
10
4
8
12
16
20
Dissipation (W)
2nd line
Revision: 28-Mar-17
Document Number: 21046
4
For technical questions, contact: ww1resistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FDG, FDK, FDP
www.vishay.com
Vishay Draloric
The requirements stated in the Test Procedures And Requirements table are based on the required and permitted limits of
CECC 40201-801. However, a number of improvements against those minimum requirements have been included. The testing
temperatures LCT = -55 °C and UCT = 200 °C are established with the climatic category -55 / 200 / 56 as defined in
CECC 40201-801.
TEST PROCEDURES AND REQUIREMENTS
REQUIREMENTS
EN 60115-1
CLAUSE
IEC 60068-2
TEST
PROCEDURE
PERMISSIBLE CHANGE (R)
TEST METHOD (1)
STABILITY CLASS 5 OR BETTER
4.5
-
-
Resistance
-
2 ꢀ; 5 ꢀ
V-block-method; URMS = Uins; 60 s
Type
FDG
FDK
FDP
Uins
4.7
4.8
Voltage proof
300 V
400 V
500 V
No flashover or breakdown
Temperature
coefficient
At (20 / -55 / 20) °C
and (20 / 200 / 20) °C
-
-
+100 ppm/K to +180 ppm/K
Overload voltage =
10 x rated voltage
Type
Duration
(0.5 ꢀ R + 0.05 )
no visible damage
4.13
Short time overload
FDG
FDK
FDP
5 s
6 s
10 s
21 (Ua1)
21 (Ub)
21 (Uc)
Robustness of
terminations
(0.25 ꢀ R + 0.05 )
4.16
4.17
Tensile, bending and torsion
no visible damage
Solder bath method;
SnPb40; non-activated flux
(235 5) °C; (2 0.2) s
Good tinning
(≥95 % covered)
no visible damage
20 (Ta)
Solderability
Solder bath method;
SnAg3Cu0.5; non-activated flux;
(245 5) °C; (3 0.3) s
Resistance to
soldering heat
Unmounted components;
(260 3) °C; (10 1) s
(0.25 ꢀ R + 0.05 )
4.18
4.19
20 (Tb, Method 1A)
14 (Na)
no visible damage
30 min at LCT = -55 °C
30 min at UCT = 200 °C
5 cycles
Rapid change
of temperature
(0.25 ꢀ R + 0.05 )
no visible damage
Acceleration: 981 m/s2
Pulse duration: 11 ms
Wave form: half sine
(0.25 ꢀ R + 0.05 )
no visible damage
4.21
4.22
27 (Ea)
6 (Fc)
Shock
3 successive shocks to be applied
in each perpendicular direction
Endurance by sweeping;
10 Hz to 2000 Hz;
no resonance;
(0.25 ꢀ R + 0.05 )
no visible damage
Vibration
amplitude 1.5 mm or
200 m/s2; 6 h
Revision: 28-Mar-17
Document Number: 21046
5
For technical questions, contact: ww1resistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FDG, FDK, FDP
www.vishay.com
Vishay Draloric
TEST PROCEDURES AND REQUIREMENTS
REQUIREMENTS
PERMISSIBLE CHANGE (R)
STABILITY CLASS 5 OR BETTER
EN 60115-1
CLAUSE
IEC 60068-2
TEST
PROCEDURE
TEST METHOD (1)
4.23
4.23.2
2 (Bb)
Dry heat 200 °C; 16 h
Damp heat, cyclic
55 °C; 24 h; 90 ꢀ to 100 ꢀ RH;
1 cycle
4.23.3
30 (Db)
Climatic sequence
(0.5 ꢀ R + 0.05 )
4.23.4
4.23.5
1 (Ab)
13 (M)
Cold -55 °C; 2 h
Low air pressure; 1.0 kPa; 2 h;
15 °C to 35 °C
Damp heat, cyclic
55 °C; 24 h; 95 ꢀ to 100 ꢀ RH;
5 cycles
4.23.6
30 (Db)
Ptest = 1.16 x P70
Utest
=
1.16 x P70 x R Umax.
Endurance at
room temperature
t
on = 1.5 h; toff = 0.5 h
4.25.2
-
25 °C; 1000 h
(3.0 ꢀ R + 0.05 )
(6.0 ꢀ R + 0.05 )
25 °C; 8000 h
P
test = Pcat = 0.54 x P70
0.54 x P70 x R Umax.
200 °C; 1000 h
Endurance at upper
category temperature
4.25.3
4.24
-
Utest
=
(3.0 ꢀ R + 0.05 )
(0.5 ꢀ R + 0.05 )
(40 2) °C;
56 days;
(93 3) ꢀ RH
Damp heat,
steady state
78 (Cab)
Note
(1)
The quoted IEC standards are also released as EN standards with the same number and identical contents
DIMENSION AND MASS
L
B
A
d
D
S
(1)
(2)
d
(mm)
B
(mm)
A
(mm)
MASS
(g)
Lmax.
(mm)
Dmax.
Smin.
TYPE
(mm)
(mm)
FDG
13.0
20.0
32.5
6.0
0.8
0.8
0.8
73.0 1.0
73.0 1.0
88.0 1.0
-
83.0 0.3
83.0 0.3
98.0 0.3
107.0 2.0
17.5
1.0
2.2
6.5
FDK
FDP
8.0
25.0
40.0
10.5
Notes
(1)
The body diameter is 0.5 mm larger for resistance values 10
Minimum pitch
(2)
Revision: 28-Mar-17
Document Number: 21046
6
For technical questions, contact: ww1resistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明