HLM02010Z0R150KJ [VISHAY]

RESISTOR, WIRE WOUND, 20 W, 10 %, 90 ppm, 0.15 ohm, CHASSIS MOUNT;


型号：	HLM02010Z0R150KJ
厂家：	VISHAY
描述：	RESISTOR, WIRE WOUND, 20 W, 10 %, 90 ppm, 0.15 ohm, CHASSIS MOUNT
文件：	总5页 (文件大小：114K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

HL, NHL FLAT and HLM, NHLM

Vishay Dale

Wirewound Resistors,

Industrial Power, Flat (HL), Miniature Flat (HLM)

FEATURES

• High temperature silicon coating

• Mounting accommodations ideally suited to

high density packaging

Pb-free

Available

• Self-stacking hardware for horizontal or vertical

placement

• Withstands high vibrations without loosening

• Mounting hardware functions as a heat sink

allowing greater heat dissipation and less

derating of stacked units

RoHS*

TYPE HL FLAT STYLE

COMPLIANT

• Available in non-inductive styles (type NHL and NHLM)

with Aryton-Perry winding

STANDARD ELECTRICAL SPECIFICATIONS

RESISTANCE RANGE Ω

GLOBAL

HISTORICAL

MODEL

POWER RATING P_{25 °C}

WEIGHT (typical)

MODEL

5 ꢀ

10 ꢀ

HL024

HL-24

1.0 - 11K

1.0 - 1.2K

1.0 - 26K

1.0 - 3K

1.0 - 54K

1.0 - 6.8K

1.0 - 77K

1.0 - 9.4K

0.10 - 11K

1.0 - 1.2K

0.10 - 26K

1.0 - 3K

0.10 - 54K

1.0 - 6.8K

0.10 - 77K

1.0 - 9.4K

20.14

30.07

51.25

60.48

76.51

NHL024

NHL-24

HL035

NHL035

HL055

NHL055

HL070

NHL070

HL095

NHL095

HL-35

NHL-35

HL-55

NHL-55

HL-70

NHL-70

HL-95

NHL-95

1.0 - 99.9K

1.0 -12.4K

0.10 - 99.9K

1.0 - 12.4K

TYPE HLM MINIATURE FLAT STYLE

STANDARD ELECTRICAL SPECIFICATIONS

RESISTANCE RANGE Ω

GLOBAL

HISTORICAL

MODEL

POWER RATING P_{25 °C}

WEIGHT (typical)

MODEL

5 ꢀ

10 ꢀ

HLM010

HLM-10

1.0 - 15K

1.0 - 1.8K

1.0 - 26K

1.0 - 3.6K

1.0 - 71K

1.0 - 9.8K

0.10 - 15K

1.0 - 1.8K

0.10 - 26K

1.0 - 3.6K

0.10 - 71K

1.0 - 9.8K

0.41

0.47

0.74

NHLM010

NHLM-10

HLM015

NHLM015

HLM020

NHLM020

HLM-15

NHLM-15

HLM-20

NHLM-20

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: NHLM01010Z10R00JJ (preferred part number format)

GLOBAL

MODEL

TERMINAL

DESIGNATION

TERMINAL RESISTANCE

TOLERANCE

PACKAGING CODE

SPECIAL

FINISH

VALUE

NHLM010

E = Lead

(Pb)-free

Z = Tin/lead

N = Nickel

R = Decimal

K = Thousand

10R00 = 10.0 Ω

1K000 = 1 kΩ

J = 5.0 ꢀ

E = Lead (Pb)-free skin pack

J* = Skin pack (J01)

(Dash Number)

(up to 2 digits)

From 1 - 99

K = 10.0 ꢀ

(See “Standard

Electrical

Specifications”

table above for

additional P/N’s)

* Tin/lead for type “Z”, lead (Pb)-free for type “N”

as applicable

Historical Part Number Example: NHLM-10-10Z 10 Ω 5 ꢀ J01 (will continue to be accepted)

NHLM-10

10Z

10 Ω

5 ꢀ

J01

HISTORICAL MODEL

TERMINAL/FINISH

RESISTANCE VALUE

TOLERANCE

PACKAGING

* Pb containing terminations are not RoHS compliant, exemptions may apply

www.vishay.com

For technical questions, contact: ww2bresistors@vishay.com

Document Number: 30209

Revision: 13-Jul-07

HL, NHL FLAT and HLM, NHLM

Wirewound Resistors,

Industrial Power, Flat (HL), Miniature Flat (HLM)

Vishay Dale

DIMENSIONS in inches [millimeters]

TYPE HL FLAT STYLE

DIMENSIONS in inches [millimeters]

DISTANCE

BETWEEN

TERMINALS

(REF.)

TERMINAL

DESIGNATION

0.063

[1.59]

0.031

[0.79]

MODEL

HL024

0.063

[1.59]

STANDARD OPTIONAL

0.625 [15.88]

1.250

2.500

2.000

0.718

[18.24]

1.468

09Z

16N

1.188 [30.16]

max.

NHL024 [31.75] [63.50] [50.80]

HL035 2.000 3.250 2.750

NHL035 [50.80] [82.55] [69.85]

HL055 3.500 4.750 4.250

NHL055 [88.90] [120.65] [107.95]

HL070 4.750 6.000 5.500

0.594 [15.08]

[37.29]

2.968

0.196 [4.98] Dia. typ.

[75.39]

4.218

0.563 0.030

[14.29 0.794]

0.438 0.030

[11.11 0.794]

NHL070 [120.65] [152.40] [139.70] [107.14]

HL095 6.000 7.250 6.750 5.468

NHL095 [152.40] [184.15] [171.45] [138.89]

0.313 [7.94] Dia.

TYPE HLM MINIATURE FLAT STYLE

0.126 [3.20] Dia. typ.

DIMENSIONS in inches [millimeters]

0.412

[10.46]

max.

DISTANCE

0.063

[1.59]

STANDARD

TERMINAL

DESIGNATION

MODEL

BETWEEN

TERMINALS

(REF.)

0.063

[1.59]

0.031

[0.79]

0.375 [9.52]

HLM010

0.750

1.312

[33.32]

1.562

1.000

[25.40]

1.250

0.406

[10.31]

0.656

10Z

NHLM010 [19.05]

HLM015 1.000

NHLM015 [25.40]

HLM020 2.062

0.343 [8.71]

max.

0.250 [6.35]

[39.67]

2.625

[31.75]

2.313

[16.66]

1.718

NHLM020 [52.37]

[66.68]

[58.75]

[43.64]

0.218 [5.54]

Dia. typ.

TERMINAL DIMENSIONS

DIMENSIONS in inches [millimeters]

DIMENSION

TERMINAL TYPE

TERM 09

TERM 10

0.125

[3.18]

0.188

[4.76]

0.063

[1.60]

0.020

[0.51]

TERM 16

0.188

[4.76]

0.500

[12.70]

0.104

[2.64]

0.020

[0.51]

0.188

[4.76]

0.563

[14.29]

0.050

[1.27]

0.020

[0.51]

Style 09

and 10

Style 16

TERMINAL FINISH

“E” Finish - 100 ꢀ Sn coated steel. “Z” Finish - 60/40 Sn/Pb coated

steel. “N” Finish - Nickel coated steel. Finish for terminal style 16 is

limited to nickel plated steel (N).

Document Number: 30209

Revision: 13-Jul-07

For technical questions, contact: ww2bresistors@vishay.com

www.vishay.com

HL, NHL FLAT and HLM, NHLM

Wirewound Resistors,

Industrial Power, Flat (HL), Miniature Flat (HLM)

Vishay Dale

TECHNICAL SPECIFICATIONS

PARAMETER

UNIT

HL, HLM RESISTOR CHARACTERISTICS

90 for 0.1 Ω to 0.99 Ω; 50 for 1 Ω to 9.9 Ω; 30 for 10 Ω and above

1000, from terminal to mounting hardware

10 x rated power for 5 s

Temperature Coefficient

Dielectric Withstanding Voltage

Short Time Overload

ppm/°C

V_AC

Maximum Working Voltage

Insulation Resistance

(P x R)^1/2

1000 MΩ minimum dry, 100 MΩ minimum after moisture test

- 55 to + 350

Operating Temperature Range

°C

POWER RATING

EXCLUSIVE BRACKET DESIGN

Vishay HL flat and HLM resistor wattage ratings are

based on mounting horizontally to 10" x 10" x 0.04"

[254.0 mm x 254.0 mm x 1.02 mm] steel plate in 25 °C

ambient with no air flow.

Mounting strap fits snugly through resistor core and is

bound against unit by two eccentric spacers. The bracket

eliminates expensive cements and improves heat transfer

and power handling capabilities.

MATERIAL SPECIFICATIONS

NHL, NHLM NON-INDUCTIVE

Element: Copper-nickel alloy of nickel-chrome alloy,

depending on resistance value

Models of equivalent physical and electrical specifications

are available with non-inductive (Aryton-Perry) winding.

They are identified by adding the letter N to the front of the

HL and HLM type designation (NHLM020, for example). For

NHL and NHLM models maximum resistance values are

lower, see STANDARD ELECTRICAL SPECIFICATIONS

table.

Core: Ceramic, steatite

Coating: Special high temperature silicone

Standard Terminals: Model “Z” terminals are tinned steel

Terminal Bands: Steel

Part Marking: DALE, model, wattage, value, tolerance, date

code

www.vishay.com

For technical questions, contact: ww2bresistors@vishay.com

Document Number: 30209

Revision: 13-Jul-07

HL, NHL FLAT and HLM, NHLM

Wirewound Resistors,

Industrial Power, Flat (HL), Miniature Flat (HLM)

Vishay Dale

Derating is required for ambient temperatures above 25 °C per the following graph.

120

100

- 65 - 50

150

250

350

AMBIENT TEMPERATURE IN °C

Derating

PERFORMANCE

TEST

CONDITIONS OF TEST

TEST LIMITS

Rated power applied until thermally stable,

then a minimum of 15 min at - 55 °C

Thermal Shock

(2.0 ꢀ + 0.05 Ω) ΔR

Short Time Overload

10 x rated power for 5 s

(2.0 ꢀ + 0.05 Ω) ΔR

(0.1 ꢀ + 0.05 Ω) ΔR

(2.0 ꢀ + 0.05 Ω) ΔR

(0.2 ꢀ + 0.05 Ω) ΔR

(3.0 ꢀ + 0.05 Ω) ΔR

Dielectric Withstanding Voltage

Low Temperature Storage

High Temperature Exposure

Moisture Resistance

1000 V_rms, 1 min

- 55 °C for 24 h

250 h at + 350 °C

MIL-STD-202 Method 106, 7b not applicable

MIL-STD-202 Method 213, 100 g's for 6 ms, 10 shocks

Frequency varied 10 to 2000 Hz, 20 g peak, 2 directions 6 h each

1000 h at rated power, + 25 °C, 1.5 h “ON”, 0.5 h “OFF”

Shock, Specified Pulse

Vibration, High Frequency

Load Life

Document Number: 30209

Revision: 13-Jul-07

For technical questions, contact: ww2bresistors@vishay.com

www.vishay.com

Legal Disclaimer Notice

Vishay

Disclaimer

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf

(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein

or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any

information provided herein to the maximum extent permitted by law. The product specifications do not expand or

otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed

therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this

document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless

otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such

applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting

from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding

products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000

Revision: 18-Jul-08

www.vishay.com

相关型号：