IM-10RFCM-13100UH5%EZE2 [VISHAY]

General Purpose Inductor, 100uH, 5%, Iron-Core,;


型号：	IM-10RFCM-13100UH5%EZE2
厂家：	VISHAY
描述：	General Purpose Inductor, 100uH, 5%, Iron-Core,
文件：	总3页 (文件大小：59K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

IM-10RFCM-13

www.vishay.com

Vishay Dale

Inductors, Commercial, Molded, Axial Leaded

FEATURES

• Inductance range is 1 μH to 2200 μH

• Proven reliability molded inductors

• Material categorization: 

For definitions of compliance please see

www.vishay.com/doc?99912

ELECTRICAL SPECIFICATIONS

Inductance Tolerance:

10 % on Q-Meter for 1 μH to

22 μH. 5 % 1000 cps bridge for 27 μH to 2200 μH

DENSITY SPECIFICATIONS

Note

Weight: 2 g maximum

•

L and Q are not always tested at the same frequency.

Inductance values tested on Q-Meter, are tested at standard test

frequencies.

ENVIRONMENTAL SPECIFICATIONS

Dielectric Strength: 700 V_RMSat sea level

Operating Temperature: - 55 °C to + 125 °C

Moisture: Meets requirements of MIL-PRF-15305

Shock Resistance: Meets requirements of MIL-PRF-15305

Vibration: High frequency, 10 Hz to 2000 Hz at 20 g 10 %

maximum for 12 logarithmic swings, each of 20 minduration

repeated for each of three mutually perpendicular planes.



Self-Resonant Frequency: Minimum SRF measured with

full length leads on Grid-Dip Meter

Q: Measured on Q-Meter



Rating: 1/3 watt dissipation for M Models

MECHANICAL SPECIFICATIONS

Terminal Strength: Meets 5 pound pull test when tested

per MIL-PRF-15305

DIMENSIONS in inches [millimeters]

0.250 [6.35]

Dia. Max.

1.30 [33.02]

Typ. Min.

#21 0.028 0.002

[0.71 0.051] TCW

0.600 [15.24]

Max.

STANDARD ELECTRICAL SPECIFICATIONS

TEST

FREQ.

(MHz)

SRF

MIN.

(MHz)

DCR

MAX.

()

RATED DC

CURRENT ⁽¹⁾

(mA)

IND.

(μH)

TOL.

(%)

MIN.

MODEL ⁽¹⁾

IM-10RFCM-13

1.0

1.2

1.5

1.8

2.2

2.7

3.3

3.9

4.7

5.6

6.8

8.2

100

7.9

136

124

112

100

0.04

0.05

0.07

0.09

0.14

0.17

0.25

0.32

0.47

2700

2500

2100

1800

1550

1300

1150

1000

870

Note

(1)

Model electricals and tolerances shown.

Revision: 14-Aug-12

Document Number: 34037

For technical questions, contact: magnetics@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

IM-10RFCM-13

www.vishay.com

Vishay Dale

STANDARD ELECTRICAL SPECIFICATIONS

TEST

FREQ.

(MHz)

SRF

MIN.

(MHz)

DCR

RATED DC

CURRENT ⁽¹⁾

(mA)

IND.

(μH)

TOL.

(%)

MIN.

MODEL ⁽¹⁾

MAX.

()

IM-10RFCM-13

0.62

0.72

0.80

1.2

1.5

2.3

3.0

4.2

5.2

6.2

7.0

7.5

730

660

600

520

450

380

300

270

250

220

200

190

185

180

172

165

157

150

145

140

132

125

120

100

2.5

1.5

100

120

150

180

220

270

330

390

470

560

680

820

1000

1200

220

5.5

4.5

3.5

3.0

2.8

2.5

2.2

2.0

1.8

2.2

1.6

0.80

0.25

Note

(1)

Model electricals and tolerances shown.

MARKING

- Color coded

ORDERING INFORMATION

1.0 μH

IM-10RFCM-13

10 %

MODEL

INDUCTANCE

VALUE

INDUCTANCE

TOLERANCE

PACKAGE

CODE

JEDEC LEAD (Pb)-FREE

STANDARD

GLOBAL PART NUMBER

MODEL

PACKAGE

CODE

INDUCTANCE

VALUE

INDUCTANCE

TOLERANCE

SERIES

Revision: 14-Aug-12

Document Number: 34037

For technical questions, contact: magnetics@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.

Revision: 02-Oct-12

Document Number: 91000

相关型号：