LPS600L1001GB [VISHAY]

Power Resistor for Mounting onto a Heatsink Thick Film Technology; 功率电阻安装在散热片厚膜工艺


型号：	LPS600L1001GB
厂家：	VISHAY
描述：	Power Resistor for Mounting onto a Heatsink Thick Film Technology 功率电阻安装在散热片厚膜工艺散热片
文件：	总4页 (文件大小：140K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

LPS 600

Vishay Sfernice

Power Resistor for Mounting onto a Heatsink

Thick Film Technology

FEATURES

• 600 W at 85 °C bottom case temperature

• Wide resistance range: 0.3 Ω to 900 kΩ

E24 series

• Non inductive

• Easy mounting

• Low thermal radiation of the case

• Compliant to RoHS directive 2002/95/EC

DIMENSIONS in millimeters

25.8

LPS 600

6K8 5 %

25.2

21.2

15.2

64.7

2 x M4 useful depth: 8

2 x Ø 4.2

Ø 20

13.6

Note

• Tolerances unless stated: 0.2 mm

MECHANICAL SPECIFICATIONS

ELECTRICAL SPECIFICATIONS

Mechanical Protection

Resistive Element

Substrate

Insulated case UL 94 V-0

Resistance Range

0.3 Ω to 900 kΩ

Thick film

Alumina

Tolerances (Standard)

1 % to 10 %

600 W at + 85 °C

bottom case temperature

End Connections

Tightening Torque

- On Connections

- On Heatsink

Screws M4

Power Rating and

Thermal Resistance

_{TH (j - c)}: 0.112 °C/W

2 Nm

Temperature Coefficient

- 55 °C/155 °C

R ≤ 1 U: 500 ppm/°C

1 U < R ≤ 10 U: 300 ppm/°C

10 U < R: 150 ppm/°C

2 Nm

Maximum Torque

Weight

2.5 Nm

83 g 10 %

Standard

IEC 60115-1

Limiting Element Voltage U_L

5 kV

ENVIRONMENTAL SPECIFICATIONS

Dielectric Strength

IEC 60115-1, 1 min,

10 mA max.

7 kV_RMSor 12 kV_RMS

Temperature Range

Climatic Category

- 55 °C to 155 °C

55/155/56

Insulation Resistance

Inductance

≥ 10⁴MΩ

≤ 0.1 µH

41.66 kΩ

Critical Resistance

www.vishay.com

For technical questions, contact: sfer@vishay.com

Document Number: 50053

Revision: 27-Oct-10

LPS 600

Power Resistor for Mounting onto a Heatsink

Thick Film Technology

Vishay Sfernice

PERFORMANCE

TESTS

CONDITIONS

REQUIREMENTS

IEC 60115-1

2 x P_r/10 s

U_max.≤ U_L= 5000 V

Momentary Overload

(0.25 % + 0.05 Ω)

(0.5 % + 0.05 Ω)

IEC 60115-1/IEC 60068-2-14 Test Na

50 cycles

Rapid Temperature Change

- 55 °C to + 155 °C

IEC 60115-1

1000 h (90/30) P_rat 85 °C

Load Life

(0.5 % + 0.05 Ω)

(0.25 % + 0.05 Ω)

(1 % + 0.05 Ω)

IEC 60115-1

56 days RH 95 %/40 °C

Humidity (Steady State)

Vibration

MIL STD 202 Method 204 Cond. D

(10 g; 5/500 Hz)

IEC 60115-1

(55/155/56)

Climatic Sequence

RECOMMENDATIONS FOR MOUNTING ONTO A HEATSINK

• Surfaces in contact must be carefully cleaned.

• The heatsink must have an acceptable flatness: From 0.05 mm to 0.1 mm/100 mm.

• Roughness of the heatsink must be around 6.3 µm. In order to improve thermal conductivity, surfaces in contact (alumina,

heatsink) should be coated with a silicone grease (type SI 340 from Rhône-Poulenc or Dow 340 from Dow Corning) or a thermal

film (type Q Pad II) easier and faster to install than the grease.

• The fastening of the resistor to the heatsink is under pressure control of two screws tightened at 2 Nm for full power availability.

LPS 300

Tightening Torque on Heatsink

2 Nm

• The following accessories are supplied with each product: 2 screws CHC M4 x 25 class 8.8 and 2 M4 contact lock washers for

heatsink mounting,

2 screws TH M4 x 6/6 and 2 M4 contact lock washers for

connections.

CHOICE OF THE HEATSINK

The user must choose the heatsink according to the working conditions of the component (power, room temperature). Maximum

working temperature must not exceed 155 °C. The dissipated power is simply calculated by the following ratio:

ΔT

---------------------------------------------------------

P =

[R_{TH (j - c)}+ R_{TH (c - a)}

]

Expressed in W

ΔT:

R_{TH (j - c)}

Difference between maximum working temperature and room temperature

Thermal resistance value measured between resistive layer and outer side of the resistor. It is the thermal

resistance of the component: (see specifications environmental paragraph).

R_{TH (c - a)}

Thermal resistance value measured between outer side of the resistor and room temperature. It is the thermal

resistance of the thermal interface, the heatsink (type, shape) and the quality of the fastening device.

Example:

_{TH (c - a)}for LPS 600 power dissipation 180 W at + 50 °C room temperature.

ΔT ≤ 155 °C - 50 °C = 105 °C

ΔT

105

---------

= 0.58 °C/W

-------

_{TH (j - c)}+ R_{TH (c - a)}

_{TH (j - c)}= 0.112 °C/W

180

_{TH (c - a)}= 0.58 °C/W - 0.112 °C/W = 0.468 °C/W

Document Number: 50053

Revision: 27-Oct-10

For technical questions, contact: sfer@vishay.com

www.vishay.com

LPS 600

Power Resistor for Mounting onto a Heatsink

Thick Film Technology

Vishay Sfernice

OVERLOADS

POWER RATING

In any case the applied voltage must be lower than U_L= 5000 V.

Short time overload: 2 x P_r/10 s

The temperature of the case should be maintained within the

limits specified in the following figure.

Accidental overload: The values indicated on the following

graph are applicable to resistors in air or mounted onto a

heatsink.

To optimize the thermal conduction, contacting surfaces

should be coated with silicone grease or thermal film, and

heatsink mounting screws tightened to 2 Nm.

ENERGY CURVE

10 000

100

1000

100

0.1

100

150

155

200

10^-6

10^-5

10^-4

10^-3

10^-2

10^-1

BOTTOM CASE TEMPERATURE IN °C

OVERLOAD DURATION IN s

MARKING

PACKAGING

Box of 15 units

Series, style, ohmic value (in Ω), tolerance (in %),

manufacturing date, Vishay Sfernice trademark.

ORDERING INFORMATION

LPS

600

100 kΩ

1 %

xxx

BO15

MODEL

STYLE

RESISTANCE

VALUE

TOLERANCE

CUSTOM

DESIGN

PACKAGING

LEAD (Pb)-FREE

1 %

2 %

5 %

Optional

on request:

Special TCR,

shape etc.

10 %

GLOBAL PART NUMBER INFORMATION

GLOBAL

MODEL

SPECIAL

DIELECTRIC

OHMIC VALUE

TOLERANCE

PACKAGING

B = Box 15 pieces

LPS 600

L = Dielectric

strength 7 kV

H = Dielectric

strength 12 kV

The first three digits are

significant figures and the

last digit specifies the

number of zeros to follow. R

designates decimal point.

F = 1 %

G = 2 %

J = 5 %

K = 10 %

As applicable

ZAx

48R7 = 48.7 Ω

47R0 = 47 Ω

1001 = 1 kΩ

4R70 = 4.7 Ω

R240 = 0.24 Ω

www.vishay.com

For technical questions, contact: sfer@vishay.com

Document Number: 50053

Revision: 27-Oct-10

Legal Disclaimer Notice

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000

Revision: 11-Mar-11

www.vishay.com

相关型号：