M100A-E3/73 [VISHAY]
DIODE 1 A, 50 V, SILICON, SIGNAL DIODE, DO-204AL, ROHS COMPLIANT, PLASTIC, DO-41, 2 PIN, Signal Diode;
| 型号： | M100A-E3/73 |
| 厂家： | 
VISHAY |
| 描述： | DIODE 1 A, 50 V, SILICON, SIGNAL DIODE, DO-204AL, ROHS COMPLIANT, PLASTIC, DO-41, 2 PIN, Signal Diode 二极管 |
| 文件： | 总4页 (文件大小：66K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
M100A thru M100M
Vishay General Semiconductor
General Purpose Plastic Rectifier
FEATURES
• Low forward voltage drop
• Low leakage current
• High forward surge capability
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• Compliant to RoHS directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
DO-204AL (DO-41)
TYPICAL APPLICATIONS
For use in general purpose rectification of power supplies,
inverters, converters and freewheeling diodes application.
PRIMARY CHARACTERISTICS
Note
IF(AV)
1.0 A
• These devices are not AEC-Q101 qualified.
VRRM
IFSM
IR
50 V to 1000 V
50 A
MECHANICAL DATA
Case: DO-204AL, molded epoxy body
Molding compound meets UL 94 V-0 flammability rating
1.0 μA
Base P/N-E3 - RoHS compliant, commercial grade
VF
1.0 V, 1.1 V
150 °C
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
TJ max.
E3 suffix meets JESD 201 class 1A whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL M100A M100B M100D M100G M100J M100K M100M UNIT
Maximum repetitive peak reverse voltage
Maximum RMS voltage
VRRM
VRMS
VDC
50
35
50
100
70
200
140
200
400
280
400
600
420
600
800
560
800
1000
700
V
V
V
Maximum DC blocking voltage
100
1000
Maximum average forward rectified current
0.375" (9.5 mm) lead length at TA = 100 °C
IF(AV)
IFSM
1.0
50
A
A
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
Maximum full load reverse current full cycle average
0.375" (9.5 mm) lead length at TA = 55 °C
IR(AV)
100
μA
°C
Operating junction and storage temperature range
TJ, TSTG
- 50 to + 150
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL M100A M100B M100D M100G M100J M100K M100M UNIT
Maximum
instantaneous
forward voltage
1.0 A
VF
1.0
1.1
V
Maximum DC reverse
current at rated DC
blocking voltage
TA = 25 °C
1.0
50
IR
μA
TA = 100 °C
Typical reverse
recovery time
IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A
trr
2.0
15
μs
Typical junction
capacitance
4.0 V, 1 MHz
CJ
pF
Document Number: 88659
Revision: 03-Nov-09
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com
1
M100A thru M100M
Vishay General Semiconductor
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL M100A M100B M100D M100G M100J M100K M100M UNIT
(1)
RθJA
RθJL
50
25
Typical thermal resistance
°C/W
(1)
Note
(1)
Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5 mm) lead length, P.C.B. mounted
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY
DELIVERY MODE
M100J-E3/54
0.33
0.33
54
73
5500
3000
13" diameter paper tape and reel
Ammo pack packaging
M100J-E3/73
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
1.2
100
10
60 Hz Resistive or
Inductive Load
1.0
0.8
0.6
0.4
TJ = 25 °C
1
0.1
0.2"
x 0.2
"
(0.5 mm x 0.5 mm)
Pulse Width = 300 μs
1 % Duty Cycle
0.2
0
Copper Pads
(9.5 mm) Lead Length
0.375
"
0.01
0.6
0.8
1.0
1.2
1.4
1.6
1.8
0
25
50
75
100
125
150
Instantaneous Forward Voltage (V)
Ambient Temperature (°C)
Fig. 1 - Forward Current Derating Curve
Fig. 3 - Typical Instantaneous Forward Characteristics
50
40
30
20
10
0
1000
TA = 75 °C
8.3 ms Single Half Sine-Wave
TJ = 150 °C
100
10
1
0.1
0.01
TJ = 25 °C
60
1
40
80
10
100
0
20
100
Number of Cycles at 60 Hz
Percentage of Peak Reverse Voltage (%)
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
Fig. 4 - Typical Reverse Characteristics
www.vishay.com
2
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
Document Number: 88659
Revision: 03-Nov-09
M100A thru M100M
Vishay General Semiconductor
100
100
10
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
1
0.1
0.01
1
0.1
0.1
1
10
100
1
10
100
t - Pulse Duration (s)
Reverse Voltage (V)
Fig. 5 - Typical Junction Capacitance
Fig. 6 - Typical Transient Thermal Impedance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-204AL (DO-41)
1.0 (25.4)
MIN.
0.107 (2.7)
0.080 (2.0)
DIA.
0.205 (5.2)
0.160 (4.1)
1.0 (25.4)
MIN.
0.034 (0.86)
0.028 (0.71)
DIA.
Document Number: 88659
Revision: 03-Nov-09
For technical questions within your region, please contact one of the following:
DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
www.vishay.com
3
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号：
M100A/23
Rectifier Diode, 1 Element, 1A, 50V V(RRM), Silicon, DO-204AL, PLASTIC, DO-41, 2 PIN
VISHAY
M100B-E3
DIODE 1 A, 100 V, SILICON, SIGNAL DIODE, DO-204AL, LEAD FREE, PLASTIC, DO-41, 2 PIN, Signal Diode
VISHAY
M100B-E3/54
DIODE 1 A, 100 V, SILICON, SIGNAL DIODE, DO-204AL, ROHS COMPLIANT, PLASTIC, DO-41, 2 PIN, Signal Diode
VISHAY
M100B/1
Rectifier Diode, 1 Element, 1A, 100V V(RRM), Silicon, DO-204AL, PLASTIC, DO-41, 2 PIN
VISHAY
M100B/23
Rectifier Diode, 1 Element, 1A, 100V V(RRM), Silicon, DO-204AL, PLASTIC, DO-41, 2 PIN
VISHAY
M100D/1
Rectifier Diode, 1 Element, 1A, 200V V(RRM), Silicon, DO-204AL, PLASTIC, DO-41, 2 PIN
VISHAY
M100D/23
Rectifier Diode, 1 Element, 1A, 200V V(RRM), Silicon, DO-204AL, PLASTIC, DO-41, 2 PIN
VISHAY
©2020 ICPDF网 联系我们和版权申明