M35C256K008FZSL [VISHAY]
Tantalum Capacitor, Polarized, Tantalum (dry/solid), 8V, 10% +Tol, 10% -Tol, 25uF, Surface Mount, CHIP;
| 型号： | M35C256K008FZSL |
| 厂家： | 
VISHAY |
| 描述： | Tantalum Capacitor, Polarized, Tantalum (dry/solid), 8V, 10% +Tol, 10% -Tol, 25uF, Surface Mount, CHIP 电容器 |
| 文件： | 总5页 (文件大小：94K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
M35
Vishay
Wet Tantalum Capacitors
Surface Mount, Molded Case
FEATURES
• Molded surface mountable design
Pb-free
• Terminations: standard tin/lead (SnPb),
Available
100 % tin (RoHS compliant) available
RoHS*
COMPLIANT
• Industry standard ratings
• Model M35 wet tantalum electrolytic chip capacitors
incorporate the advantages of all the varieties of
electrolytic capacitors and eliminate most of the
disadvantages. These units have a 3 V reverse voltage
capability at + 85 °C and a higher ripple current capability
than any other electrolytic type with similar combinations of
capacitance and case size.
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
Life Test: Capacitors are capable of withstanding a 2000 h
life test at a temperature of + 85 °C or + 125 °C at the
applicable rated DC working voltage.
(To + 125 °C with voltage derating)
Capacitance Tolerance: At 120 Hz, + 25 °C.
standard. 10 %, 5 % available as special.
20 %
Following life test:
DC Leakage Current (DCL Max.): At + 25 °C and above:
Leakage current shall not exceed the values listed in the
Standard Ratings Tables.
1. DCL, measured at + 85 °C rated voltage, shall not be in
excess of the original requirement.
2. The equivalent series resistance shall not exceed 150 %
of the initial requirement.
3. Change in capacitance shall not exceed 10 % from the
initial measurement.
ORDERING INFORMATION
M35
C
826
M
125
B
Z
S
L
MODEL CASE
CODE
CAPACITANCE CAPACITANCE DC VOLTAGE RATING
TERMNATION AND
PACKAGING
RELIABILITY
LEVEL
TEMP
ESR
TOLERANCE
AT + 85 °C
See
This is
K = 10 %
M = 20 %
This is expressed in V. A = 100 % Tin (RoHS
To complete the compliant), bulk
three-digit block, zeros B = Std, tin/lead, bulk
precede the voltage C = 100 % Tin,
Z = Non-ER S = Std. S = Std.
Ratings expressed in
L = Low
and
picofarads.The
first two digits
are the
Case
Codes
Table
rating. A decimal point full 7" reel
significant
is indicated by an “R”
(6R3 = 6.3 V).
D = Tin/lead, 7" reel
E = 100 % Tin,
1/2 reel qty.
figures. The
third is the
number of
F = Tin/lead,1/2 qty.
zeros to follow.
Packaging: The use of formed plastic trays for packing bulk components is standard. Tape and reel is is available.
DIMENSIONS in millimeters
W
L
P
CASE CODE
L (MAX.)
W
H
P
TW
TH (MIN.)
C
19.3
6.3 0.3
6.8 0.3
2.2 0.3
1.7 0.2
3.8
* Pb containing terminations are not RoHS compliant, exemptions may apply.
www.vishay.com
2
For technical questions, contact: wettants@vishay.com
Document Number: 40095
Revision: 22-Jan-08
M35
Wet Tantalum Capacitors
Surface Mount, Molded Case
Vishay
RECOMMENDED REFLOW PROFILES
Tp °C
tp
TL °C
Ts MAX. °C
Ts MIN. °C
(tL)
PREHEAT (ts)
25 °C
TIME (s)
ALL CASE CODES
Tp
PB free
TP
Sn/Pb
TL
PB free
TL
Sn/Pb
Ts MIN. Ts MIN. Ts MAX. Ts MAX.
ts
ts
Sn/Pb
tp
10
tL
TYPE
PB free
Sn/Pb
PB free
Sn/Pb
PB free
M 35
260 °C
240 °C
217 °C
183 °C
150 °C
100 °C
200 °C
150 °C 60 to 150 60 to 90
60
MOUNTING:
Due to size and weight of these capacitors, we recommended that a supplemental mounting restraint we used in printed circuit
board attachment in addition to the reflowed solder.
One on recommendation is t use an adhesive such as defined in the J-STD-001DS.
This is the Space Application Electronic Hardware Addendum to J-STD-001(Requirements for Solder Electrical and Electronic
Assemblies).
STANDARD RATINGS
MAX.
RIPPLE
40 kHz
rms
MAX. DCL (µA)
AT
MAX. CAPACITANCE CHANGE
(%) AT
MAX. ESR MAX. IMP.
CAP
(µF)
CASE
CODE
PART NUMBER*
AT
AT
+ 25 °C
- 55 °C
+ 85 °C
+ 25 °C
- 55 °C
+ 85 °C + 125 °C
6 WVDC AT + 85 °C . . . 4 WVDC AT + 125 °C
30
68
220
C
C
C
M35C306(1)006(2)ZS(5)
M35C686(1)006(2)ZS(5)
M35C227(1)006(2)ZS(5)
4.0
3.2
3.0
100
60
36
1.0
1.0
2.0
2.0
2.0
9.0
- 40
- 40
- 64
+ 10.5
+ 14
+ 13
+ 12
+ 16
+ 16
820
960
1000
8 WVDC AT + 85 °C . . . 5 WVDC AT + 125 °C
25
56
180
C
C
C
M35C256(1)008(2)ZS(5)
M35C566(1)008(2)ZS(5)
M35C187(1)008(2)ZS(5)
4.0
3.3
3.0
100
59
45
1.0
1.0
2.0
2.0
2.0
9.0
- 40
- 40
- 60
+ 10.5
+ 14
+ 13
+ 12
+ 16
+ 16
820
900
1000
10 WVDC AT + 85 °C . . . 7 WVDC AT + 125 °C
20
47
120
150
C
C
C
C
M35C206(1)010(2)ZS(5)
M35C476(1)010(2)ZS(5)
M35C127(1)010(2)ZS(5)
M35C157(1)010(2)ZS(5)
4.0
3.7
3.2
3.0
120
90
54
1.0
1.0
2.0
2.0
2.0
2.0
6.0
9.0
- 32
- 36
- 40
- 55
+ 10.5
+ 14
+ 14
+ 12
+ 16
+ 16
+ 16
820
855
900
900
54
+ 13
15 WVDC AT + 85 °C . . . 10 WVDC AT + 125 °C
15
33
82
C
C
C
C
M35C156(1)015(2)ZS(5)
M35C336(1)015(2)ZS(5)
M35C826(1)015(2)ZS(5)
M35C107(1)015(2)ZS(5)
4.4
4.0
3.9
3.9
155
90
72
1.0
1.0
2.0
2.0
2.0
2.0
6.0
9.0
- 24
- 28
- 35
- 44
+ 10.5
+ 14
+ 12
+ 12
+ 16
+ 16
+ 16
780
820
900
900
100
72
+ 13
25 WVDC AT + 85 °C . . . 15 WVDC AT + 125 °C
10
22
56
68
C
C
C
C
M35C106(1)025(2)ZS(5)
M35C226(1)025(2)ZS(5)
M35C566(1)025(2)ZS(5)
M35C686(1)025(2)ZS(5)
5.3
4.2
4.3
4.3
220
140
90
1.0
1.0
2.0
2.0
2.0
2.0
6.0
9.0
- 16
- 20
- 25
- 40
+ 8
+ 10.5
+ 12
+ 9
715
800
850
850
+ 12
+ 15
+ 15
90
+ 12
Document Number: 40095
Revision: 22-Jan-08
For technical questions, contact: wettants@vishay.com
www.vishay.com
3
M35
Wet Tantalum Capacitors
Surface Mount, Molded Case
Vishay
STANDARD RATINGS
MAX.
RIPPLE
40 kHz
rms
MAX. DCL (µA)
MAX. CAPACITANCE CHANGE
(%) AT
MAX. ESR MAX. IMP.
CAP
(µF)
CASE
CODE
AT
PART NUMBER*
AT
AT
+ 25 °C
- 55 °C
+ 85 °C
+ 25 °C
- 55 °C
+ 85 °C + 125 °C
30 WVDC AT + 85 °C . . . 20 WVDC AT + 125 °C
8
C
C
C
C
M35C805(1)030(2)ZS(5)
M35C156(1)030(2)ZS(5)
M35C476(1)030(2)ZS(5)
M35C566(1)030(2)ZS(5)
6.6
6.2
5.2
5.2
275
175
100
100
1.0
1.0
2.0
2.0
2.0
2.0
6.0
9.0
- 16
- 20
- 23
- 38
+ 8
+ 10.5
+ 12
+ 12
+ 12
+ 15
+ 15
640
780
800
800
15
47
56
+ 12
35 WVDC AT + 85 °C . . . 22 WVDC AT + 125 °C
15
39
C
C
M35C156(1)035(2)ZS(5)
M35C396(1)035(2)ZS(5)
6.2
4.1
175
61
0.75
2.0
1.5
6.0
- 20
- 22
+ 10.5
+ 12
+ 12
+ 14
660
820
50 WVDC AT + 85 °C . . . 30 WVDC AT + 125 °C
5
10
33
C
C
C
M35C505(1)050(2)ZS(5)
M35C106(1)050(2)ZS(5)
M35C336(1)050(2)ZS(5)
8.0
6.4
5.0
400
250
135
1.0
1.0
2.0
2.0
2.0
9.0
- 16
- 24
- 29
+ 5
+ 8
+ 10
+ 6
+ 9
+ 12
580
715
700
60 WVDC AT + 85 °C . . . 40 WVDC AT + 125 °C
4
8.2
27
C
C
C
M35C405(1)060(2)ZS(5)
M35C825(1)060(2)ZS(5
M35C276(1)060(2)ZS(5
9.3
6.6
5.0
550
275
144
1.0
1.0
3.0
2.0
2.0
12
- 16
- 24
- 24
+ 5
+ 8
+ 10
+ 6
+ 9
+ 12
525
625
700
75 WVDC AT + 85 °C . . .50 WVDC AT + 125 °C
3.5
6.8
22
C
C
C
M35C355(1)075(2)ZS(5)
M35C685(1)075(2)ZS(5)
M35C226(1)075(2)ZS(5)
9.5
6.8
5.1
650
300
157
1.0
1.0
3.0
2.0
2.0
12
- 16
- 20
- 19
+ 5
+ 8
+ 10
+ 6
+ 9
+ 12
525
610
600
100 WVDC AT + 85 °C . . . 65 WVDC AT + 125 °C
2.5
4.7
10
C
C
C
M35C255(1)100(2)ZS(5)
M35C475(1)100(2)ZS(5
M35C106(1)100(2)ZS(5
10.6
8.5
5.9
950
500
200
1.0
1.0
3.0
2.0
2.0
12
- 16
- 16
- 17
+ 7
+ 7
+ 10
+ 8
+ 8
+ 12
505
565
800
125 WVDC AT + 85 °C . . . 85 WVDC AT + 125 °C
1.7
3.6
6.8
C
C
C
M35C175(1)125(2)ZS(5)
M35C365(1)125(2)ZS(5)
M35C685(1)125(2)ZS(5)
15.6
10.0
11.7
1250
600
300
1.0
1.0
3.0
2.0
2.0
12
- 16
-16
-14
+7
+7
+ 10
+8
+8
+ 12
415
520
700
Notes:
1. Capacitance tolerance: K, M
2. Termination/packaging: (see Ordering Information)
3. Reliability level: Z = non-ER
4. Temperature: S = STD
5. ESR: S = STD, L = Low (1/2 standard ESR value)
PERFORMANCE CHARACTERISTICS OF M35 CAPACITORS
ELECTRICAL CHARACTERISTICS
ITEM
PERFORMANCE CHARACTERISTICS
Operating temperature range
Capacitor tolerance
Capacitance change (maximum)
ESR
- 55 °C to + 125 °C
20 %, 10 % at 120 Hz
AC ripple current
Limits per the Standard Ratings Table. Measured per requirements of MIL-PRF--39006
DCL (maximum leakage current)
Impedance (maximum)
Reverse voltage shall be in accordance with MIL-PRF-39006/22.
Units are capable of withstanding 3 V in reverse at + 85 °C for 125 h
Surge voltage shall be in accordance with MIL-PRF-39006
Reverse voltage
The DC rated surge voltage is the maximum voltage to which the capacitors should be subjected
under any conditions. This includes transients and peak ripple at the highest line voltage. The
surge voltage is 115 % of rated DC working voltage.
Surge voltage
Life test
The capacitors shall be capable of withstanding a 2000 h life test at 85 °C at rated voltage.
www.vishay.com
4
For technical questions, contact: wettants@vishay.com
Document Number: 40095
Revision: 22-Jan-08
M35
Wet Tantalum Capacitors
Surface Mount, Molded Case
Vishay
ENVIRONMENTAL CHARACTERISTICS
ITEM
CONDITION
COMMENTS
Hermeticity
Moisture resistance
MIL-PRF-39006
MIL-PRF-39006
The internal component has been tested to be compliant to the
hermeticity requirements of MIL-PRF-39006/22.
The internal component has been tested to be compliant to the
moisture resistance requirements of MIL-PRF-39006/22.
The internal component has been tested to be compliant to the
altitude or reduced barometric pressure requirements of
MIL-PRF-39006/22 (150 000 feet)
Altitude/barometric Pressure
(reduced)
MIL-PRF-39006
MECHANICAL CHARACTERISTICS
ITEM
CONDITION
COMMENTS
Thermal shock
Shock
MIL-STD-202, Method 107, A
MIL-STD-202, Method 213
MIL-STD-202, Method 204
MIL-STD-202, Method 214
Per MIL-PRF-39006, 5 cycles
Per MIL-PRF-39006, 500 g
Per MIL-PRF-39006, 80 g
Per MIL-PRF-39006, 53.79 g
Vibration (high frequency)
Vibration (random)
The capacitor must withstand solder dipping of the terminals
at 260 °C for 10 s. The capacitor must not be visibly damaged and
the electrical characteristics must not be affected.
Resistance to solder heat
Solderability
MIL-STD-202, Method 210
ANSI J-STD-002
The terminations must be solderable per the requirements of
MIL-PRF-55365 para. 4.10
The part marking shall include Vishay name, trademark,
capacitance, voltage, date code and lot symbol.
Part markings
MIL-STD-1285
2.5
Weight (typical) in g
PAD DIMENSIONS in inches [mm]
A
D
C
B
C
CASE CODE M35
A (MIN.)
B (NOM.)
C (NOM.)
D (NOM.)
C
[19.3]
[12.3]
[3.5]
[3.0]
STANDARD PACKAGING QUANTITY
QUANTITY (PCS/REEL)
SERIES
CASE CODE
7" REEL
1/2 REEL
M35
C
100
50
www.vishay.com
5
For technical questions, contact: wettants@vishay.com
Document Number: 40095
Revision: 22-Jan-08
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明