M8340101K1004FBD04 [VISHAY]

Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ Dual-In-Line Package, 01, 03, 05 Schematics; 厚膜电阻网络军事， MIL -PRF- 83401合格， RZ型双列直插式封装， 01 ， 03 ， 05示意图


型号：	M8340101K1004FBD04
厂家：	VISHAY
描述：	Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified, Type RZ Dual-In-Line Package, 01, 03, 05 Schematics 厚膜电阻网络军事， MIL -PRF- 83401合格， RZ型双列直插式封装， 01 ， 03 ， 05示意图军事
文件：	总5页 (文件大小：135K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MDM (Military M83401)

Vishay Dale

Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified,

Type RZ Dual-In-Line Package, 01, 03, 05 Schematics

FEATURES

• MIL-PRF-83401 qualified

• Epoxy molded construction

• All device leads are hot-solder dipped

• Available in tube pack

• TCR available in “K” ( 100 ppmꢀ/Cꢁ or “M” ( 300 ppmꢀ/Cꢁ

depending on style

• 100 % screen tested per Group A, Subgroup 1 of

MIL-PRF-83401

• All devices are capable of passing the MIL-STD-202,

Method 210, Condition D, “Resistance to Soldering Heat”

test

STANDARD ELECTRICAL SPECIFICATIONS

RESISTOR

PACKAGE

VISHAY DALE

MODEL/

PINS NO

RESISTANCE

RANGE

STANDARD

TOLERANCE

ꢀ

TEMPERATURE

COEFFICIENT

(- 55 °C to + 125 °C)

POWER RATING POWER RATING

WEIGHT

SCHEMATIC

MAX. at 70 °C

MDM 14

MDM 16

0.10

0.20

0.05

0.10

0.20

0.05

1.30

1.40

1.20

1.50

1.60

1.40

10 - 1M

Consult factory

10 - 1M

Consult factory

2 ( 1, 5ꢁ ^(2ꢁ

K, M ^(1ꢁ

1.3

1.5

Notes

(1ꢁ

(2ꢁ

K = 100 ppmꢀ/C; M = 300 ppmꢀ/C

1 % and 5 % tolerances available on request

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: M8340101M2201GBD04 (preferred part numbering format)

CHARACTERISTIC

VALUE

MIL STYLE

SPEC SHEET

RESISTANCE

TOLERANCE

SCHEMATIC

PACKAGING

M83401

01 = 14 Pin

02 = 16 Pin

K = 100 ppm

M = 300 ppm

3 digit significant

figure, followed

by a multiplier

10R0 = 10 Ω

F = 1 %

G = 2 %

J = 5 %

A = Isolated

B = Bussed

D04 = TinꢀLead, Tube

DSL = TinꢀLead, Tube,

Single Lot Date Code

3302 = 33 kΩ

1004 = 1 MΩ

Historical Part Number example: M8340101M2201GB (will continue to be accepted)

2201

D04

M83401

RESISTANCE

VALUE

PACKAGING

SCHEMATIC

MIL STYLE

SPEC SHEET

CHARACTERISTIC

TOLERANCE

New Global Part Numbering: M8340102KA001GJD04 (preferred part numbering format)

RESISTANCE

VALUE

MIL STYLE

SPEC SHEET CHARACTERISTIC

TOLERANCE

SCHEMATIC

PACKAGING

Per std. Mil. Spec

(see Impedence

codes tableꢁ

F = 1 %

G = 2 %

J = 5 %

M83401

01 = 14 Pin

02 = 16 Pin

K = 100 ppm

M = 300 ppm

J = Dual

Terminator

D04 = TinꢀLead, Tube

DSL = TinꢀLead, Tube,

Single Lot Date Code

Historical Part Number example: M8340102KA001GJ (will continue to be accepted)

D04

M83401

A001

RESISTANCE

VALUE

SPEC SHEET

TOLERANCE

MIL STYLE

CHARACTERISTIC

SCHEMATIC

PACKAGING

www.vishay.com

For technical questions, contact: ff2aresistors@vishay.com

Document Number: 31516

Revision: 08-Jul-08

MDM (Military M83401)

Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified,

Vishay Dale

Type RZ Dual-In-Line Package, 01, 03, 05 Schematics

DIMENSIONS in inches [millimeters]

0.310 0.010

[7.87 0.254]

TYP 0.030

[0.762]

0.010 [0.254]

0.250 0.005

[6.35 0.127]

0.120 0.005

[3.05 0.127]

Pin #1

0.130 + 0.015

- 0.005

[3.30 + 0.381

- 0.127]

Identification

0.010 + 0.005

- 0.002

[0.254 + 0.127

- 0.051]

Pin #1

0.075 0.015

[1.91 0.381]

0.018 0.003

[0.457 0.076]

0.290 Min.

0.320 Nom.

0.360 Max.

[7.37 Min.

8.13 Nom.

9.14 Max.]

0.100 0.010

[2.54 0.254]

Non-Accumulative Tol.

"C" Spaces

0.010 [0.254]

0.050 0.005

[1.27 0.127]

VISHAY DALE MODEL

MDM14

0.750 [19.05]

0.850 [21.59]

0.600 [15.24]

0.700 [17.78]

MDM16

IMPEDANCE CODES

R₁(Ω)

R₂(Ω)

R₁(Ω)

330

1.5K

R₂(Ω)

CODE

A001

A002

A003

A004

A005

A006

A007

A008

A009

CODE

130

200

210

260

240

390

270

330

390

A010

A011

A012

A013

A014

A015

A016

A017

A018

470

680

120

130

160

180

220

330

3.3K

6.2K

270

180

270

560

620

270

560

1.2K

2.7K

TECHNICAL SPECIFICATIONS

PARAMETER

UNIT

MDM SERIES

100

Maximum Operating Voltage

Voltage Coefficient of Resistance

Dielectric Strength

V_DC

V_eff

V_AC

< 50 ppm

200 per min.

10 000 M

Insulation Resistance

Operating Temperature Range

Storage Temperature Range

- 55 to + 125

- 55 to + 150

MECHANICAL SPECIFICATIONS

Marking Resistance to Solvents

Permanency testing per MIL-PRF-83401

Per MIL-PRF-83401

Solderability

Body

Molded epoxy

Terminals

Copper alloy, hot-solder dipped

Document Number: 31516

Revision: 08-Jul-08

For technical questions, contact: ff2aresistors@vishay.com

www.vishay.com

MDM (Military M83401)

Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified,

Vishay Dale

Type RZ Dual-In-Line Package, 01, 03, 05 Schematics

CIRCUIT APPLICATIONS

01 SCHEMATIC

MDM1401 (M8340101xxxxxxB)

MDM1601 (M8340102xxxxxxB)

13 or 15 resistors with one pin common

The MDMxx01 provides the user with a choice of 13 or 15 nominally

equal resistors, each connected to a common pin. Commonly used in

the following applications:

• •

• • • • •

•

• MOSꢀROM Pull-upꢀPull-down

• Open Collector Pull-up

• “Wired OR” Pull-up

• TTL Input Pull-down

MDM1401

MDM1601

• Digital Pulse Squaring

• TTL Unused Gate Pull-up

• High Speed Parallel Pull-up

Pin #1

• Power Driven Pull-up

03 SCHEMATIC

MDM1403 (M8340101xxxxxxA)

MDM1603 (M8340102xxxxxxA)

7 or 8 isolated resistors

The MDMxx03 provides the user with a choice of 7 or 8 nominally

equal resistors, with each resistor isolated from all others. Commonly

used in the following applications:

• “Wired OR” Pull-up

• Power Driven Pull-up

• Power Gate Pull-up

• Line Termination

• Long-line Impedance Balancing

• LED Current Limiting

• ECL Output Pull-down

• TTL Input Pull-down

MDM1403

MDM1603

Pin #1

05 SCHEMATIC

MDM1405 (M8340101xxxxxxJ)

MDM1605 (M8340102xxxxxxJ)

R2 R2

12 or 14 resistor pairs

The MDMxx05 provides the user with a choice of 12 or 14 pairs of

R1ꢀR2 resistor values for pulse squaring and TTL dual-line

terminating requirements.

MDM1405, MDM1605

Pin #1

CAGE CODE: 91637

01 Schematic

03 Schematic

05 Schematic

MDM 16

1.60

1.40

MDM 16

1.50

MDM 16

MDM 14

1.40

MDM 14

1.30

MDM 14

1.20

1.00

Single Resistor

0.20

Single Resistor

0.10

0.05

- 55

+ 25

+ 70

+ 125 + 150

- 55

+ 25

+ 70

+ 125 + 150

- 55

+ 25

+ 70

+ 125 + 150

Derating

Ambient Temperature °C

www.vishay.com

For technical questions, contact: ff2aresistors@vishay.com

Document Number: 31516

Revision: 08-Jul-08

MDM (Military M83401)

Thick Film Resistor Networks Military, MIL-PRF-83401 Qualified,

Vishay Dale

Type RZ Dual-In-Line Package, 01, 03, 05 Schematics

PERFORMANCE

TEST

CONDITIONS

MAX. ΔR (Typical Test Lots)

0.50 % ΔR

1.5 x rated power, applied 1.5 h “ON” and 0.5 h “OFF”

for 100 h 4 h at + 25 /C ambient temperature

Power Conditioning

Thermal Shock

5 cycles between - 65 /C and + 125 /C

2.5 x rated working voltage for 5 s

0.50 % ΔR

0.25 % ΔR (Char. Kꢁ

0.50 % ΔR (Char. Mꢁ

Short Time Overload

0.25 % ΔR (Char. Kꢁ

0.50 % ΔR (Char. Mꢁ

Low Temperature Operation

Moisture Resistance

Resistance to Soldering Heat

Shock

45 min at full rated working voltage at - 65 /C

240 h with humidity ranging from 80 % RH to 98 % RH

Leads immersed in + 260 /C solder to within 1ꢀ16" of body for 10 s

Total of 18 shocks at 100 G's

0.50 % ΔR

0.25 % ΔR

Vibration

12 h at maximum of 20 G's between 10 and 2000 Hz

1000 h at + 70 /C, rated power applied 1.5 h “ON”,

0.5 h “OFF” for full 1000 h period

0.50 % ΔR (Char. Kꢁ

2.00 % ΔR (Char. Mꢁ

Load Life

Terminal Strength

Insulation Resistance

4.5 pound pull for 30 s

0.25 % ΔR

10 000 MΩ (minimumꢁ

Dielectric Withstanding Voltage No evidence of arcing or damage (200 V_RMSfor 1 minꢁ

Document Number: 31516

Revision: 08-Jul-08

For technical questions, contact: ff2aresistors@vishay.com

www.vishay.com

Legal Disclaimer Notice

Vishay

Disclaimer

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf

(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein

or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any

information provided herein to the maximum extent permitted by law. The product specifications do not expand or

otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed

therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this

document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless

otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such

applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting

from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding

products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000

Revision: 18-Jul-08

www.vishay.com

相关型号：