M8340101K1960FA [VISHAY]
RESISTOR, NETWORK, FILM, ISOLATED, 0.1 W, THROUGH HOLE MOUNT, DIP;
| 型号： | M8340101K1960FA |
| 厂家： | 
VISHAY |
| 描述： | RESISTOR, NETWORK, FILM, ISOLATED, 0.1 W, THROUGH HOLE MOUNT, DIP |
| 文件： | 总4页 (文件大小：129K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
QPL Networks
Vishay Foil Resistors
Bulk Metal® Foil Technology
1445Q-14 Pin and 1446Q-16 Pin DIP Packages
FEATURES
• Hermetically Sealed for maximum environmental
protection - 100% leak protection
Product may not
be to scale
Gross Leak: No bubbles
Fine Leak: < 5 x 10–7 cc/sec
(MIL-STD-220, Method 112, Test C, Procedure 111A)
• Tested per MIL-PRF-83401
• Ceramic Package: 94% Alumina (Al2O3)
• Lid: Gold plated Kovar
Vishay Models 1445Q and 1446Q networks are qualified to
MIL-PRF-83401, Characteristic C, Schematic A. Actual
performance exceeds all the requirements of MIL-PRF-83401
characteristics "C."
• Solder: Tin/Gold
• Leads: Alloy 42 (Iron Nickel) with 100µ Inches gold plating
(MIL-STD-1276, Type G-21-A)
Model 1445Q contains 7 resistors and 1446Q contains 8 resistors.
Qualified resistance range is 100 ohms through 10Kohms. Other
values are available non-QPL. Power rating is 0.1 Watt.
• Gold ball wire bonding
• Foil Chips V15X5
FIGURE 1 - MODEL 1445Q DIMENSIONS
0.740 ±0.045
(18.80 ±1.14)
0.008 –0.016
(0.20 –0.41)
ADDITIONAL TESTING TO MIL SPEC
Group A testing to MIL-PRF-83401 imposes the following:
0.270 +0.035/–0.030
(6.86 +0.89/–0.76)
0.300 ±0.010
(7.62 ±0.25)
1. Thermal shock 100%
5X from – 65 to + 125C.
NO. 1 LEAD
(VIEWED FROM TOP)
2. Power conditioning 100%
0.040 - 0.070
(1.01 - 1.78)
TYPICAL
2. 1 100 hours at 25C, full power.
2. 2 ∆R and ∆ ratio calculation.
0.200
(5.08)
MAXIMUM
3. Visual and Mechanical after the above tests (sample plan)
3. 1 Conformity to physical size.
3. 2 Workmanship
0.135 +0.015/–0.010
(3.43 +0.38/–0.25)
0.015 –0.022
(0.38 –0.56)
0.100
(2.54)
TYP.
3. 3 Damage due to the above tests.
4. 10% PDA or one piece whichever is greater.
5. Solderability (sample plan).
FIGURE 2 - MODEL 1446Q DIMENSIONS
+ 0.046
0.830
- 0.070
+ 1.17
(21.08
)
0.008 –0.016
(0.20 –0.41)
- 1.78
+ 0.035
- 0.030
0.270
(6.86
0.300 ±0.010
(7.62 ±0 .25)
+ 0.89
)
- 0.76
Group B sample testing to MIL-PRF-83401 imposes the following:
1. Temperature Coefficient of Resistance (sample plan).
2. Resistance to solvents (sample plan).
(VIEWED FROM TOP)
NO. 1 LEAD
0.040 –0.070
TYPICAL
(1.01 –1.78)
0.200
(5.08)
MAXIMUM
0.135 +0.015/ –0.010
(3.43 +0.38/–0.25)
0.100
(2.54)
0.015 –0.022
TYPICAL
(0.38 –0.56)
SALES
• ISRAEL: foilsales.israel@vishay.com
• ASIA/JAPAN: foilsales.asia@vishay.com • UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com • GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com
• FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com
• AMERICAS: foilsales.usa@vishay.com
For technical questions in the Americas, contact foilsupport1@vishay.com
For technical questions in Asia/Japan/Europe/Africa/Israel, contact foilsupport2@vishay.com
www.vishay.com
116
Document Number: 63031
Revision 08-Mar-05
QPL Networks
Vishay Foil Resistors
Bulk Metal® Foil Technology
1445Q-14 Pin and 1446Q-16 Pin DIP Packages
TABLE 1 - TCR CHARACTERISTIC
FIGURE 3 - SCHEMATIC “A”
TABLE 2 - RESISTANCE VALUE
Qualification to Characteristic “C” allows Vishay
to supply to the following characteristics*
N-1
N
A four digit designator in
which the first three digits
are significant figures and
the fourth digit indicates
the number of zeros to
follow.
CHARAC-
TCR
TCR
SEAL
TERISTIC ABSOLUTE TRACK
C
V
H
K
M
± 50
± 50
± 5
Hermetic
± 5 Non-Hermetic
N.A. Non-Hermetic
N.A. Non-Hermetic
N.A. Non-Hermetic
± 50
± 100
± 300
1
2
3
For Model: /01 N = 7
/02 N = 8
Example: 1002 = 10K
*For characteristics H, K and M the “C”
power rating must be acceptable.
TABLE 3 - MIL-PRF-83401 PERFORMANCE SPECIFICATIONS
MIL-PRF-83401
TEST OR CONDITION
Y
R
C
V
H
K
M
Resistance Temp Characteristic
ppm/°C
ppm/°C
± 5
± 5
± 25
± 50
± 50
± 50
± 100
± 300
Tracking To Reference Element
(- 55 to + 125°C)
± 5
± 5
± 5
NA
NA
NA
Max Ambient Temp at Rated Wattage
Max Ambient Temp at Zero Power
Thermal Shock and Power Conditioning
+ 70°C
+ 125°C
± 0.02% ± 0.08% ± 0.25% ± 0.25% ± 0.50% ± 0.70% ± 0.70%
± 0.01% ± 0.04% ± 0.03% ± 0.03% NA NA NA
Low Temperature Operation
Short Time Overload
∆R
± 0.02% ± 0.03% ± 0.10% ± 0.10% ± 0.10% ± 0.25% ± 0.50%
± 0.02% ± 0.02% ± 0.02% ± 0.02% NA NA NA
∆Ratio
∆R
± 0.02% ± 0.03% ± 0.10% ± 0.10% ± 0.10% ± 0.25% ± 0.50%
± 0.01% ± 0.02% ± 0.02% ± 0.02% NA NA NA
∆Ratio
Terminal Strength
∆R
± 0.01% ± 0.03% ± 0.10% ± 0.10% ± 0.25% ± 0.25% ± 0.25%
± 0.01% ± 0.02% ± 0.03% ± 0.03% NA NA NA
∆Ratio
Resistance to Soldering Heat
Moisture Resistance
∆R
± 0.01% ± 0.05% ± 0.10% ± 0.10% ± 0.10% ± 0.25% ± 0.25%
± 0.01% ± 0.02% ± 0.02% ± 0.02% NA NA NA
∆Ratio
∆R
± 0.02% ± 0.05% ± 0.20% ± 0.20% ± 0.40% ± 0.50% ± 0.50%
± 0.01% ± 0.02% ± 0.02% ± 0.02% NA NA NA
∆Ratio
Shock (Specified Pulse)
Vibration, High Frequency
∆R
± 0.02% ± 0.03% ± 0.25% ± 0.25% ± 0.25% ± 0.25% ± 0.25%
± 0.02% ± 0.02% ± 0.03% ± 0.03% NA NA NA
∆Ratio
∆R
± 0.02% ± 0.03% ± 0.25% ± 0.25% ± 0.25% ± 0.25% ± 0.25%
± 0.02% ± 0.02% ± 0.03% ± 0.03% NA NA NA
∆Ratio
Load Life
(+ 70°C, Full Power, 1,000 Hours)
∆R
± 0.05% ± 0.1%
± 0.10% ± 0.10% ± 0.50% ± 0.50% ± 2.00%
∆Ratio
± 0.025% ± 0.03% ± 0.03% ± 0.03% NA NA NA
+ 25°C Power Rating
∆R
± 0.05% ± 0.1%
± 0.10% ± 0.10% ± 0.50% ± 0.50% ± 2.00%
(1,000 hrs.)
∆Ratio
± 0.025% ± 0.03% ± 0.03% ± 0.03% NA NA NA
High Temperature Exposure
(+ 125°C, 100 Hours)
∆R
± 0.02% ± 0.05% ± 0.10% ± 0.10% ± 0.20% ± 0.50% ± 1.00%
± 0.01% ± 0.02% ± 0.03% ± 0.03% NA NA NA
∆Ratio
Low Temperature Storage
∆R
± 0.01% ± 0.03% ± 0.10% ± 0.10% ± 0.10% ± 0.25% ± 0.50%
∆Ratio
± 0.01% ± 0.02% ± 0.02% ± 0.02% NA
NA
NA
Insulation Resistance
10,000MΩ
Resistance Tolerance and,
when applicable,
Resistance Ratio Accuracy
± 0.005(V) ± 0.05(A) ± 0.1%(B) ± 0.1%(B) ± 0.1%(B) ± 0.5%(D) ± 1.0%(F)
± 0.01(T)
± 0.1(B)
± 0.5%(D) ± 0.5%(D) ± 0.5%(D) ± 1.0%(F) ± 2.0%(G)
± 1.0%(F) ± 1.0%(F) ± 1.0%(F) ± 2.0%(G) ± 5.0%(J)
± 0.05(A) ± 0.5(D)
± 0.1(B)
± 0.5(D)
± 1.0(F)
1. ∆R's are not cumulative. For purposes of determining reliability calculations, consider the characteristics shown as figures of merit and
allow no more than ± 0.05% ∆R lifetime. Allow proportionately less if the severity of anticipated environmental stress is small compared to
the tests as defined in MIL-PRF-83401.
SALES
• ISRAEL: foilsales.israel@vishay.com
• FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com
• AMERICAS: foilsales.usa@vishay.com
• ASIA/JAPAN: foilsales.asia@vishay.com • UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com • GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com
For technical questions in the Americas, contact foilsupport1@vishay.com
For technical questions in Asia/Japan/Europe/Africa/Israel, contact foilsupport2@vishay.com
Document Number: 63031
Revision 08-Mar-05
www.vishay.com
117
QPL Networks
Vishay Foil Resistors
Bulk Metal® Foil Technology
1445Q-14 Pin and 1446Q-16 Pin DIP Packages
TABLE 4 - ORDERING INFORMATION - VISHAY QUALIFIED M83401 SERIES (MIL-PRF-83401) NETWORKS
M83401
01
C
1002
B
A
MILITARY
SPECIFICATION
SLASH
SHEET
TCR
RESISTANCE
VALUE
RESISTANCE
TOLERANCE
SCHEMATIC**
CHARACTERISTIC
Vishay is qualified
to the following
slash sheets:
Vishay is qualified
to Characteristic C
(see Table 1)
Vishay is qualified
from 100Ω through
10KΩ.
Vishay is qualified
to the following
tolerances:
Vishay is quali-
fied to schematic
“A”.
MIL-PRF-83401
(see Table 2)
(see Figure 3)
/01 14pin DIP,Vishay
P/N 1445Q
B = 0.1%
D = 0.5%*
F = 1.0%*
G = 2.0%
J = 5.0%
/02 16 pin DIP,Vishay
P/N 1446Q
*
For standard values by tolerance see Table III of MIL-PRF-83401.
All values are considered standard when the specified tolerance is tighter than 0.10%.
**
What to do if QPL is required and no schematic is available:
Schematic "X" –
Additional special schematics may be identified as "X"
schematic and described fully in the detailed specifications.
DSCC Drawings – Anyone can request DSCC Drawings if the part is to be used
on a military contract. Submit either a catalog sheet or SCD
to DSCC or call Vishay for more information.
*** Hot solder dip leads are available upon request
EXAMPLES:
14 Pin, 7 Resistor, 10K000, 0.1% Tolerance —
M83401
01
C
1002
B
A
MILITARY
SPECIFICATION
SLASH
SHEET
TCR
RESISTANCE
VALUE
RESISTANCE
TOLERANCE
SCHEMATIC
CHARACTERISTIC
16 Pin, 8 Resistor, 100R00, 0.1% Tolerance —
M83401
02
C
1000
F
A
MILITARY
SPECIFICATION
SLASH
SHEET
TCR
RESISTANCE
VALUE
RESISTANCE
TOLERANCE
SCHEMATIC
CHARACTERISTIC
SALES
• ISRAEL: foilsales.israel@vishay.com
• ASIA/JAPAN: foilsales.asia@vishay.com • UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com • GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com
• FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com
• AMERICAS: foilsales.usa@vishay.com
For technical questions in the Americas, contact foilsupport1@vishay.com
For technical questions in Asia/Japan/Europe/Africa/Israel, contact foilsupport2@vishay.com
www.vishay.com
118
Document Number: 63031
Revision 08-Mar-05
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号：
M8340101K2102FA
Array/Network Resistor, Isolated, Metal Glaze/thick Film, 1.4W, 100V, 1% +/-Tol, 100ppm/Cel, Through Hole Mount, DIP
VISHAY
M8340101K2103FB
Array/Network Resistor, Bussed, Metal Glaze/thick Film, 1.3W, 100V, 1% +/-Tol, 100ppm/Cel, Through Hole Mount, DIP
VISHAY
M8340101K2202JB
Array/Network Resistor, Bussed, Metal Glaze/thick Film, 1.3W, 100V, 5% +/-Tol, 100ppm/Cel, Through Hole Mount, DIP
VISHAY
©2020 ICPDF网 联系我们和版权申明