MCT0603MD1332BPW00 [VISHAY]

RESISTOR, THIN FILM, 0.125 W, 0.1 %, 25 ppm, 13300 ohm, SURFACE MOUNT, 0603, CHIP, ROHS COMPLIANT;


型号：	MCT0603MD1332BPW00
厂家：	VISHAY
描述：	RESISTOR, THIN FILM, 0.125 W, 0.1 %, 25 ppm, 13300 ohm, SURFACE MOUNT, 0603, CHIP, ROHS COMPLIANT 电阻器
文件：	总9页 (文件大小：161K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision

Vishay Beyschlag

Precision Thin Film Chip Resistor

Superior Moisture Resistivity

FEATURES

• Superior moisture resistivity, |ΔR/R| < 0.5 %

(85 °C; 85 % RH; 1000 h)

• Rated dissipation P₇₀up to 0.4 W for size 1206

• AEC-Q200 qualified

• Approved according to EN 140401-801

• Lead (Pb)-free solder contacts

• Compliant to RoHS directive 2002/95/EC

APPLICATIONS

• Automotive

• Telecommunication

• Medical equipment

• Industrial equipment

Automotive-Grade MC AT Precision Thin Film Chip

Resistors are the perfect choice for most fields of modern

precision electronics where reliability and stability is of major

concern. Typical applications include automotive,

telecommunication, industrial, medical equipment, precision

test and measuring equipment.

METRIC SIZE

INCH:

0603

0805

1206

METRIC:

RR 1608M

RR 2012M

RR 3216M

TECHNICAL SPECIFICATIONS

DESCRIPTION

MCT 0603 AT

RR 1608M

MCU 0805 AT

RR 2012M

47 Ω to 100 kΩ

0.1 %

MCA 1206 AT

Metric size

RR 3216M

Resistance range

Resistance tolerance

Temperature coefficient

47 Ω to 100 kΩ

25 ppm/K; 15 ppm/K

0.200 W

(1)

Rated dissipation P₇₀

0.125 W

75 V

0.400 W

200 V

Operating voltage, U_max.AC/DC

Permissible film temperature ⁽¹⁾

Insulation voltage

150 V

155 °C

1 min; U_ins

Continuous

100 V

75 V

200 V

75 V

300 V

75 V

Note

(1)

Please refer to APPLICATION INFORMATION below

www.vishay.com

For technical questions, contact: filmresistors.thinfilmchip@vishay.com

Document Number: 28785

Revision: 09-Apr-09

MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision

Precision Thin Film Chip Resistor

Vishay Beyschlag

Superior Moisture Resistivity

APPLICATION INFORMATION

The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow support

of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not

exceeded. Furthermore, a high level of ambient temperature or of power dissipation may raise the temperature of the solder joint,

hence special solder alloys or board materials may be required to maintain the reliability of the assembly.

These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift

increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a

functional lifetime. The designer may estimate the performance of the particular resistor application or set certain load and

temperature limits in order to maintain a desired stability.

MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION

Operation mode

Standard

Power

P₇₀

Rated dissipation

P₇₀

MCT 0603 AT

MCU 0805 AT

MCA 1206 AT

0.100 W

0.125 W

0.250 W

125 °C

0.125 W

0.200 W

0.400 W

155 °C

Film temperature

Max. resistance change at rated dissipation for

resistance range:

MCT 0603 AT

47 Ω to 100 kΩ

MCU 0805 AT

MCA 1206 AT

|ΔR/R| max., after:

1000 h

8000 h

≤ 0.1 %

≤ 0.2 %

≤ 0.6 %

≤ 0.2 %

≤ 0.4 %

225 000 h

Document Number: 28785

Revision: 09-Apr-09

For technical questions, contact: filmresistors.thinfilmchip@vishay.com

www.vishay.com

MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision

Precision Thin Film Chip Resistor

Vishay Beyschlag

Superior Moisture Resistivity

PART NUMBER AND PRODUCT DESCRIPTION ⁽¹⁾

PART NUMBER: MCT0603MD4641BPW00

MODEL/SIZE

VERSION

TCR

VALUE

TOLERANCE

PACKAGING

SPECIAL

MCT0603

MCU0805

MCA1206

M = AT

(Automotive)

15 ppm/K

25 ppm/K

3 digit value

1 digit

B = 0.1 %

Up to 2 digits

00 = Standard

multiplier

MULTIPLIER

0 = *10⁰

1 = *10¹

2 = *10²

3 = *10³

PRODUCT DESCRIPTION: MCT 0603 - 25 0.1 % AT PW 4K64

0603

- 25

0.1 %

MCT

4K64

TOLERANCE

VALUE

RESISTANCE

VALUE

MODEL

SIZE

TCR

VERSION

PACKAGING

MCT

MCU

MCA

0603

0805

1206

15 ppm/K

25 ppm/K

0.1 %

AT = Automotive

47K = 47 kΩ

Note

(1)

Products can be ordered using either the PART NUMBER or PRODUCT DESCRIPTION

TEMPERATURE COEFFICIENT AND RESISTANCE RANGE

DESCRIPTION

RESISTANCE VALUE ⁽²⁾

TCR

25 ppm/K

15 ppm/K

Note

TOLERANCE

MCT 0603 AT

MCU 0805 AT

MCA 1206 AT

47 Ω to 100 kΩ

0.1 %

47 Ω to 100 kΩ

(2)

Resistance values to be selected from E96 and E192

PACKAGING

REEL

MODEL

PIECES/

PAPER TAPE ON REEL

CODE

1000

5000

MCT 0603 AT

20 000

1000

MCU 0805 AT

MCA 1206 AT

5000

20 000

1000

5000

www.vishay.com

For technical questions, contact: filmresistors.thinfilmchip@vishay.com

Document Number: 28785

Revision: 09-Apr-09

MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision

Precision Thin Film Chip Resistor

Vishay Beyschlag

Superior Moisture Resistivity

DIMENSIONS

T₁

W_T

T₂

DIMENSIONS AND MASS

(mm)

W_T

(mm)

T₁

(mm)

T₂

(mm)

MASS

(mg)

TYPE

(mm)

MCT 0603 AT 0.45 + 0.1/- 0.05

1.55 0.05

2.0 0.1

0.85 0.1

> 75 % of W

0.3 + 0.15/- 0.2

0.4 + 0.1/- 0.2

0.5 0.25

0.3 + 0.15/- 0.2

0.4 + 0.1/- 0.2

0.5 0.25

1.9

4.6

9.2

MCU 0805 AT

MCA 1206 AT

0.52 0.1

0.55 0.1

1.25 0.15

1.6 0.15

3.2 + 0.1/- 0.2

SOLDER PAD DIMENSIONS

RECOMMENDED SOLDER PAD DIMENSIONS

WAVE SOLDERING

REFLOW SOLDERING

TYPE

(mm)

MCT 0603 AT

MCU 0805 AT

MCA 1206 AT

0.5

0.65

1.5

1.2

1.4

1.6

1.1

1.5

1.9

2.9

0.5

0.65

1.5

0.95

1.1

0.95

1.4

2.4

2.85

4.0

3.45

4.7

1.25

1.75

Note

• The rated dissipation applies only if the permitted film temperature is not exceeded. Furthermore, a high level of ambient temperature or of

power dissipation may raise the temperature of the solder joint, hence special solder alloys or boardmaterials may be required to maintain the

reliability of the assembly. Specified power rating above 125 °C requires dedicated heat-sink pads, which depend on boardmaterials.

The given solder pad dimensions reflect the considerations for board design and assembly as outlined e.g. in standards IEC 61188-5-x, or in

publication IPC-7351. They do not guarantee any supposed thermal properties, particularly as these are also strongly influenced by many other

parameters.

Still, the given solder pad dimensions will be found adequate for most general applications, e.g. those referring to “standard operation mode”.

Please note however that applications for “power operation mode” require special considerations for the design of solder pads and adjacent

conductor areas.

Document Number: 28785

Revision: 09-Apr-09

For technical questions, contact: filmresistors.thinfilmchip@vishay.com

www.vishay.com

MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision

Precision Thin Film Chip Resistor

Vishay Beyschlag

Superior Moisture Resistivity

DESCRIPTION

APPROVALS

Production is strictly controlled and follows an extensive

The resistors are approved within the IECQ-CECC Quality

Assessment System for Electronic Components to the detail

specification EN 140401-801 which refers to EN 60115-1,

EN 140400 and the variety of environmental test procedures

of the IEC 60068 ⁽³⁾series. The detail specification refers to

the climatic categories 55/125/56, which relates to the

“standard operation mode” of this datasheet.

set of instructions established for reproducibility.

homogeneous film of special metal alloy is deposited on a

high grade (Al₂O₃) ceramic substrate and conditioned to

achieve the desired temperature coefficient. Specially

designed inner contacts are deposited on both sides. A

special laser is used to achieve the target value by smoothly

cutting a meander groove in the resistive layer without

damaging the ceramics. The resistor elements are covered

by a unique protective coating designed for electrical,

mechanical and climatic protection. The terminations receive

a final pure tin on nickel plating.

Conformity is attested by the use of the CECC Logo ( ) as

the Mark of Conformity on the package label.

Vishay BEYSCHLAG has achieved “Approval of

Manufacturer” in accordance with IEC QC 001002-3,

clause 2. The release certificate for “Technology Approval

Schedule” in accordance with CECC 240001 based on

The result of the determined production is verified by an

extensive testing procedure and optical inspection

performed on 100 % of the individual chip resistors. Only

accepted products are laid directly into the paper tape in

IEC QC 001002-3, clause

is granted for the

Vishay BEYSCHLAG manufacturing process.

accordance with IEC 60286-3 ⁽³⁾

The resistors are qualified according to AEC-Q200.

RELATED PRODUCTS

ASSEMBLY

For more information about products with higher operation

temperature please refer to the professional datasheet

document no. 28760.

The resistors are suitable for processing on automatic SMD

assembly systems. They are suitable for automatic soldering

using wave, reflow or vapour phase as shown in

IEC 61760-1 ⁽³⁾. The encapsulation is resistant to all cleaning

solvents commonly used in the electronics industry,

including alcohols, esters and aqueous solutions. The

suitability of conformal coatings, if applied, shall be qualified

by appropriate means to ensure the long-term stability of the

whole system.

Chip resistor arrays may be used in sensing applications or

precision amplifiers where close matching between multiple

resistors is necessary. Please refer to the

ACAS AT - Precision datasheet document no. 28770.

The resistors are RoHS compliant; the pure tin plating

provides compatibility with lead (Pb)-free and

lead-containing soldering processes. Solderability is

specified for 2 years after production or requalification. The

permitted storage time is 20 years. The immunity of the

plating against tin whisker growth has been proven under

extensive testing.

(1)

All products comply with the GADSL

CEFIC-EECA-EICTA

and the

(2)

list of legal restrictions on

hazardous substances. This includes full compliance with

the following directives:

• 2000/53/EC End of Vehicle life Directive (ELV) and

Annex II (ELV II)

• 2002/95/EC Restriction of the use of Hazardous

Substances directive (RoHS)

• 2002/96/EC Waste Electrical and Electronic Equipment

Directive (WEEE)

Notes

(1)

Global Automotive Declarable Substance List, see www.gadsl.org

(2)

CEFIC (European Chemical Industry Council), EECA (European Electronic Component Manufacturers Association), EICTA (European trade

organisation representing the information and communications technology and consumer electronics), see www.eicta.org → issues →

environment policy → chemicals → chemicals for electronics

(3)

The quoted IEC standards are also released as EN standards with the same number and identical contents

www.vishay.com

For technical questions, contact: filmresistors.thinfilmchip@vishay.com

Document Number: 28785

Revision: 09-Apr-09

MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision

Precision Thin Film Chip Resistor

Vishay Beyschlag

Superior Moisture Resistivity

FUNCTIONAL PERFORMANCE

Standard Mode

Power Mode

100

- 55

100

125

155

180

Ambient Temperature in °C

For permissible resistance change please refer to table MAXIMUM RESISTANCE CHANGE AT RATED POWER, above

Derating

MCT 0603 AT

MCU 0805 AT

MCA 1206 AT

µV/V

0.1

0.01

100

1 k

10 k

100 kΩ

1 MΩ

Resistance Value

Current noise A₁in accordance with IEC 60195

Current Noise

TESTS AND REQUIREMENTS

All tests are carried out in accordance with the following

specifications:

category temperature; damp heat, long term, 56 days) is

valid (LCT = - 55 °C/UCT = 125 °C).

EN 60115-1, generic specification

EN 140400, sectional specification

EN 140401-801, detail specification

Unless otherwise specified the following values apply:

Temperature: 15 °C to 35 °C

Relative humidity: 45 % to 75 %

The components are approved in accordance with the

IECQ-CECC-system, where applicable. The following table

contains only the most important tests. For the full test

schedule refer to the documents listed above. The testing

also covers most of the requirements specified by

EIA/IS-703 and JIS-C-5202.

Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).

The components are mounted for testing on boards in

accordance with EN 140400, 2.3.3 unless otherwise

specified.

The requirements stated in the Test Procedures and

Requirements table are based on the required tests and

permitted limits of EN 140401-801. However, some

additional tests and a number of improvements against those

minimum requirements have been included.

The tests are carried out in accordance with IEC 60068 and

under standard atmospheric conditions in accordance with

IEC 60068-1, 5.3. Climatic category LCT/UCT/56 (rated

temperature range: Lower category temperature, upper

Document Number: 28785

Revision: 09-Apr-09

For technical questions, contact: filmresistors.thinfilmchip@vishay.com

www.vishay.com

MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision

Precision Thin Film Chip Resistor

Vishay Beyschlag

Superior Moisture Resistivity

TEST PROCEDURES AND REQUIREMENTS

IEC

60068-2

TEST

REQUIREMENTS

PERMISSIBLE CHANGE (ΔR)

60115-1

CLAUSE

TEST

PROCEDURE

STABILITY CLASS 0.25 OR BETTER ⁽¹⁾

METHOD

Stability for product types:

MCT 0603 AT

47 Ω to 100 kΩ

0.1 % R

MCU 0805 AT

MCA 1206 AT

4.5

Resistance

Temperature

coefficient

At (20/- 55/20) °C and

(20/155/20) °C

4.8.4.2

25 ppm/K; 15 ppm/K

U = P₇₀x R or U = U_max.

;

whichever is the less severe;

1.5 h on; 0.5 h off;

70 °C; 1000 h

Endurance at 70 °C:

Standard operation mode

(0.1 % R + 0.02 Ω)

(0.2 % R + 0.02 Ω)

70 °C; 8000 h

4.25.1

U = P₇₀x R or U = U_max.

;

whichever is the less severe;

1.5 h on; 0.5 h off;

70 °C; 1000 h

Endurance at 70 °C:

Power operation mode

(0.2 % R + 0.02 Ω)

(0.4 % R + 0.05 Ω)

70 °C; 8000 h

Endurance at

upper category

temperature

125 °C; 1000 h

155 °C; 1000 h

(0.15 % R + 0.02 Ω)

(0.3 % R + 0.02 Ω)

4.25.3

4.24

Damp heat,

steady state

(40 2) °C; 56 days;

78 (Cab)

(0.1 % R + 0.02 Ω)

(93 3) % RH

(85 2) °C

(85 5) % RH

U = 0.1 x P₇₀x R

≤ 100 V;

Damp heat,

steady state,

accelerated

4.39

67 (Cy)

(0.5 % R + 0.05 Ω)

1000 h

4.23

Climatic sequence:

dry heat

4.23.2

2 (Ba)

125 °C; 16 h

55 °C; 24 h; > 90 % RH;

4.23.3

30 (Db)

damp heat, cyclic

1 cycle

4.23.4

4.23.5

1 (Aa)

13 (M)

cold

- 55 °C; 2 h

(0.25 % R + 0.02 Ω)

low air pressure

8.5 kPa; 2 h; (25 10) °C

55 °C; 5 days > 90 % RH;

4.23.6

4.23.7

30 (Db)

damp heat, cyclic

DC load

5 cycles

U = P₇₀x R ≤ U_max.; 1 min

- 55 °C; 2 h

Storage at low

temperature

1 (Aa)

(0.05 % R + 0.01 Ω)

(0.25 % R + 0.02 Ω)

(0.05 % R + 0.01 Ω)

30 min at - 55 °C and

30 min at 125 °C;

1000 cycles

Rapid change of

temperature

4.19

4.13

14 (Na)

Short time overload;

standard operation mode

U = 2.5 x P₇₀x R

≤ 2 × U_max.; 5 s

Severity no. 4:

U = 10 x P₇₀x R

Single pulse high

voltage overload;

standard operation mode

4.27

(0.25 % R + 0.05 Ω)

≤ 2 x U_max.

;

10 pulses

Note

⁽¹⁾According to the detail specification EN 140401-801 the stability class applies to the category temperatures 85 °C and 125 °C and their

respective test conditions.

www.vishay.com

For technical questions, contact: filmresistors.thinfilmchip@vishay.com

Document Number: 28785

Revision: 09-Apr-09

MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision

Precision Thin Film Chip Resistor

Vishay Beyschlag

Superior Moisture Resistivity

TEST PROCEDURES AND REQUIREMENTS

IEC

60068-2

TEST

REQUIREMENTS

PERMISSIBLE CHANGE (ΔR)

60115-1

CLAUSE

TEST

PROCEDURE

STABILITY CLASS 0.25 OR BETTER ⁽¹⁾

METHOD

Stability for product types:

MCT 0603 AT

47 Ω to 100 kΩ

MCU 0805 AT

MCA 1206 AT

U = 15 x P₇₀x R

Periodic electric

overload;

standard operation mode

≤ 2 x U_max.

;

4.37

4.40

(0.5 % R + 0.05 Ω)

0.1 s on; 2.5 s off;

1000 cycles

IEC 61340-3-1;

3 pos. + 3 neg.

(equivalent to MIL-STD-883,

Method 3015)

ESD

(0.5 % R + 0.05 Ω)

(Electro Static Discharge)

MCT 0603 AT: 1000 V

MCU 0805 AT: 1500 V

MCA 1206 AT: 2000 V

Endurance by sweeping;

10 Hz to 2000 Hz;

no resonance;

(0.05 % R + 0.01 Ω)

no visible damage

4.22

6 (Fc)

Vibration

amplitude ≤ 1.5 mm or

≤ 200 m/s²; 6 h

Solder bath method;

SnPb40; non-activated flux

(215 3) °C; (3 0.3) s

Good tinning (≥ 95 % covered);

no visible damage

4.17.2

58 (Td)

Solderability

Solder bath method;

SnAg3Cu0.5 or SnAg3.5;

non-activated flux;

Good tinning (≥ 95 % covered);

no visible damage

(235 3) °C; (2 0.2) s

Resistance to

soldering heat

Solder bath method;

(260 5) °C; (10 1) s

(0.05 % R + 0.01 Ω)

4.18.2

4.29

58 (Td)

45 (XA)

no visible damage

Component solvent

resistance

Isopropyl alcohol + 50 °C;

No visible damage

method 2

RR 1608M; 9 N

4.32

4.33

21 (Ue₃)

21 (Ue₁)

Shear (adhesion)

RR 2012M and

RR 3216M; 45 N

(0.05 % R + 0.01 Ω)

no visible damage; no open circuit in bent position

Substrate bending

Depth 2 mm, 3 times

4.7

Voltage proof

Flammability

U_RMS= U_ins; (60 5) s

No flashover or breakdown

No burning after 30 s

4.35

Needle flame test; 10 s

Document Number: 28785

Revision: 09-Apr-09

For technical questions, contact: filmresistors.thinfilmchip@vishay.com

www.vishay.com

Legal Disclaimer Notice

Vishay

Disclaimer

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf

(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein

or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any

information provided herein to the maximum extent permitted by law. The product specifications do not expand or

otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed

therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this

document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless

otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such

applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting

from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding

products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000

Revision: 18-Jul-08

www.vishay.com

MCT0603MD1332BPW00 [VISHAY]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E