MCT6-X001 [VISHAY]
Transistor Output Optocoupler, 2-Element, 5300V Isolation, DIP-8;
| 型号： | MCT6-X001 |
| 厂家： | 
VISHAY |
| 描述： | Transistor Output Optocoupler, 2-Element, 5300V Isolation, DIP-8 输出元件 光电 |
| 文件： | 总6页 (文件大小：159K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MCT6
Vishay Semiconductors
Optocoupler, Phototransistor Output, Dual Channel
FEATURES
• Current transfer ratio, 50 % typical
• Leakage current, 1.0 nA typical
• Two isolated channels per package
1
2
3
4
8
7
6
5
A
C
C
A
E
C
C
E
• Compliant to RoHS Directive and in
accordance to WEEE 2002/96/EC
AGENCY APPROVALS
• UL1577, file no. E52744 system code H, double protection
• DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 pending
available with option 1
• CSA 93751
i179073
• BSI IEC 60950; IEC 60065
DESCRIPTION
The MCT6 is a two channel optocoupler for high density
applications. Each channel consists of an optically coupled
pair with a gallium arsenide infrared LED and a silicon NPN
phototransistor. Signal information, including a DC level,
can be transmitted by the device while maintaining a high
degree of electrical isolation between input and output.
The MCT6 is especially designed for driving medium-speed
logic, where it may be used to eliminate troublesome ground
loop and noise problems. It can also be used to replace
relays and transformers in many digital interface
applications, as well as analog applications such as CRT
modulation.
ORDERING INFORMATION
DIP
M
C
T
6
-
X
0
0
#
T
PART NUMBER
PACKAGE OPTION
TAPE AND
REEL
7.62 mm
Option 7
Option 9
> 0.1 mm
> 0.7 mm
AGENCY CERTIFIED/PACKAGE
UL, CSA, BSI
CTR
20
DIP-8
MCT6
SMD-8, option 7
SMD-8, option 9
VDE, UL, CSA, BSI
DIP-8
MCT6-X007T (1)
MCT6-X009T (1)
20
MCT6-X001
Notes
•
Additional options may be possible, please contact sales office.
(1)
Also available in tubes, do not put “T” on the end.
Document Number: 83645
Rev. 1.6, 17-May-11
For technical questions, contact: optocoupleranswers@vishay.com
This document is subject to change without notice.
www.vishay.com
1
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MCT6
Vishay Semiconductors
Optocoupler, Phototransistor Output,
Dual Channel
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
Rated forward current, DC
Peak forward current, DC
Power dissipation
Derate linearly from 25 °C
OUTPUT
60
3.0
100
1.3
mA
A
1.0 μs pulse, 300 pps
IFM
Pdiss
mW
mW/°C
Collector current
IC
30
30
mA
V
Collector emitter breakdown voltage
Power dissipation
Derate linearly from 25 °C
COUPLER
BVCEO
Pdiss
150
2.0
mW
mW/°C
Isolation test voltage
VISO
RIO
RIO
5300
M 1012
1011
VRMS
V
IO = 500 V, Tamb = 25 °C
Isolation resistance
V
IO = 500 V, Tamb = 100 °C
Creepage distance
7.0
mm
mm
mW
mW/°C
°C
Clearance distance
7.0
Total package dissipation
Derate linearly from 25 °C
Storage temperature
Ptot
400
5.33
Tstg
- 55 to + 150
- 55 to + 100
10
Operating temperature
Lead soldering time at 260 °C
Tamb
°C
s
Note
•
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
INPUT
Forward voltage
IF = 20 mA
VF
IR
1.25
0.1
25
1.50
10
V
Reverse current
V
R = 3.0 V
μA
pF
Junction capacitance
OUTPUT
VF = 0 V
Cj
Collector emitter breakdown voltage
Emitter collector breakdown voltage
Collector emitter leakage current
Collector emitter capacitance
COUPLER
I
C = 1.0 μA, IE = 10 μA
BVCEO
BVECO
ICEO
30
65
10
V
V
I
C = 10 A, IE = 10 μA
CE = 10 V
CE = 0 V
7.0
V
1.0
8.0
100
nA
pF
V
CCE
Saturation voltage, collector emitter
Capacitance (input to output)
Capacitance between channels
I
C = 2.0 mA, IF = 16 mA
VCEsat
CIO
0.40
V
f = 1.0 MHz
0.5
0.4
pF
pF
f = 1.0 MHz
I
C = 2.0 mA, VCC = 10 V,
Bandwidth
150
kHz
RL = 100
Note
•
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
Document Number: 83645
Rev. 1.6, 17-May-11
For technical questions, contact: optocoupleranswers@vishay.com
This document is subject to change without notice.
www.vishay.com
2
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MCT6
Vishay Semiconductors
Optocoupler, Phototransistor Output,
Dual Channel
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
MAX.
UNIT
DC current transfer ratio
IF = 10 mA, VCE = 10 V
CTRDC
20
50
%
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
UNIT
Switching times, output transistor
I
C = 2.0 mA, RL = 100 , VCE = 5 V
ton, toff
3.0
μs
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
1.5
1.0
0.5
0.0
1.4
1.3
Normalized to:
VCE = 10 V, IF = 10 mA,T = 25 °C
A
Tamb = - 55 °C
Tamb = 25 °C
CTRCE(sat) VCE = 0.4 V
1.2
1.1
T = 50 °C
A
1.0
0.9
Tamb = 85 °C
NCTR(SAT)
NCTR
0.8
0.7
0.1
1
10
100
0.1
1
10
100
I
- Forward Current (mA)
I
- LED Current (mA)
F
F
iilct6_01
iilct6_03
Fig. 1 - Forward Voltage vs. Forward Current
Fig. 3 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
1.5
1.5
Normalized to:
Normalized to:
VCE = 10 V, IF = 10 mA
Tamb = 25 °C
VCE = 10 V,IF = 10 mA
T
= 25 °C
amb
1.0
1.0
CTRCE(sat) VCE = 0.4 V
CTRCE(sat) VCE = 0.4 V
Tamb = 70 °C
0.5
0.0
0.5
NCTR(SAT)
NCTR
NCTR(SAT)
NCTR
0.0
0.1
1
10
100
0.1
1
10
100
I
- LED Current (mA)
I
- LED Current (mA)
F
F
iilct6_02
iilct6_04
Fig. 2 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
Fig. 4 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
www.vishay.com
3
For technical questions, contact: optocoupleranswers@vishay.com
Document Number: 83645
Rev. 1.6, 17-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MCT6
Vishay Semiconductors
Optocoupler, Phototransistor Output,
Dual Channel
1.5
1.0
0.5
0.0
1000
2.5
Normalized to:
CE = 10 V, IF = 10 mA,Tamb= 25 °C
CTRCE(sat) CE = 0.4 V
Tamb = 25 °C, IF = 10 mA
VCC = 5 V, Vth = 1.5 V
V
V
tpHL
100
10
2.0
Tamb = 85 °C
1.5
1.0
tpLH
NCTR(SAT)
NCTR
1
0.1
1
10
100
0.1
1
10
100
R - Collector Load Resistor (kΩ)
I
- LED Current (mA)
L
F
iilct6_05
iilct6_08
Fig. 5 - Normalized Non-Saturated and Saturated CTR vs.
LED Current
Fig. 8 - Propagation Delay vs. Collector Load Resistor
IF
35
30
25
50 °C
20
tPHL
70 °C
15
10
25 °C
tPLH
85 °C
VO
5
0
tS
50 %
0
10
20
30
40
50
60
tF
tD
tR
I - LED Current (mA)
F
iilct6_09
iilct6_06
Fig. 6 - Collector Emitter Current vs. Temperature and LED Current
Fig. 9 - Switching Timing
5
10
4
10
VCC = 5 V
3
10
2
10
IF = 10 mA
Vce = 10 V
1
10
Typical
0
VO
10
- 1
10
f = 10 kHz,
R L = 100 Ω
DF = 50 %
- 2
10
60
80
100
- 20
0
20
40
T
- Ambient Temperature (°C)
amb
iilct6_10
iilct6_07
Fig. 7 - Collector Emitter Leakage Current vs.Temperature
Fig. 10 - Switching Schematic
Document Number: 83645
Rev. 1.6, 17-May-11
For technical questions, contact: optocoupleranswers@vishay.com
This document is subject to change without notice.
www.vishay.com
4
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MCT6
Vishay Semiconductors
Optocoupler, Phototransistor Output,
Dual Channel
PACKAGE DIMENSIONS in millimeters
Pin one ID
4
5
3
6
1
2
7
6.645 0.165
8
ISO method A
9.77 0.14
0.95 0.19
4° typ.
7.62 typ.
0.79
3.555 0.255
0.70 0.19
6.095 0.255
3.045 0.255
1.27
10°
3° to 9°
0.51 0.05
2.54 typ.
0.25 0.05
i178006
Option 7
Option 9
9.53
10.03
7.62 typ.
7.62 ref.
0.7
4.6
4.1
0.102
0.249
8 min.
0.30 typ.
15° max.
0.51
1.02
8.4 min.
10.3 max.
8 min.
0.76
0.76
1.78
R 0.25
R 0.25
2.54
2.54
1.78
1.52
8 min.
11.05
8 min.
11.05
1.52
18450-8
PACKAGE MARKING
MCT6
V WWY H 68
Notes
•
•
•
Only options 1 and 7 reflected in the package marking
The VDE logo is only marked on option 1 parts
Tape and reel suffix (T) is not part of the package marking
www.vishay.com
5
For technical questions, contact: optocoupleranswers@vishay.com
This document is subject to change without notice.
Document Number: 83645
Rev. 1.6, 17-May-11
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号：
©2020 ICPDF网 联系我们和版权申明