MF26171.17MOHM0.5%25PPM [VISHAY]

Fixed Resistor, 0.65W, 1170000ohm, 500V, 0.5% +/-Tol, -25,25ppm/Cel;


型号：	MF26171.17MOHM0.5%25PPM
厂家：	VISHAY
描述：	Fixed Resistor, 0.65W, 1170000ohm, 500V, 0.5% +/-Tol, -25,25ppm/Cel 电阻器
文件：	总3页 (文件大小：801K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MF2000 Series

Powertron

•ꢀ Resistances from 1 to 10MOhms

•ꢀ Power Rating 0.4 to 0.65Watts

•ꢀ Resistance Tolerances to ±0.05%

•ꢀ TCR’s to ±3ppm/K

•ꢀ Very Low Inductance

•ꢀ Matched Sets Available

•ꢀ E192 Values in Stock

SPECIFICATIONS

Resis-

tance

Range

( W )

Power

Rating

Watts @

70°C

Maximum

Voltage

Size

Type

H_(MAX)

D_(MAX)

±0.002”

[±0.05mm]

L_(MIN)

W_(MIN)

( See MFM2207 Drawing )

MFM2207

MF2207

0.40

1 to 5M

300

0.260

[6.5]

0.100

0.028

[0.7]

1.20

0.300

[7.5]

1 to 10M

RN55

[2.5]

[30]

0.600

[15.2]

0.230

[5.8]

0.032

[0.8]

1.20

[30]

0.690

[17.5]

MF2617

0.65

3 to 10M

500

RN65

MFM2207

Speciﬁcation

Value

Resistance Range

Tolerances

1 Ohms to 10MOhms

±0.05% to ±1%

Temperature Coefﬁcient

Temperature Range

( See Charts )

-25°C to +125°C ( TC >= 25ppm/K )

-10°C to +85°C ( TC < 25ppm/K )

Insulation Resistance

Climatic Category

>10000 MOhms

55/125/56

Max Soldering Temperature

Voltage Coefﬁcient

+260°C / 10s

< 5ppm/V

Document Number: 64313

Revision: 20-09-10

For technical questions, contact: powertron@vishaypg.com

www.powertron.de

MF2000 Series

Powertron

SPECIFICATIONS (continued)

MFM2207 TCR / Tolerance / Resistance Chart

Resistances Available at These Tolerances

TCR

( ± ppm/K )

±0.05%

±0.1%

±0.25%

±0.5%

±1%

50 - 250K

50 - 510K

10 - 500K

5 - 1M

10 - 500K

5 - 1M

10 - 500K

5 - 1M

5 - 1.5M

5 - 2M

5 - 1.5M

5 - 3M

5 - 2M

1 - 2M

1 - 5M

2 - 5M

3 - 3M

2 - 5M

MF2207 TCR / Tolerance / Resistance Chart

Resistances Available at These Tolerances

TCR

( ± ppm/K )

±0.05%

±0.1%

±0.25%

30 - 200K

10 - 500K

50 - 1M

5 - 2M

±0.5%

30 - 200K

10 - 500K

50 - 1M

5 - 2M

±1%

50 - 120K

50 - 250K

50 - 510K

30 - 200K

10 - 500K

5 - 1M

5 - 1.5M

5 - 3M

1 - 2M

1 - 5M

1 - 10M

2 - 3M

2 - 5M

5 - 3M

2 - 3M

2 - 10M

MF2617 TCR / Tolerance / Resistance Chart

Resistances Available at These Tolerances

TCR

( ± ppm/K )

±0.05%

±0.1%

±0.25%

50 - 250K

50 - 2M

±0.5%

20 - 510K

20 - 5M

±1%

240 - 250K

240 - 510K

100 - 510K

100 - 250K

100 - 1M

20 - 510K

10 - 5M

3 - 10M

50 - 10M

10 - 10M

5 - 10M

Power Derating Curve

120

100

Ordering Information

100

125

150

175

200

Part Number - Resistance - Tolerance - TCR

Example: MF2207 1.1 kOhm 0.05% 5ppm

Ambient Temperature (°C)

( Note: If no TCR is speciﬁed / the highest value will be supplied )

www.powertron.de

For technical questions, contact: powertron@vishaypg.com

Document Number: 64313

Revision: 20-09-10

Legal Disclaimer Notice

Vishay Precision Group

Disclaimer

ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Vishay Precision Group, Inc., its afﬁliates, agents, and employees, and all persons acting on its or their

behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or

incompleteness contained herein or in any other disclosure relating to any product.

The product speciﬁcations do not expand or otherwise modify Vishay Precision Group’s terms and conditions of

purchase, including but not limited to, the warranty expressed therein.

Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms

and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group

disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability,

including without limitation special, consequential or incidental damages, and (iii) any and all implied

warranties, including warranties of ﬁtness for particular purpose, non-infringement and merchantability.

Information provided in datasheets and/or speciﬁcations may vary from actual results in different applications

and performance may vary over time. Statements regarding the suitability of products for certain types of

applications are based on Vishay Precision Group’s knowledge of typical requirements that are often placed on

Vishay Precision Group products. It is the customer’s responsibility to validate that a particular product with the

properties described in the product speciﬁcation is suitable for use in a particular application.

No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by

any conduct of Vishay Precision Group.

The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise

expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use

in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any

damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel

to obtain written terms and conditions regarding products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.

Document No.: 63999

Revision: 27-Apr-11

www.vishaypg.com

相关型号：