MMB0207-502%HFB256R [VISHAY]
RES,MELF,THIN FILM,56 OHMS,2% +/-TOL,-50,50PPM TC;型号: | MMB0207-502%HFB256R |
厂家: | VISHAY |
描述: | RES,MELF,THIN FILM,56 OHMS,2% +/-TOL,-50,50PPM TC 电阻器 |
文件: | 总9页 (文件大小:144K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MMU 0102 HF, MMA 0204 HF, MMB 0207 HF
Vishay Beyschlag
High Frequency MELF Resistors
FEATURES
• Speciality product for RF applications
• Low-inductance non-helical trimmed product
• Suitable for more than 10 GHz
• Force fitted steel caps, tin plated on nickel barrier
• Pure Sn termination on Ni barrier layer
• Compatible with lead (Pb)-free and lead containing
soldering processes
• Lead (Pb)-free and RoHS compliant
APPLICATIONS
• Telecommunication equipment
• Industrial electronics.
MMU 0102 HF, MMA 0204 HF and MMB 0207 HF speciality
thin film MELF resistors for RF applications are the perfect
choice in high frequency circuit designs where the
impedance change due to the parasitic inductance of regular
and professional resistors can not be accepted. Typical
applications are in the fields of telecommunication
equipment and industrial electronics.
METRIC SIZE
DIN:
0102
0204
0207
CECC:
RC 2211M
RC 3715M
RC 6123M
TECHNICAL SPECIFICATIONS
MMU 0102 HF
MMA 0204 HF
MMB 0207 HF
DESCRIPTION
Metric CECC size
RC 2211M
6.8 Ω to 470 Ω
2 %
RC 3715M
1.5 Ω to 475 Ω
1 %
RC 6123M
6.8 Ω to 470 Ω
2 %
Resistance range
Resistance tolerance
Temperature coefficient
Operation mode
50 ppm/K
standard
power
55/155/56
0.3 W
standard
power
55/155/56
0.4 W
standard
power
55/155/56
1.0 W2)
Climatic category (LCT/UCT/days)
55/125/56
0.2 W
55/125/56
0.25 W
55/125/56
0.4 W
1)
Rated dissipation, P70
Operating voltage, Umax AC/DC
limited by P70
limited by P70
limited by P70
Film temperature
125 °C
155 °C
125 °C
155 °C
125 °C
155 °C
Max. resistance change at P70 for
resistance range,
6.8 Ω to 470 Ω
1.5 Ω to 475 Ω
6.8 Ω to 470 Ω
|ΔR/R| max., after:
1000 h
8000 h
≤ 0.25 %
≤ 0.5 %
≤ 1.5 %
≤ 0.5 %
≤ 1.0 %
-
≤ 0.25 %
≤ 0.5 %
≤ 1.5 %
≤ 0.5 %
≤ 1.0 %
-
≤ 0.25 %
≤ 0.5 %
≤ 1.5 %
≤ 0.5 %
≤ 1.0 %
-
225 000 h
Permissible voltage against ambient
(insulation):
1 minute; Uins
150 V
75 V
≤ 2.0 × 10-9/h
300 V
75 V
≤ 0.7 × 10-9/h
500 V
75 V
≤ 0.7 × 10-9/h
continuous
Failure rate
Note: These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime.
1) The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heatflow support of the
printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is not exceeded. Furthermore, a
high level of ambient temperature or of power dissipation may raise the temperature of the solder joint, hence special solder alloys or board
materials may be required to maintain the reliability of the assembly.
2) Specified power rating requires dedicated heat-sink pads.
www.vishay.com
66
For technical questions contact: ff3bresistors@vishay.com
Document Number: 28718
Revision: 18-Jul-06
MMU 0102 HF, MMA 0204 HF, MMB 0207 HF
High Frequency MELF Resistors
Vishay Beyschlag
12NC INFORMATION
Last Digit of 12NC Indicating Resistance Decade
• The resistors have a 12-digit numeric code starting with
2312.
RESISTANCE DECADE
1 Ω to 9.99 Ω
LAST DIGIT
• The subsequent 4 digits indicate the resistor type,
specification and packaging; see the 12NC table.
8
9
1
10 Ω to 99.9 Ω
• The remaining 4 digits indicate the resistance value:
100 Ω to 999 Ω
– The first 3 digits indicate the resistance value.
12NC Example
– The last digit indicates the resistance decade in
accordance with the 12NC Indicating Resistance
Decade table.
The 12NC of a MMU 0102 HF resistor, value 50 Ω and
TCR 50 with 2 % tolerance, supplied in blister tape of
3000 units per reel is: 2312 168 0500 9.
12NC - resistor type and packaging
ORDERING CODE 2312 ... .....
DESCRIPTION
BLISTER TAPE ON REEL
BULK CASE
B1
B2
BL
168 0....
158 0....
-
B7
B0
178 0....
148 0....
-
M3
M8
TYPE
TCR
TOL.
2 %
1 %
2 %
MMU 0102 HF
MMA 0204 HF
MMB 0207 HF
50 ppm/K
50 ppm/K
50 ppm/K
173 0....
143 0....
183 0....
-
-
-
063 0....
-
-
043 0....
-
-
-
198 0....
188 0....
PART NUMBER AND PRODUCT DESCRIPTION1)
PART NUMBER2): MMA0204AC5009FBL00
M
M
A
0
2
0
4
A
C
5
0
0
9
F
B
L
0
0
PACKAGING3)
MODEL/SIZE SPECIAL CHARACTER
TC
C = 50 ppm/K
VALUE
TOLERANCE
F = 1 %
G = 2 %
SPECIAL
up to 2 digits
00 = standard
MMU0102
MMA0204
MMB0207
A = High Frequency
3 digit value
1 digit multiplier
Multiplier
8 = *10-2
B1
B3
B0
B2
B7
M3
M8
9 = *10-1
0 = *100
PRODUCT DESCRIPTION: MMA 0204-50 1 % HF BL 50R
MMA
0204
- 50
1 %
HF
BL
50R
PACKAGING3)
MODEL
SIZE
TOLERANCE
SUFFIX
RESISTANCE VALUE
TCR
MMU
MMA
MMB
0102
0204
0207
50 ppm/K
1 %
2 %
HF = High Frequency
B1
BL
B0
B2
B7
M3
M8
50R = 50 Ω
Note
1. Products can be ordered using either the PRODUCT DESCRIPTION or the 12NC.
2. The PART NUMBER is shown to facilitate the introduction of a unified part numbering system. Currently, this PART NUMBER is applicable
in the Americas and in Asia/Pacific only.
3. Please refer to table PACKAGING, see below.
Document Number: 28718
Revision: 18-Jul-06
For technical questions contact: ff3bresistors@vishay.com
www.vishay.com
67
MMU 0102 HF, MMA 0204 HF, MMB 0207 HF
High Frequency MELF Resistors
Vishay Beyschlag
PACKAGING
BLISTER TAPE ON REEL
BULK CASE
ACC. IEC 60286 -3
ACC. IEC 60286 -6
MODEL
DIAMETER
PIECES/REEL
CODE
B1
PIECES/BULK CASE
CODE
180 mm/7"
180 mm/7"
330 mm/13"
180 mm/7"
180 mm/7"
330 mm/13"
180 mm/7"
180 mm/7"
330 mm/13"
1000
3000
MMU 0102 HF
MMA 0204 HF
B3 = BL
B0
8000
3000
-
M8
10 000
1000
B1
3000
B3 = BL
B0
M3
-
10 000
1000
B1
MMB 0207 HF
2000
B2
7000
B7
DIMENSIONS
L
Color code marking1)
D
D
1
L
K
1
DIMENSIONS - MELF resistor types, mass and relevant physical dimensions
L
D
(mm)
L1 min
(mm)
D1
(mm)
K
(mm)
MASS
(mg)
TYPE
(mm)
MMU 0102 HF
MMA 0204 HF
MMB 0207 HF
1)
2.2 + 0/- 0.1
3.6 + 0/- 0.2
5.8 + 0/- 0.2
1.1 + 0/- 0.1
1.4 + 0/- 0.1
2.2 + 0/- 0.2
1.2
1.8
2.8
D + 0/- 0.1
D + 0/- 0.15
D + 0/- 0.2
0.4 0.05
0.8 0.1
7
19
79
1.25 0.15
Color code marking is applied according to IEC 60062* in four bands (E24 series) or five bands (E96 series). Each colour band appears as a
single solid line, voids are permissible if at least 2/3 of the band is visible from each radial angle of view. The last color band for tolerance is
approx, 50 % wider than the other bands. An interrupted band between the 3rd and 4th full band identifies the special high frequency type.
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
DESCRIPTION
RESISTANCE VALUE1)
TCR
TOLERANCE
MMU 0102 HF
MMA 0204 HF
MMB 0207 HF
50 Ω,
50 Ω,
2 %
1 %
-
6.8 Ω to 470 Ω
6.8 Ω to 470 Ω
50 ppm/K
50 Ω,
1.5 Ω to 475 Ω
-
-
1)
Resistance value to be selected from E24 series for 2 % tolerance and from E96 series for 1 % tolerance, for other values please contact the
factory.
www.vishay.com
68
For technical questions contact: ff3bresistors@vishay.com
Document Number: 28718
Revision: 18-Jul-06
MMU 0102 HF, MMA 0204 HF, MMB 0207 HF
High Frequency MELF Resistors
Vishay Beyschlag
APPROVALS
DESCRIPTION
Production is strictly controlled and follows an extensive
Where applicable the resistors are tested in accordance with
EN 140401-803 (superseding CECC 40401-803) which
refers to EN 60115-1, EN 140400 and the variety of
enviromental test procedures of the IEC 60068* series.
set of instructions established for reproducibility.
A
homogeneous film of metal alloy is deposited on a high grade
(85 % Al2O3, for MICRO-MELF: 96 % Al2O3) ceramic body
and conditioned to achieve the desired temperature
coefficient. Nickel plated steel termination caps are firmly
pressed on the metallised rods. A special laser is used to
achieve the target value by smoothly cutting a non helical
pattern with a resulting low inductivity in the resistive layer
without damaging the ceramics. The resistor elements are
covered by a protective coating designed for electrical,
mechanical and climatic protection.The terminations receive
a final pure tin on nickel plating. Four or five color code rings
designate the resistance value and tolerance in accordance
with IEC 60062*. Additional black dots near the 3rd colour
ring identify the special HF product.
Vishay BEYSCHLAG has achieved "Approval of
Manufacturer" in accordance with IEC QC 001002-3,
clause 2. The release certificate for “Technology Approval
Schedule” in accordance with CECC 240001 based on
IEC QC 001002-3, clause 6 is granted for the Vishay
BEYSCHLAG manufacturing process.
Note:
* The quoted IEC standards are also released as EN standards with
the same number and identical contents.
The result of the determined production is verified by an
extensive testing procedure performed on 100 % of the
individual resistors. Only accepted products are laid directly
into the blister tape in accordance with IEC 60286-3* or bulk
case in accordance with IEC 60286-6*.
ASSEMBLY
The resistors are suitable for processing on automatic
SMD assembly systems. They are suitable for automatic
soldering using wave, reflow or vapour phase as shown in
IEC 61760-1*. Excellent solderability is proven, even after
extended storage in excess of 10 years. The encapsulation
is resistant to all cleaning solvents commonly used in the
electronics industry, including alcohols, esters and aqueous
solutions. The resistors are completely lead (Pb)-free, the
pure tin plating provides compatibility with lead (Pb)-free
soldering processes. The immunity of the plating against tin
whisker growth has been proven under extensive testing.
All products comply with the GADSL1) and the CEFIC-
EECA-EICTA2) list of legal restrictions on hazardous
substances. This includes full compliance with the following
directives:
•
2000/53/EC End of Vehicle life Directive (ELV) and
Annex II (ELV II)
• 2002/95/EC Restriction of the use of Hazardous
Substances Directive (RoHS)
• 2002/96/EC Waste Electrical and Electronic Equipment
Directive (WEEE)
1)
Global Automotive Declarable Substance List, see www.gadsl.org
2)
CEFIC (European Chemical Industry Council), EECA (European
Electronic Component Manufacturers Association), EICTA
(European trade organisation representing the information and
communications technology and consumer electronics), see
www.eicta.org -> issues -> environment policy -> chemicals ->
chemicals for electronics
Document Number: 28718
Revision: 18-Jul-06
For technical questions contact: ff3bresistors@vishay.com
www.vishay.com
69
MMU 0102 HF, MMA 0204 HF, MMB 0207 HF
High Frequency MELF Resistors
Vishay Beyschlag
FUNCTIONAL PERFORMANCE
1
MMB 0207 HF
MMA 0204 HF
MMU 0102 HF
W
0.5
0
- 50
0
50
70
100
C
150
Ambient Temperature ϑ amb
Derating - Standard Operation
1
W
MMB 0207 HF1)
MMA 0204 HF
MMU 0102 HF
0.5
0
- 50
0
50
70
100
150
C
Ambient Temperatureϑ amb
1) Specified power rating requires dedicated heat sink pads
Derating - Power Operation
2.0
6.8 Ω
27 Ω
1.5
1.0
50 Ω
100 Ω
220 Ω
0.5
0.1
470 Ω
10 GHz 20
Frequency f
1
IZI/R for MMU 0102 HF
RF - Behavior
www.vishay.com
70
For technical questions contact: ff3bresistors@vishay.com
Document Number: 28718
Revision: 18-Jul-06
MMU 0102 HF, MMA 0204 HF, MMB 0207 HF
High Frequency MELF Resistors
Vishay Beyschlag
2.0
1.5
6.8 Ω
27 Ω
50 Ω
1.0
0.5
100 Ω
220 Ω
470 Ω
10 GHz 20
0.1
1
Frequency f
IZI/R for MMA 0204 HF
RF - Behavior
2.0
1.5
8.2 Ω
27 Ω
50 Ω
1.0
100 Ω
150 Ω
0.5
0.1
430 Ω
10 GHz 20
1
Frequency f
IZI/R for MMB 0207 HF
RF - Behavior
Document Number: 28718
Revision: 18-Jul-06
For technical questions contact: ff3bresistors@vishay.com
www.vishay.com
71
MMU 0102 HF, MMA 0204 HF, MMB 0207 HF
High Frequency MELF Resistors
Vishay Beyschlag
TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance with the
following specifications:
Unless otherwise specified the following values apply:
Temperature: 15 °C to 35 °C
EN 60115-1, generic specification
EN 140400, sectional specification
EN 140401-803, detail specification
Relative humidity: 45 % to 75 %
Air pressure: 86 kPa to 106 kPa (860 mbar to 1 060 mbar).
The components are mounted for testing on printed-circuit
boards in accordance with EN 140400, 2.3.3, unless
otherwise specified.
The Test Procedures and Requirements table contains the
applicable tests selected from the documents listed above.
The tests are carried out in accordance with IEC 60068* and
under standard atmospheric conditions in accordance with
IEC 60068-1, 5.3.* Climatic category LCT/UCT/56 (rated
temperature range: Lower Category Temperature, Upper
Category Temperature; damp heat, long term, 56 days) is
valid.
The requirements stated in the Test Procedures and
Requirements table are based on the required tests and
permitted limits of EN 140401-803.
TEST PROCEDURES AND REQUIREMENTS
EN
IEC
REQUIREMENTS
PROCEDURE
60115-1
CLAUSE
60068-2*
TEST
TEST
PERMISSIBLE CHANGE (ΔR)
METHOD
stability for product types:
MMU 0102 HF
6.8 Ω to 470 Ω
1.5 Ω to 475 Ω
6.8 Ω to 470 Ω
MMA 0204 HF
MMB 0207 HF
4.5
-
resistance
MMU 0102 HF, MMB 0207 HF:
MMA 0204 HF:
2 % R
1 % R
temperature coefficient
at 20/- 55/20 °C and 20/125/20 °C
50 ppm/K
4.8.4.2
4.25.1
-
-
endurance at 70 °C:
standard operation mode
U = P70 × R ≤ Umax
;
1.5 h on; 0.5 h off;
70 °C; 1000 h;
70 °C; 8000 h
(0.25 % R + 0.05 Ω)
(0.5 % R + 0.05 Ω)
endurance at 70 °C:
power operation mode
U = P70 × R ≤ Umax
1.5 h on; 0.5 h off;
;
70 °C; 1000 h
70 °C; 8000 h
125 °C; 1000 h
155 °C; 1000 h
(0.5 % R + 0.05 Ω)
(1 % R + 0.05 Ω)
(0.5 % R + 0.05 Ω)
(1 % R + 0.05 Ω)
(0.5 % R + 0.05 Ω)
endurance at upper category
temperature
4.25.3
-
(40 2) °C; 56 days; (93 3) % RH
4.24
78 (Cab)
damp heat, steady state
climatic sequence:
dry heat
4.23
UCT; 16 h
4.23.2
4.23.3
4.23.4
4.23.5
4.23.6
4.23.7
2 (Ba)
30 (Db)
1 (Aa)
13 (M)
30 (Db)
-
55 °C; 24 h; ≥ 90 % RH; 1 cycle
LCT; 2 h
damp heat, cyclic
cold
8.5 kPa; 2 h; (25 10) °C
55 °C; 24 h; ≥ 90 % RH; 5 cycles
low air pressure
damp heat, cyclic
d.c. load
U = P70 × R ≤ Umax; 1 min.
LCT = - 10 °C; UCT = 85 °C
- 55 °C; 2 h
(0.5 % R + 0.05 Ω)
(0.1 % R + 0.01 Ω)
-
1 (Aa)
cold
30 minutes at - 55 °C;
30 minutes at 155°C; 5 cycles
4.19
14 (Na)
rapid change of temperature
(0.25 % R + 0.05 Ω)
www.vishay.com
72
For technical questions contact: ff3bresistors@vishay.com
Document Number: 28718
Revision: 18-Jul-06
MMU 0102 HF, MMA 0204 HF, MMB 0207 HF
High Frequency MELF Resistors
Vishay Beyschlag
TEST PROCEDURES AND REQUIREMENTS
EN
IEC
60115-1
CLAUSE
60068-2*
TEST
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR)
TEST
PROCEDURE
METHOD
stability for product types:
MMU 0102 HF
6.8 Ω to 470 Ω
1.5 Ω to 475 Ω
6.8 Ω to 470 Ω
MMA 0204 HF
MMB 0207 HF
short time overload;
standard operation mode
U = 2.5 × P70 × R ≤ 2 × Umax
;
(0.1 % R + 0.01 Ω)
(0.1 % R + 0.01 Ω)
5 s
4.13
-
short time overload;
power operation mode
U = 2.5 × P70 × R ≤ 2 × Umax
5 s
;
IEC 61340-3-1*;
3 pos. + 3 neg. discharges
MMU 0102 HF: 800 V
MMA 0204 HF: 1000 V
MMB 0207 HF: 2000 V
electrostatic discharge
(Human Body Model)
4.40
4.29
-
(0.5 % R + 50 mΩ)
isopropyl alcohol;
50 °C; method 2
45 (XA)
component solvent resistance
no visible damage
isopropyl alcohol; 50 °C;
method 1, toothbrush
4.30
45 (XA)
58 (Td)
solvent resistance of marking
solderability
marking legible; no visible damage
solder bath method; SnPb40;
non-activated flux;
(215 3) °C; (3 0.3) s
4.17.2
good tinning (≥ 95 % covered);
no visible damage
solder bath method; SnAg3Cu0.5 or
SnAg3.5; non-activated flux;
(235 3) °C; (2 0.2) s
good tinning (≥ 95 % covered);
no visible damage
solder bath method;
(260 5) °C; (10 1) s
4.18.2
58 (Td)
resistance to soldering heat
(0.5 % R + 0.05 Ω)
4.32
4.35
21 (Ue3)
-
shear (adhesion)
flammability
45 N
no visible damage
IEC 60 695-11-5*,
needle flame test; 10 s
no burning after 30 s
Note:
* The quoted IEC standards are also released as EN standards with the same number and identical contents.
REVISION HISTORY
Compared to the prior revision of this datasheet, 26-Feb-04, the following changes have been applied:
• Introduction of a standardized part numbering system
• Additional emphasis on the clean balance of materials and on the compliance with various EU directives
• Introduction of a test and requirements for electrostatic discharge (ESD)
• No other change of technical contents
• No product change
Document Number: 28718
Revision: 18-Jul-06
For technical questions contact: ff3bresistors@vishay.com
www.vishay.com
73
Legal Disclaimer Notice
Vishay
Disclaimer
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 18-Jul-08
www.vishay.com
1
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明