MRCN081N102G391KCT [VISHAY]

RC Network, ECL Terminator, 0.2W, 1000ohm, 50V, 0.00039uF, Through Hole Mount, 8 Pins, SIP, ROHS COMPLIANT;


型号：	MRCN081N102G391KCT
厂家：	VISHAY
描述：	RC Network, ECL Terminator, 0.2W, 1000ohm, 50V, 0.00039uF, Through Hole Mount, 8 Pins, SIP, ROHS COMPLIANT
文件：	总3页 (文件大小：64K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MRCN

Vishay Techno

Thick Film Resistor/Capacitor Networks,

Single-In-Line, Molded SIP

FEATURES

 Isolated and ECL terminator schematics

available

 Custom schematics available

 NP0 or X7R capacitors for line terminator

 Wide operating temperature

range

(- 55 °C to 125 °C)

 Molded epoxy case

 Solder coated copper terminals

 Solderability per MIL-STD-202 method 208E

Marking resistance to solvents per MIL-STD-202 method 215



 Compliant to RoHS Directive 2002/95/EC

STANDARD ELECTRICAL SPECIFICATIONS

RESISTOR CHARACTERISTICS

CAPACITOR CHARACTERISTICS

MODEL SCHEMATIC

POWER RESISTANCE RESISTANCE

TEMP.

CAPACITANCE CAPACITANCE

CAPACITANCE

RANGE

RATING

P_{70 °C}

RANGE

TOLERANCE ⁽¹⁾COEFF. TYPE ⁽²⁾

TOLERANCE ⁽³⁾

ꢀ

VOLTAGE

V_DC



ꢀ

ppm/°C

NP0 33 pF to 3900 pF

10, 20

0.20

50 to 1K

1, 2, 5

150

X7R

NP0 33 pF to 3900 pF

X7R 470 pF to 0.1 µF

NP0 33 pF to 3900 pF

X7R 470 pF to 0.1 µF

470 pF to 0.1 µF

MRCN

1, 2, 5

150

Notes

⁽¹⁾2 % standard, 1 % and 5 % available

⁽²⁾NP0 Capacitors may be substituted for X7R capacitors

⁽³⁾Tighter tolerances available on request

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: MRCN081N101J560KTB (preferred part number format)

GLOBAL

MODEL

COUNT

RESISTANCE RESISTANCE CAPACITANCE CAPACITANCE

TERMINAL

FINISH

SCHEMATIC CHARACTERISTIC

PACKAGING

VALUE

TOLERANCE

VALUE

TOLERANCE

MRCN

08 = 8 pin

10 = 10 pin

= 10

= 20

= 30

= NP0

= X7R

2 digit

significant

figure, followed

by a multiplier

101 = 100

220 = 22

= 1 %

= 2 %

= 5 %

(In picofarads)

2 digit significant

figure, followed

by a multiplier

101 = 100 pF

392 = 3000 pF

104 = 0.1 µF

= 10 %

= 20 %

= Bulk

= Tray

Sn90/Pb10

C = Sn95.5/

Ag3.9/



Cu0.6

102 = 1 k

Historical Part Numbering: MRCN0801101J560KS10 (will continue to be accepted)

MRCN

101

560

S10

HISTORICAL

MODEL

COUNT

RESISTANCE

VALUE

RESISTANCE

TOLERANCE

CAPACITANCE

VALUE

CAPACITANCE

TOLERANCE

TERMINAL

FINISH

SCHEMATIC

* Pb containing terminations are not RoHS compliant, exemptions may apply

Document Number: 68008

Revision: 09-Mar-11

For technical questions, contact: te1resistors@vishay.com

www.vishay.com

MRCN

Thick Film Resistor/Capacitor Networks,

Single-In-Line, Molded SIP

Vishay Techno

SCHEMATICS

SCHEMATIC 10

10K ECL TERMINATOR NETWORK

SCHEMATIC 20

SCHEMATIC 30

100K ECL TERMINATOR NETWORK

n-1

DIMENSIONS in inches (millimeters)

0.150 0.010

(3.81 0.254)

#1 Pin

Pin #1 Identifier

0.020 0.002

(0.508 0.051)

(Seating

Plane)

0.020 0.002

(0.508 0.051)

0.125 0.015

(3.18 0.381)

0.100 0.005

(2.54 0.127)

0.010 0.002

(0.254 0.051)

Non-Cumulative

NUMBER OF PINS

0.010 (0.254)

0.780 (19.81)

1.040 (26.42)

0.010 (0.254)

0.040 (1.02)

0.075 (1.91)

0.345 (8.76)

0.316 (8.03)

Note

Custom schematics available

•

www.vishay.com

For technical questions, contact: te1resistors@vishay.com

Document Number: 68008

Revision: 09-Mar-11

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.

Revision: 02-Oct-12

Document Number: 91000

相关型号：