MRS25000C1009FRP00 [VISHAY]

RES 10 OHM 0.6W 1% AXIAL;


型号：	MRS25000C1009FRP00
厂家：	VISHAY
描述：	RES 10 OHM 0.6W 1% AXIAL
文件：	总4页 (文件大小：93K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MRS16, MRS25

Vishay BCcomponents

www.vishay.com

Professional Thin Film Leaded Resistors

FEATURES

• Technology: metal film

• Professional resistors in small outlines

• Low noise

• Material categorization: for definitions of

compliance

please

see

www.vishay.com/doc?99912

DESCRIPTION

APPLICATIONS

A homogeneous film of metal alloy is deposited on a high

grade ceramic body. After a helical groove has been cut in

the resistive layer, tinned connecting wires of electrolytic

copper are welded to the end-caps. The resistors are coated

with lacquer which provides electrical, mechanical, and

climatic protection. Four or five color code rings designate

the resistance value and tolerance according to IEC 60062.

Suitable replacements for MRS16 and MRS25 are

MBA/SMA 0204 and MBB/SMA 0207 professional.

• All general purpose applications

TECHNICAL SPECIFICATIONS

DESCRIPTION

MRS16

MRS25

0207

DIN size

0204

CECC size

Resistance range

Resistance tolerance

Temperature coefficient

4.99 to 1 M

1 to 10 M

1 %

50 ppm/K

(1)

Rated dissipation, P₇₀

0.4 W

200 V

0.6 W

350 V

Operating voltage, U_max.AC/DC

Operating temperature range ⁽¹⁾

Peak permissible film temperature ⁽¹⁾

Insulation voltage:

-55 °C to 155 °C

155 °C

1 min; U_ins

continuous

300 V

75 V

500 V

75 V

Note

(1)

Please refer to APPLICATION INFORMATION below.

Revision: 07-Mar-16

Document Number: 28724

For technical questions, contact: filmresistorsleaded@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MRS16, MRS25

Vishay BCcomponents

www.vishay.com

APPLICATION INFORMATION

The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow

support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is

not exceeded. Furthermore, a high level of ambient temperature or of power dissipation may raise the temperature of the solder

joint, hence special solder alloys or board materials may be required to maintain the reliability of the assembly.

These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift

increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a

functional lifetime. The designer may estimate the performance of the particular resistor application or set certain load and

temperature limits in order to maintain a desired stability.

MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION

Operation mode

Power

-55 °C / +155 °C / 56 days

0.4 W

Climatic category

MRS16

MRS25

Rated dissipation, P₇₀

0.6 W

Applied maximum film temperature, _{F max.}

155 °C

MRS16

1000 h

MRS25

1000 h

4.99  to 1 M

(0.5 % R + 0.05 )

1to 10 M

(0.5 % R + 0.05 )

Max. resistance change at rated

dissipation |R/R max.|, after:

PART NUMBER AND PRODUCT DESCRIPTION

PART NUMBER: MRS16000C5119FCT00

TYPE

VARIANT

TCR

RESISTANCE

TOLERANCE PACKAGING ⁽¹⁾

SPECIAL

MRS1600

MRS2500

0 = neutral

C = 50 ppm/K

3 digit value

F = 1 %

Up to 2 digits

00 = standard

1 digit multiplier

MULTIPLIER

7 = *10^-3

2 = *10²

3 = *10³

4 = *10⁴

5 = *10⁵

6 = *10⁶

8 = *10^-2

9 = *10^-1

0 = *10⁰

1 = *10¹

PRODUCT DESCRIPTION: MRS16 50 1 % CT 51R1

MRS16

1 %

51R1

TYPE

TCR

TOLERANCE

PACKAGING ⁽¹⁾

RESISTANCE VALUE

MRS16

MRS25

50 ppm/K

1 %

51R1 = 51.1 

1K = 1 k

Notes

•

The PART NUMBER is shown to facilitate the introduction of a unified part numbering system for ordering products

Please refer packaging table

(1)

PACKAGING

TYPE

CODE

QUANTITY

1000

PACKAGING STYLE

WIDTH

PITCH

DIMENSIONS

184 mm x 75 mm x 42 mm

330 mm x 75 mm x 55 mm

Taped acc. to IEC 60286-1

fan-folded in a box

MRS16

MRS25

5000

53 mm

5 mm

Taped acc. to IEC 60286-1

on a reel

5000

242 mm x 76 mm x 86 mm

Revision: 07-Mar-16

Document Number: 28724

For technical questions, contact: filmresistorsleaded@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MRS16, MRS25

Vishay BCcomponents

www.vishay.com

DIMENSIONS

DIMENSIONS (Leaded Resistor Types, Mass and Relevant Physical Dimensions)

D_max.

(mm)

L_max.

(mm)

I_min.

(mm)

M_min.

(mm)

MASS

(mg)

d_nom.

(mm)

TYPE

MRS16

MRS25

1.6

2.5

3.6

6.5

0.5

0.6

29.0

28.0

5.0

125

220

10.0

12NC INFORMATION FOR HISTORICAL CODING REFERENCE

• The resistors have a 12 digit numeric code starting with

2322 15.

Last Digit of 12NC Indicating Resistance Decade

RESISTANCE DECADE

1  to 9.76 

LAST DIGIT

• The subsequent 2 digits indicate the resistor type and

packaging; see the 12NC Ordering Code table.

10  to 97.6 

100  to 976 

1 k to 9.76 k

10 k to 97.6 k

100 k to 976 k

1 M to 9.76 M

10 M

• The remaining 4 digits indicate the resistance value:

- The first 3 digits indicate the resistance value.

- The last digit indicates the resistance decade in

accordance with the 12NC Indicating Resistance

Decade table.



12NC Example

The 12NC of a MRS16 resistor with value 750 , supplied on

a bandolier of 1000 units in ammopack is: 2322 157 17501.

12NC (Resistors Type and Packaging)

2322 15. .....

TYPE

BANDOLIER IN AMMOPACK

BANDOLIER ON REEL

1000 UNITS

7 1....

5000 UNITS

7 2....

5000 UNITS

7 3....

MRS16

MRS25

6 1....

6 2....

6 3....

Revision: 07-Mar-16

Document Number: 28724

For technical questions, contact: filmresistorsleaded@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product

with the properties described in the product specification is suitable for use in a particular application. Parameters provided in

datasheets and / or specifications may vary in different applications and performance may vary over time. All operating

parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.

Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited

to the warranty expressed therein.

Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and

for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of

any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.

Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website

or for that of subsequent links.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Revision: 09-Jul-2021

Document Number: 91000

相关型号：