MT-100.0301OHM0.1%4T [VISHAY]

Fixed Resistor, Wire Wound, 10W, 0.0301ohm, 0.1% +/-Tol, -20,20ppm/Cel;


型号：	MT-100.0301OHM0.1%4T
厂家：	VISHAY
描述：	Fixed Resistor, Wire Wound, 10W, 0.0301ohm, 0.1% +/-Tol, -20,20ppm/Cel 电阻器
文件：	总3页 (文件大小：815K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MT Series

Powertron

•ꢀ Resistances from 0.003 to 0.10Ohms

•ꢀ Tolerance to ±0.1%

•ꢀ TCR’s to ± 20 ppm/K ( Four Terminal Version )

•ꢀ For Current Sensing and Shunt Applications

•ꢀ All Welded Construction

•ꢀ Low Inductance ( <10nH )

•ꢀ Four Terminal Versions Available (Consult Factory)

SPECIFICATIONS

Speciﬁcation

Resistance Range

Tolerances

Value

0.003 to 0.10 Ohms

2 Terminal: ±1% / ±5% ( Contact Factory for Others )

4 Terminal: ±0.1% / ±0.5% / ±1% / ±5% ( Contact Factory for Others )

Temperature Coefﬁcient

Inductance

See Chart Below

<10nH

Dielectric Strength

Insulation Resistance

1000VAC ( 500VAC for MT-1A and MT-2A )

>1000 MOhms / Dry

Environmental Performance

Test Conditions

(MIL-STD 202)

Load Life

±1%

70°C / 90 min ON / 30 min OFF / 1000 hr

40°C / 90-95% RH / DC 0.1W / 1000 hr

-40°C for 30 min / +125°C for 30 min / 1000 hr

5X rated power for 5 seconds

Moisture Resistance

Temperature Cycling

Short Term Overload

TemperatureꢀCoefﬁcient

of Resistance (TCR)

Power Derating Curve

500

400

300

200

100

120

100

2 Terminal

4 Terminal

0.01

0.03

0.05

0.07

0.09

0.11

0.13

100

150

200

250

300

350

Resistance Value ( W )

Ambient Temperature (°C)

Ordering Information

Part Number - Resistance - Tolerance - TCR ( if not standard ) - 4T ( if desired )

Example: MT-5 0.01 Ohm 1% 4T

Document Number: 64320

Revision: 20-09-10

For technical questions, contact: powertron@vishaypg.com

www.powertron.de

MT Series

Powertron

SPECIFICATIONS(continued)

Dimensions

Power Rating

Watts @ 25°C

Type

W (4T)

±0.010”

[±0.3mm]

±0.020”

[±0.5mm]

±0.020”

[±0.5mm]

±0.020”

[±0.5mm]

±0.002”

[±0.05mm]

MT-1A

MT-2A

MT-2B

MT-2C

MT-3

0.430 [10.9]

0.580 [14.7]

0.500 [12.7]

0.600 [15.2]

0.750 [19.1]

0.890 [22.6]

1.055 [26.8]

1.755 [44.58]

0.120 [3.0]

0.200 [5.1]

0.250 [6.4]

0.335 [8.5]

0.395 [10.0]

0.355 [9.02]

0.590 [15.0]

0.665 [16.9]

0.625 [15.9]

0.675 [17.1]

0.750 [19.1]

0.820 [20.8]

0.903 [22.9]

1.338 [34.0]

0.025 [0.6]

0.032 [0.8]

0.040 [1.0]

0.125 [3.2]

MT-4

4.5

MT-5

MT-6

MT-10

www.powertron.de

For technical questions, contact: powertron@vishaypg.com

Document Number: 64320

Revision: 20-09-10

Legal Disclaimer Notice

Vishay Precision Group

Disclaimer

ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Vishay Precision Group, Inc., its afﬁliates, agents, and employees, and all persons acting on its or their

behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or

incompleteness contained herein or in any other disclosure relating to any product.

The product speciﬁcations do not expand or otherwise modify Vishay Precision Group’s terms and conditions of

purchase, including but not limited to, the warranty expressed therein.

Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms

and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group

disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability,

including without limitation special, consequential or incidental damages, and (iii) any and all implied

warranties, including warranties of ﬁtness for particular purpose, non-infringement and merchantability.

Information provided in datasheets and/or speciﬁcations may vary from actual results in different applications

and performance may vary over time. Statements regarding the suitability of products for certain types of

applications are based on Vishay Precision Group’s knowledge of typical requirements that are often placed on

Vishay Precision Group products. It is the customer’s responsibility to validate that a particular product with the

properties described in the product speciﬁcation is suitable for use in a particular application.

No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by

any conduct of Vishay Precision Group.

The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise

expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use

in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any

damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel

to obtain written terms and conditions regarding products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.

Document No.: 63999

Revision: 27-Apr-11

www.vishaypg.com

相关型号：