NH010R3900GC02 [VISHAY]

Fixed Resistor, Wire Wound, 12.5W, 0.39ohm, 2% +/-Tol, -100,100ppm/Cel, 7580,;


型号：	NH010R3900GC02
厂家：	VISHAY
描述：	Fixed Resistor, Wire Wound, 12.5W, 0.39ohm, 2% +/-Tol, -100,100ppm/Cel, 7580, 电阻器
文件：	总5页 (文件大小：198K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

RH, NH

Vishay Dale

Wirewound Resistors, Military, MIL-PRF-18546 Qualified,

Type RE, Aluminum Housed, Chassis Mount

FEATURES

• Molded construction for total environmental

protection

Pb-free

• Complete welded construction

• Meets applicable requirements of

MIL-PRF-18546

• Available in non-inductive styles (type NH)

with Aryton-Perry winding for lowest reactive

components

• Mounts on chassis to utilize heat-sink effect

• Excellent stability in operation (< 1 % change

in resistance)

Available

RoHS*

COMPLIANT

STANDARD ELECTRICAL SPECIFICATIONS

POWER RATING

RESISTANCE RANGE

MIL-PRF-

18546

WEIGHT

(typical)

P_{25 °C}

MIL. RANGE SHOWN IN BOLD FACE

GLOBAL HISTORICAL

MODEL

TYPE

DALE

MILITARY

ꢀ.ꢀ5 %, ꢀ.1 %

ꢀ.25 %

ꢀ.5 %

1 %, 2 %, 5 %

0.5 - 6.75K

0.5 - 2.32K

0.5 - 12.7K

0.5 - 4.45K

0.5 - 25.7K

0.5 - 9.09K

0.5 - 73.4K

0.5 - 26K

0.5 - 90K

0.5 - 37.5K

0.5 - 116K

0.5 - 48.5K

0.1 - 8.6K

0.05 - 8.6K

0.02 - 24.5K

ꢀ.1ꢀ - 3.32K

0.05 - 12.75K

1.ꢀ - 1.65K

0.01 - 47.1K

ꢀ.1ꢀ - 5.62K

0.05 - 23.5K

RH005

NH005

RH010

NH010

RH025

NH025

RH050

NH050

RH100

NH100

RH250

NH250

RH-5

NH-5

7.5 (5)

3.3

RE6ꢀG

0.1 - 3.27K 0.05 - 3.27K

7.5 (5)

12.5 (10)

1ꢀ

2ꢀ

3ꢀ

12ꢀ

RE6ꢀN

0.1 - 16.69K 0.05 - 16.69K

RH-10

NH-10

RH-25

NH-25

RH-50

NH-50

RH-100

NH-100

RH-250

NH-250

RE65G

0.1 - 5.54K 0.05 - 5.54K

8.8

RE65N

1.ꢀ - 2.8K

0.1 - 32.99K 0.05 - 32.99K

0.01 - 95.2K

ꢀ.1ꢀ - 12.1K

0.05 - 47.6K

1.ꢀ - 6.ꢀ4K

0.01 - 273K

ꢀ .1ꢀ - 39.2K

0.05 - 136K

1.ꢀ - 19.6K

0.05 - 90K

ꢀ.ꢀ5 - 29.4K

0.05 - 37.5K

1.ꢀ - 14.7K

0.05 - 116K

ꢀ.1ꢀ - 35.7K

0.05 - 48.5K

1.ꢀ - 17.4K

RE7ꢀG

0.1 - 12.8K 0.05 - 12.8K

16.5

RE7ꢀN

0.1 - 96K

0.05 - 96K

RE75G

0.1 - 36.7K 0.05 - 36.7K

RE75N

0.1 - 90K

0.05 - 90K

100

350

385

630

690

RE77G

0.1 - 37.5K 0.05 - 37.5K

100

RE77N

0.1 - 116K

0.05 - 116K

250

RE8ꢀG

0.1 - 48.5K 0.05 - 48.5K

250

RE8ꢀN

Note

• Figures in parentheses on RH-5 and RH-10 indicate wattage printed on parts, new construction allows these resistors to be rated at higher

wattage but will only be printed with the higher wattage on customer request

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: RHꢀꢀ54R125FCꢀ2 (preferred part number format)

ꢀ

RESISTANCE

VALUE

TOLERANCE

CODE

GLOBAL MODEL

PACKAGING

SPECIAL

RHꢀꢀ5

L = Milliohm

R = Decimal

K = Thousand

8Lꢀꢀꢀ = 0.008 Ω

15Rꢀꢀ = 15 Ω

A = 0.05 %

B = 0.1 %

C = 0.25 %

D = 0.5 %

F = 1.0 %

Eꢀ2 = Lead (Pb)-free, card pack (RH005 - RH050)

Eꢀ1 = Lead (Pb)-free, skin pack (RH100 and RH250)

Lead (Pb)-free is not available on RE military type

(Dash Number)

(up to 3 digits)

From 1 - 999

as applicable

(See “Standard

Electrical

Specifications”

table above for

additional P/N’s)

Cꢀ2 = Tin/lead, card pack (RH005 - RH050)

Jꢀ1 = Tin/lead, skin pack (RH100 and RH250)

Historical Part Number Example: RH-5 4.125 Ω 1 % Cꢀ2 (will continue to be accepted)

RH-5

4.125 Ω

1 %

Cꢀ2

HISTORICAL MODEL

RESISTANCE VALUE

TOLERANCE CODE

PACKAGING

* Pb containing terminations are not RoHS compliant, exemptions may apply

www.vishay.com

154

For technical questions, contact: ww2bresistors@vishay.com

Document Number: 30201

Revision: 11-Jul-07

RH, NH

Wirewound Resistors, Military, MIL-PRF-18546 Qualified,

Type RE, Aluminum Housed, Chassis Mount

Vishay Dale

DIMENSIONS in inches [millimeters]

RH-5, -1ꢀ, -25, -5ꢀ

NH-5, -1ꢀ, -25, -5ꢀ

DIMENSIONS in inches [millimeters]

MODEL

0.444

0.005

0.490

0.005

0.600

0.030

1.125

0.062

0.334

0.015

[8.48

0.646

0.015

[16.41

0.320

0.015

[8.13

0.065

0.010

[1.65

0.133

0.010

[3.38

0.078

0.010

[1.98

0.093

0.005

[2.36

0.078

0.015

[1.98

0.050

0.005

[1.27

0.266

0.062

[6.76

1.57]

RH-5

NH-5

[11.28 [12.45 [15.24 [28.58

0.127] 0.127] 0.787]

1.57]

0.381] 0.381] 0.381] 0.254] 0.254] 0.254] 0.127] 0.381] 0.127]

0.562

0.005

0.625

0.005

0.750

0.031

1.375

0.062

0.420

0.015

0.800

0.015

0.390

0.015

[9.91

0.075

0.010

[1.91

0.165

0.010

[4.19

0.093

0.010

[2.36

0.094

0.005

[2.39

0.102

0.015

[2.59

0.085

0.005

[2.16

0.312

0.062

[7.92

1.57]

RH-1ꢀ

NH-1ꢀ

[14.27 [15.88 [19.05 [34.93 [10.67 [20.32

0.127] 0.127] 0.787]

1.57]

0.381] 0.381] 0.381] 0.254] 0.254] 0.254] 0.127] 0.381] 0.127]

0.719

0.005

0.781

0.005

1.062

0.031

1.938

0.062

0.550

0.015

1.080

0.015

0.546

0.015

0.075

0.010

[1.91

0.231

0.010

[5.87

0.172

0.010

[4.37

0.125

0.005

[3.18

0.115

0.015

[2.92

0.085

0.005

[2.16

0.438

0.062

[11.13

1.57]

RH-25

NH-25

[18.26 [19.84 [26.97 [49.23 [13.97 [27.43 [13.87

0.127] 0.127] 0.787]

1.57]

0.381] 0.381] 0.381] 0.254] 0.254] 0.254] 0.127] 0.381] 0.127]

1.562

0.005

0.844

0.005

1.968

0.031

2.781

0.062

0.630

0.015

1.140

0.015

0.610

0.015

0.088

0.010

[2.24

0.260

0.010

[6.60

0.196

0.010

[4.98

0.125

0.005

[3.18

0.107

0.015

[2.72

0.085

0.005

[2.16

0.438

0.062

[11.13

1.57]

RH-5ꢀ

NH-5ꢀ

[39.67 [21.44 [49.99 [70.64 [16.00 [28.96 [15.49

0.127] 0.127] 0.787]

1.57]

0.381] 0.381] 0.381] 0.254] 0.254] 0.254] 0.127] 0.381] 0.127]

DIMENSIONS in inches [millimeters]

RH-1ꢀꢀ, NH-1ꢀꢀ

ꢀ.188 ꢀ.ꢀ1ꢀ

[4.78 ꢀ.254ꢁ

Dia. typ.

Nickel plated

brass nut

3.5ꢀ ꢀ.ꢀ31

[88.9ꢀ ꢀ.787ꢁ

1.812 ꢀ.ꢀ31

[46.ꢀ2 ꢀ.787ꢁ

stainless steel stud

1.125 ꢀ.ꢀ31

[28.58 ꢀ.787ꢁ

2.812 ꢀ.ꢀ31

[71.42 ꢀ.787ꢁ

1.75 ꢀ.ꢀ31

[44.45 ꢀ.787ꢁ

2.25 ꢀ.ꢀ1ꢀ

[57.15 ꢀ.254ꢁ

ꢀ.375 ꢀ.ꢀ31

[9.52 ꢀ.787ꢁ

ꢀ.188 ꢀ.ꢀ31

[4.78 ꢀ.787ꢁ

ꢀ.989 ꢀ.ꢀ31

[25.12 ꢀ.787ꢁ

12 - 24

UNC-2A

Thd. typ.

ꢀ.77ꢀ ꢀ.ꢀ15

[19.56 ꢀ.381ꢁ

2.75 ꢀ.ꢀ1ꢀ

[69.85 ꢀ.254ꢁ

5.478 ꢀ.ꢀ93

[139.14 2.36ꢁ

typ.

RH-25ꢀ, NH-25ꢀ

ꢀ.188 ꢀ.ꢀ1ꢀ

[4.78 ꢀ.254ꢁ

Dia. typ.

1/4 - 2ꢀ

UNC-2A thd. typ.

Nickel plated

brass nut

stainless steel stud

2.125 ꢀ.ꢀ31

[53.98 ꢀ.787ꢁ

4.5ꢀ ꢀ.ꢀ31

[114.3ꢀ ꢀ.787ꢁ

1.25 ꢀ.ꢀ62

[31.75 1.575ꢁ

3.ꢀ ꢀ.ꢀ31

[76.2ꢀ ꢀ.787ꢁ

55.58 ꢀ.787

[2.188 ꢀ.ꢀ31ꢁ

2.5ꢀ ꢀ.ꢀ1ꢀ

[63.5ꢀ ꢀ.254ꢁ

ꢀ.875 ꢀ.ꢀ1ꢀ

ꢀ.25ꢀ ꢀ.ꢀ31

ꢀ.955 ꢀ.ꢀ15

1.25 ꢀ.ꢀ62

[31.75 1.575ꢁ

[22.23 ꢀ.254ꢁ

[6.35 ꢀ.787ꢁ [24.26 ꢀ.381ꢁ

ꢀ.312 ꢀ.ꢀ31

[7.92 ꢀ.787ꢁ

3.ꢀ ꢀ.ꢀ1ꢀ

[76.2ꢀ ꢀ.254ꢁ

typ.

3.875 ꢀ.ꢀ1ꢀ

[98.42 ꢀ.254ꢁ

7.ꢀ ꢀ.ꢀ93 [177.8ꢀ 2.36ꢁ

Document Number: 30201

Revision: 11-Jul-07

For technical questions, contact: ww2bresistors@vishay.com

www.vishay.com

155

RH, NH

Wirewound Resistors, Military, MIL-PRF-18546 Qualified,

Type RE, Aluminum Housed, Chassis Mount

Vishay Dale

TECHNICAL SPECIFICATIONS

PARAMETER

UNIT

RH RESISTOR CHARACTERISTICS

100 for 0.1 Ω to 0.99 Ω, 50 for 1 Ω to 9.9 Ω, 20 for 10 Ω and above

1000 for RH/5, RH-10 and RH/25, 2000 for RH/50, 4500 for RH/100 and RH/250

5 × rated power for 5 s

Temperature Coefficient

Dielectric Withstanding Voltage

Short Time Overload

ppm/°C

V_AC

(P x R)^1/2

Maximum Working Voltage

Insulation Resistance

10 000 MΩ minimum dry, 1000 MΩ minimum after moisture test

5 minimum for RH-5 and RH-10, 10 minimum for all others

MIL-PRF-18546 type - meets requirements of ANSI J-STD-002

- 55 to + 250

Terminal Strength

Solderability

Operating Temperature Range

°C

POWER RATING

Vishay RH resistor wattage ratings are based on mounting to the following heat sink:

RH-5 and RH-10:

RH-25:

RH-50:

4" x 6" x 2" x 0.040" thick aluminum chassis (129 sq. in. surface area)

5" x 7" x 2" x 0.040" thick aluminum chassis (167 sq. in. surface area)

12" x 12" x 0.059" thick aluminum panel (291 sq. in. surface area)

12" x 12" x 0.125" thick aluminum panel (294 sq. in. surface area)

RH-100 and RH-250:

AMBIENT TEMPERATURE DERATING

Derating is required for ambient temperatures above 25 °C, see the following graph.

Curves A, B, C apply to operation of unmounted resistors. Curve D applies to all types when mounted to specified heat sink.

A = RH-5 and RH-10 size resistor, unmounted

B = RH-25 size resistor, unmounted

C = RH-50, RH-100 and RH-250 size resistor, unmounted

D = All types mounted to recommended aluminum heat sink

120

100

- 55 - 50

150

250

AMBIENT TEMPERATURE IN °C

Derating

REDUCED HEAT SINK DERATING:

100

Derating is also required when recommended heat sink

area is reduced.

A = RH-5 and RH-10 size resistor

B = RH-25 size resistor

C = RH-50, RH-100 and RH-250 size resistor

100

% OF RECOMMENDED HEAT SINK AREA

Heat Sink Derating

www.vishay.com

156

For technical questions, contact: ww2bresistors@vishay.com

Document Number: 30201

Revision: 11-Jul-07

RH, NH

Wirewound Resistors, Military, MIL-PRF-18546 Qualified,

Type RE, Aluminum Housed, Chassis Mount

Vishay Dale

MATERIAL SPECIFICATIONS

SPECIAL MODIFICATIONS

Element: Copper-nickel alloy or nickel-chrome alloy,

depending on resistance value

A number of special modifications to the aluminum housed

resistor style are available upon request. Special

modifications include:

Core: Ceramic, steatite or alumina, depending on physical

size

• Terminal configurations and materials

• Resistance values and tolerances

• Low resistance temperature coefficient (RTC)

• Housing configuration

Encapsulant: Silicone molded construction

Housing: Aluminum with hard anodic coating

End Caps: Stainless steel

Standard Terminals: For RH-5 through RH-50 size terminal

finish - Tin/lead is 60/40 Sn/Pb w/Nickel underplate and

Lead (Pb)-free is Ni/Pd/Au, finish is on copper clad steel core

terminal. For RH-100 and RH-250 terminals are threaded

stainless steel.

• Threaded mounting holes

• Preconditioning and other additional testing

Note:

APPLICABLE MIL SPECIFICATIONS

Military (RE) parts are only available with tin/lead finish

MIL-PRF-18546 is the military specification covering

aluminum housed, chassis mount, power resistors. VISHAY

RH and NH resistors are listed as qualified on the

MIL-PRF-18546 QPL.

Part Marking: DALE, model, wattage, value, tolerance, date

code

NH NON-INDUCTIVE

Models of equivalent physical and electrical specifications

are available with non-inductive (Aryton-Perry) winding.

They are identified by substituting the letter N for R in the

model number (NH-5, for example).

PERFORMANCE

TEST

CONDITIONS OF TEST

TEST LIMITS

Thermal Shock

Short Time Overload

Rated power applied until thermally stable, then a minimum of 15 min at - 55 °C

5 x rated power for 5 s

(0.5 % + 0.05 Ω) ΔR

1000 V_rmsfor RH-5, RH-10 and RH-25; 2000 V_rmsfor RH-50

4500 V_rmsfor RH-100 and RH-250; duration 1 min

Dielectric Withstanding

Voltage

(0.2 % + 0.05 Ω) ΔR

Temperature

250 °C for 2 h

(0.5 % + 0.05 Ω) ΔR

(1.0 % + 0.05 Ω) ΔR

(0.2 % + 0.05 Ω) ΔR

(1.0 % + 0.05 Ω) ΔR

Moisture Resistance

Shock, Specified Pulse

Vibration, High Frequency

Load Life

MIL-STD-202 Method 106, 7b not applicable

MIL-STD-202 Method 213, 100 g's for 6 ms, 10 shocks

Frequency varied 10 to 2000 Hz, 20 g peak, 2 directions 6 h each

1000 h at rated power, + 25 °C, 1.5 h “ON”, 0.5 h “OFF”

30 s, 5 pound pull test for RH-5 and RH-10, 10 pound pull test for other sizes,

torque test - 24 pound inch for RH-100 and 32 pound inch for RH-250

Terminal Strength

(0.2 % + 0.05 Ω) ΔR

Document Number: 30201

Revision: 11-Jul-07

For technical questions, contact: ww2bresistors@vishay.com

www.vishay.com

157

Legal Disclaimer Notice

Vishay

Disclaimer

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf

(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein

or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any

information provided herein to the maximum extent permitted by law. The product specifications do not expand or

otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed

therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this

document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless

otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such

applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting

from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding

products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000

Revision: 18-Jul-08

www.vishay.com

NH010R3900GC02 [VISHAY]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E