首页 |元器件品牌

P4KE75CA-E3/73 [VISHAY]

TVS DIODE 64.1V 103V DO204AL;
P4KE75CA-E3/73
型号： P4KE75CA-E3/73
厂家： VISHAY    VISHAY
描述：

TVS DIODE 64.1V 103V DO204AL

电视
文件： 总6页 (文件大小：82K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
P4KE6.8A thru P4KE540A  
Vishay General Semiconductor  
www.vishay.com  
®
TRANSZORB Transient Voltage Suppressors  
FEATURES  
• Glass passivated chip junction  
• Available in uni-directional and bi-directional  
• 400 W peak pulse power capability with a  
10/1000 μs waveform, repetitive rate (duty cycle):  
0.01 %  
• Excellent clamping capability  
DO-41 (DO-204AL)  
• Very fast response time  
• Low incremental surge resistance  
• Solder dip 275 °C max. 10 s, per JESD 22-B106  
• AEC-Q101 qualified  
• Material categorization: for definitions of compliance  
please see www.vishay.com/doc?99912  
PRIMARY CHARACTERISTICS  
VWM  
5.8 V to 459 V  
TYPICAL APPLICATIONS  
V
BR uni-directional  
6.8 V to 540 V  
6.8 V to 440 V  
400 W  
Use in sensitive electronics protection against voltage  
transients induced by inductive load switching and lighting  
on ICs, MOSFET, signal lines of sensor units for consumer,  
computer, industrial, automotive, and telecommunication.  
V
BR bi-directional  
PPPM  
PD  
1.5 W  
IFSM (uni-directional only)  
40 A  
MECHANICAL DATA  
TJ max.  
175 °C  
Case: DO-41 (DO-204AL), molded epoxy body over  
passivated chip  
Molding compound meets UL 94 V-0 flammability rating  
Polarity  
Uni-directional, bi-directional  
DO-41 (DO-204AL)  
Package  
Base P/N-E3  
Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified  
-
RoHS-compliant, commercial grade  
DEVICES FOR BI-DIRECTION APPLICATIONS  
For bi-directional types, use CA suffix (e.g. P4KE440CA).  
Electrical characteristics apply in both directions.  
Terminals: matte tin plated leads, solderable per  
J-STD-002 and JESD 22-B102  
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix  
meets JESD 201 class 2 whisker test  
Note  
•
P4KE250CA to P4KE540A and P4KE250A to P4KE440CA for  
commercial grade only  
Polarity: for uni-directional types the color band denotes  
cathode end, no marking on bi-directional types  
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)  
PARAMETER  
Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig.1)  
Peak pulse current with a 10/1000 μs waveform (1)  
SYMBOL  
PPPM  
IPPM  
LIMIT  
400  
UNIT  
W
See next table  
1.5  
A
Power dissipation on infinite heatsink at TL = 75 °C (fig. 5)  
Peak forward surge current 8.3 ms single half-sine wave uni-directional only (2)  
Maximum instantaneous forward voltage at 25 A for uni-directional only (3)  
Operating junction and storage temperature range  
PD  
W
IFSM  
40  
A
VF  
3.5/5.0  
V
TJ, TSTG  
- 55 to + 175  
°C  
Notes  
(1)  
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2  
8.3 ms single half-sine wave or equivalent square wave, duty cycle = 4 pulses per minute maximum  
VF = 3.5 V for P4KE220A and below; VF = 5.0 V for P4KE250A and above  
(2)  
(3)  
Revision: 04-Mar-2019  
Document Number: 88365  
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
P4KE6.8A thru P4KE540A  
Vishay General Semiconductor  
www.vishay.com  
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)  
BREAKDOWN  
MAXIMUM  
REVERSE  
LEAKAGE  
AT VWM  
MAXIMUM  
PEAK  
MAXIMUM  
CLAMPING  
VOLTAGE  
AT IPPM  
MAXIMUM  
TEMPERATURE  
COEFFICIENT  
AT VBR  
VOLTAGE  
TEST  
CURRENT  
IT  
STAND-OFF  
VOLTAGE  
VWM  
(1)  
DEVICE  
TYPE  
V
BR AT IT  
PULSE  
(V)  
CURRENT  
(3)  
(2)  
(mA)  
(V)  
ID  
IPPM  
VC (V)  
(%/°C)  
MIN.  
MAX.  
(μA)  
1000  
500  
200  
50  
(A)  
38.1  
35.4  
33.1  
29.9  
27.6  
25.6  
24.0  
22.0  
18.9  
17.8  
15.9  
14.4  
13.1  
12.0  
10.7  
9.7  
8.8  
8.0  
7.4  
6.7  
6.2  
5.7  
5.2  
4.7  
4.3  
3.9  
3.5  
3.2  
2.9  
2.6  
2.4  
2.2  
1.9  
1.8  
1.7  
1.6  
1.5  
1.2  
1.2  
P4KE6.8A  
P4KE7.5A  
P4KE8.2A  
P4KE9.1A  
P4KE10A  
P4KE11A  
P4KE12A  
P4KE13A  
P4KE15A  
P4KE16A  
P4KE18A  
P4KE20A  
P4KE22A  
P4KE24A  
P4KE27A  
P4KE30A  
P4KE33A  
P4KE36A  
P4KE39A  
P4KE43A  
P4KE47A  
P4KE51A  
P4KE56A  
P4KE62A  
P4KE68A  
P4KE75A  
P4KE82A  
P4KE91A  
P4KE100A  
P4KE110A  
P4KE120A  
P4KE130A  
P4KE150A  
P4KE160A  
P4KE170A  
P4KE180A  
P4KE200A  
P4KE220A  
P4KE250A  
P4KE300A  
P4KE350A  
P4KE400A  
P4KE440A  
P4KE480A  
P4KE510A  
P4KE540A  
6.45  
7.13  
7.79  
8.65  
9.5  
7.14  
7.88  
8.61  
9.55  
10.5  
11.6  
12.6  
13.7  
15.8  
16.8  
18.9  
21.0  
23.1  
25.2  
28.4  
31.5  
34.7  
37.8  
41.0  
45.2  
49.4  
53.6  
58.8  
65.1  
71.4  
78.8  
86.1  
95.5  
105  
116  
126  
137  
158  
168  
179  
189  
210  
231  
263  
315  
368  
420  
462  
504  
535  
10  
10  
10  
5.80  
6.40  
7.02  
7.78  
8.55  
9.40  
10.2  
11.1  
12.8  
13.6  
15.3  
17.1  
18.8  
20.5  
23.1  
25.6  
28.2  
30.8  
33.3  
36.8  
40.2  
43.6  
47.8  
53.0  
58.1  
64.1  
70.1  
77.8  
85.5  
94.0  
102  
111  
128  
136  
145  
154  
171  
185  
214  
256  
300  
342  
376  
408  
434  
459  
10.5  
11.3  
12.1  
13.4  
14.5  
15.6  
16.7  
18.2  
21.2  
22.5  
25.2  
27.7  
30.6  
33.2  
37.5  
41.4  
45.7  
49.9  
53.9  
59.3  
64.8  
70.1  
77.0  
85.0  
92.0  
103  
113  
125  
137  
152  
165  
179  
207  
219  
234  
246  
274  
328  
344  
414  
482  
548  
602  
658  
698  
740  
0.057  
0.061  
0.060  
0.068  
0.073  
0.075  
0.078  
0.081  
0.084  
0.086  
0.088  
0.090  
0.092  
0.094  
0.096  
0.097  
0.098  
0.099  
0.100  
0.101  
0.101  
0.102  
0.103  
0.104  
0.104  
0.105  
0.105  
0.106  
0.106  
0.107  
0.107  
0.107  
0.108  
0.108  
0.108  
0.108  
0.108  
0.108  
0.110  
0.110  
0.110  
0.110  
0.110  
0.110  
0.110  
0.110  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
10  
10.5  
11.4  
12.4  
14.3  
15.2  
17.1  
19.0  
20.9  
22.8  
25.7  
28.5  
31.4  
34.2  
37.1  
40.9  
44.7  
48.5  
53.2  
58.9  
64.6  
71.3  
77.9  
86.5  
95.0  
105  
114  
124  
143  
152  
162  
171  
190  
209  
237  
285  
333  
380  
418  
456  
485  
513  
5.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.00  
0.83  
0.73  
0.66  
0.61  
0.57  
0.54  
567  
Notes  
(1)  
(2)  
(3)  
(4)  
Pulse test: tp 50 ms  
Surge current waveform per fig. 3 and derate per fig. 2  
For bi-directional types with VWM of 10 V and less the ID limit is doubled  
All terms and symbols are consistent with ANSI/EEE CA62.35  
Revision: 04-Mar-2019  
Document Number: 88365  
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
P4KE6.8A thru P4KE540A  
Vishay General Semiconductor  
www.vishay.com  
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)  
PARAMETER  
SYMBOL  
VALUE  
66  
UNIT  
Typical thermal resistance, junction to lead  
Typical thermal resistance, junction to ambient LLead = 10 mm  
RJL  
°C/ W  
RJA  
100  
ORDERING INFORMATION (Example)  
PREFERRED PIN  
P4KE6.8A-E3/54  
P4KE6.8AHE3/54 (1)  
UNIT WEIGHT (g)  
PREFERRED PACKAGE CODE  
BASE QUANTITY  
DELIVERY MODE  
0.350  
54  
54  
5500  
5500  
13" diameter paper tape and reel  
13" diameter paper tape and reel  
0.350  
Note  
(1) AEC-Q101 qualified  
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)  
100  
150  
100  
50  
tr = 10 µs  
TJ = 25 °C  
Pulse Width (td)  
is defined as the Point  
where the Peak Current  
Decays to 50 % of IPPM  
Non-Repetitive Pulse  
Waveform shown in Fig. 3  
TA = 25 °C  
Peak Value  
IPPM  
10  
Half Value - IPP  
IPPM  
2
1
10/1000 µs Waveform  
as defined by R.E.A.  
td  
0.1  
0
0.1  
1
10  
100  
1000  
10 000  
1.0  
3.0  
4.0  
0
2.0  
t - Time (ms)  
td - Pulse Width (µs)  
Fig. 1 - Peak Pulse Power Rating Curve  
Fig. 3 - Pulse Waveform  
100  
75  
50  
25  
0
10 000  
1000  
100  
TJ = 25 °C  
f = 1.0 MHz  
Vsig = 50 mVp-p  
Measured at  
Zero Bias  
Measured at Stand-Off  
Voltage VWM  
10  
0
25  
50  
75  
100  
125  
150  
175  
200  
1
10  
100  
1000  
TJ - Initial Temperature (°C)  
VBR - Breakdown Voltage (V)  
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature  
Fig. 4 - Typical Junction Capacitance Uni-Directional  
Revision: 04-Mar-2019  
Document Number: 88365  
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
P4KE6.8A thru P4KE540A  
Vishay General Semiconductor  
www.vishay.com  
100  
75  
50  
25  
0
100  
10  
1
60 Hz  
Resistive or  
Inductive Load  
L = 0.375" (9.5 mm)  
Lead Lengths  
0
25  
50  
75  
100  
125  
150  
175  
200  
0.001  
0.01  
0.1  
1
10  
100  
1000  
TL - Lead Temperature (°C)  
tp - Pulse Duration (s)  
Fig. 5 - Power Derating Curve  
Fig. 7 - Typical Transient Thermal Impedance  
100  
TJ = TJ Max.  
8.3 ms Single Half Sine-Wave  
10  
1
10  
Number of Cycles at 60 Hz  
100  
Fig. 6 - Maximum Non-Repetitive Forward Surge Current  
Uni-Directional Only  
Revision: 04-Mar-2019  
Document Number: 88365  
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
P4KE6.8A thru P4KE540A  
Vishay General Semiconductor  
www.vishay.com  
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)  
DO-41 (DO-204AL)  
1.0 (25.4)  
MIN.  
0.107 (2.7)  
0.080 (2.0)  
DIA.  
0.205 (5.2)  
0.160 (4.1)  
1.0 (25.4)  
MIN.  
0.034 (0.86)  
0.028 (0.71)  
DIA.  
Revision: 04-Mar-2019  
Document Number: 88365  
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
Legal Disclaimer Notice  
www.vishay.com  
Vishay  
Disclaimer  
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE  
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.  
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,  
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other  
disclosure relating to any product.  
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or  
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all  
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,  
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular  
purpose, non-infringement and merchantability.  
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical  
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements  
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product  
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in  
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating  
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.  
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited  
to the warranty expressed therein.  
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and  
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of  
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.  
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website  
or for that of subsequent links.  
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining  
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.  
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please  
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by  
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.  
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED  
Revision: 09-Jul-2021  
Document Number: 91000  
1

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明