P4SMA39CA-M3/61 [VISHAY]
TVS DIODE 33.3V 53.9V DO214AC;
| 型号： | P4SMA39CA-M3/61 |
| 厂家： | 
VISHAY |
| 描述： | TVS DIODE 33.3V 53.9V DO214AC 电视 |
| 文件： | 总6页 (文件大小：102K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
P4SMA Series
Vishay General Semiconductor
www.vishay.com
®
Surface-Mount TRANSZORB Transient Voltage Suppressors
FEATURES
Available
• Low profile package
• Ideal for automated placement
• Glass passivated chip junction
• Available in unidirectional and bidirectional
• 400 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate
(duty cycle): 0.01 % (300 W above 91 V)
Available
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
SMA (DO-214AC)
Cathode
Anode
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
(unidirectional)
(bidirectional)
• AEC-Q101 qualified available
- Automotive ordering code: P/NHE3 or P/NHM3
LINKS TO ADDITIONAL RESOURCES
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
3
D
3D Models
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, and telecommunication.
PRIMARY CHARACTERISTICS
VWM (unidirectional)
WM (bidirectional)
BR (unidirectional)
5.8 V to 459 V
V
5.8 V to 185 V
6.8 V to 540 V
6.8 V to 220 V
400 W, 300 W
3.3 W
MECHANICAL DATA
V
Case: SMA (DO-214AC)
VBR (bidirectional)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Base P/N-M3 - halogen-free, RoHS-compliant, commercial
grade
PPPM
PD
IFSM (uni-directional only)
40 A
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
Base P/NHM3_X - halogen-free, RoHS-compliant, and
AEC-Q101 qualified
TJ max.
150 °C
Polarity
Unidirectional, bidirectional
SMA (DO-214AC)
(“_X” denotes revision code e.g. A, B, ...)
Package
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3, M3, HE3, and HM3 suffix meets JESD 201 class 2
whisker test
DEVICES FOR BIDIRECTION APPLICATIONS
For bidirectional devices use CA suffix (e.g. P4SMA10CA).
Electrical characteristics apply in both directions.
Polarity: for unidirectional types the band denotes cathode
end, no marking on bidirectional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
VALUE
400
UNIT
W
Peak power dissipation with a 10/1000 μs waveform (1)(2) (fig. 1)
Peak pulse current with a 10/1000 μs waveform (1) (fig. 3)
Power dissipation on infinite heatsink at TA = 50 °C
Peak forward surge current 8.3 ms single half sine-wave unidirectional only (2)
Operating junction and storage temperature range
IPPM
See next table
3.3
A
PD
W
IFSM
40
A
TJ, TSTG
-65 to +150
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2. Rating is 300 W above 91 V
Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal
(2)
Revision: 30-Jun-2021
Document Number: 88367
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P4SMA Series
Vishay General Semiconductor
www.vishay.com
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
BREAKDOWN
MAXIMUM MAXIMUM
DEVICE
MARKING
CODE
MAXIMUM
MAXIMUM
VOLTAGE
TEST
CURRENT
IT
STAND-OFF REVERSE
PEAK
PULSE
CLAMPING TEMPERATURE
(1)
PART
V
BR AT IT
(V)
VOLTAGE
VWM
LEAKAGE
AT VWM
VOLTAGE
AT IPPM
VC (V)
COEFFICIENT
OF VBR
NUMBER
CURRENT
(4)
(2)
(mA)
(V)
ID
IPPM
(%/°C)
UNI
BI
MIN. MAX.
(μA)
1000
500
200
50
(A)
38.1
35.4
33.1
29.9
27.6
25.6
24.0
22.0
18.9
17.8
15.9
14.4
13.1
12.0
10.7
9.7
8.8
8.0
7.4
6.7
6.2
5.7
5.2
4.7
4.3
3.9
3.5
3.2
2.2
2.0
1.8
1.7
1.4
1.4
1.3
1.2
(+)P4SMA6.8A 6V8A 6V8C 6.45
(+)P4SMA7.5A 7V5A 7V5C 7.13
(+)P4SMA8.2A 8V2A 8V2C 7.79
(+)P4SMA9.1A 9V1A 9V1C 8.65
7.14
7.88
8.61
9.55
10.5
11.6
12.6
13.7
15.8
16.8
18.9
21.0
23.1
25.2
28.4
31.5
34.7
37.8
41.0
45.2
49.4
53.6
58.8
65.1
71.4
78.8
86.1
95.5
105
116
126
137
158
168
179
189
210
231
263
315
368
420
462
504
535
567
10
10
10
5.80
6.40
7.02
7.78
8.55
9.40
10.2
11.1
12.8
13.6
15.3
17.1
18.8
20.5
23.1
25.6
28.2
30.8
33.3
36.8
40.2
43.6
47.8
53.0
58.1
64.1
70.1
77.8
85.5
94.0
102
111
128
136
145
154
171
185
214
256
300
342
376
408
434
459
10.5
11.3
12.1
13.4
14.5
15.6
16.7
18.2
21.2
22.5
25.2
27.7
30.6
33.2
37.5
41.4
45.7
49.9
53.9
59.3
64.8
70.1
77.0
85.0
92.0
104
113
125
137
152
165
179
207
219
234
246
274
328
344
414
482
548
602
658
698
740
0.057
0.061
0.065
0.068
0.073
0.075
0.078
0.081
0.084
0.086
0.089
0.090
0.092
0.094
0.096
0.097
0.098
0.099
0.100
0.101
0.101
0.102
0.103
0.104
0.104
0.105
0.105
0.106
0.106
0.107
0.107
0.107
0.108
0.108
0.108
0.108
0.108
0.108
0.110
0.110
0.110
0.110
0.110
0.110
0.110
0.110
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
(+)P4SMA10A
(+)P4SMA11A
(+)P4SMA12A
(+)P4SMA13A
(+)P4SMA15A
(+)P4SMA16A
(+)P4SMA18A
(+)P4SMA20A
(+)P4SMA22A
(+)P4SMA24A
(+)P4SMA27A
(+)P4SMA30A
(+)P4SMA33A
(+)P4SMA36A
(+)P4SMA39A
(+)P4SMA43A
(+)P4SMA47A
(+)P4SMA51A
(+)P4SMA56A
(+)P4SMA62A
(+)P4SMA68A
(+)P4SMA75A
(+)P4SMA82A
(+)P4SMA91A
10A 10C
11A 11C
12A 12C
13A 13C
15A 15C
16A 16C
18A 18C
20A 20C
22A 22C
24A 24C
27A 27C
30A 30C
33A 33C
36A 36C
39A 39C
43A 43C
47A 47C
51A 51C
56A 56C
62A 62C
68A 68C
75A 75C
82A 82C
91A 91C
9.5
10
10.5
11.4
12.4
14.3
15.2
17.1
19.0
20.9
22.8
25.7
28.5
31.4
34.2
37.1
40.9
44.7
48.5
53.2
58.9
64.6
71.3
77.9
86.5
5.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1.0
(+)P4SMA100A 100A 100C 95.0
(+)P4SMA110A 110A 110C 105
(+)P4SMA120A 120A 120C 114
(+)P4SMA130A 130A 130C 124
(+)P4SMA150A 150A 150C 143
(+)P4SMA160A 160A 160C 152
(+)P4SMA170A 170A 170C 162
(+)P4SMA180A 180A 180C 171
(+)P4SMA200A 200A 200C 190
(+)P4SMA220A 220A 220C 209
1.1
0.91
0.87
0.73
0.62
0.55
0.50
0.46
0.43
0.41
P4SMA250A
P4SMA300A
P4SMA350A
P4SMA400A
P4SMA440A
P4SMA480A
P4SMA510A
P4SMA540A
250A
300A
350A
400A
440A
480A
510A
540A
-
-
-
-
-
-
-
-
237
285
333
380
418
456
485
513
Notes
(1)
(2)
(3)
(4)
(5)
(+)
Pulse test: tp ≤ 50 ms
Surge current waveform per fig. 3 and derate per fig. 2
All terms and symbols are consistent with ANSI/IEEE CA62.35
For bidirectional types with VR of 10 V and less, the ID limit is doubled
VF = 3.5 V at IF = 25 A (unidirectional only)
Underwriters Laboratory Recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number
E136766 for both unidirectional and bidirectional device
Revision: 30-Jun-2021
Document Number: 88367
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P4SMA Series
Vishay General Semiconductor
www.vishay.com
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance, junction to ambient air (1)
SYMBOL
VALUE
120
UNIT
RθJA
°C/ W
Typical thermal resistance, junction to lead
RθJL
30
Note
(1)
Mounted on minimum recommended pad layout
ORDERING INFORMATION (Example)
VOLTAGE RANGE
(V)
UNIT WEIGHT
(g)
PACKAGE
CODE
BASE
QUANTITY
PREFERRED P/N
DELIVERY MODE
UNI -
BI -
P4SMA6.8A-E3/61
0.064
0.064
0.064
0.064
6.8 to 220
6.8 to 540
6.8 to 220
6.8 to 540
6.8 to 220
6.8 to 220
6.8 to 220
6.8 to 220
61
61
5A
5A
1800
1800
7500
7500
7" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
13" diameter plastic tape and reel
P4SMA6.8A-M3/61
P4SMA6.8A-E3/5A
P4SMA6.8A-M3/5A
P4SMA6.8AHE3_A/H (1)
P4SMA6.8AHM3_A/H (1)
P4SMA6.8AHE3_A/I (1)
P4SMA6.8AHM3_A/I (1)
P4SMA250AHM3_B/H (2)
P4SMA250AHM3_B/I (2)
0.064
0.064
6.8 to 220
6.8 to 220
6.8 to 220
6.8 to 220
H
I
1800
7500
7" diameter plastic tape and reel
13" diameter plastic tape and reel
0.064
0.064
250 to 540
250 to 540
-
-
H
I
1800
7500
7" diameter plastic tape and reel
13" diameter plastic tape and reel
Notes
(1)
_A is available for P4SMA6.8(C)A to P4SMA220(C)A, AEC-Q101 qualified
_B is available for P4SMA250A to P4SMA540A, AEC-Q101 qualified
(2)
Revision: 30-Jun-2021
Document Number: 88367
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P4SMA Series
Vishay General Semiconductor
www.vishay.com
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
100
10
1
10 000
Non-Repetitive Pulse
Waveform shown in Fig. 3
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
Measured at
Stand-Off
Voltage VWM
T
A = 25 °C
1000
100
10
P4SMA6.8A -
P4SMA91A
Uni-Directional
P4SMA100A -
P4SMA540A
Bi-Directional
0.2 x 0.2" (5.0 x 5.0 mm)
Copper Pad Areas
0.1
0.1 µs
1.0 µs
10 µs
100 µs
1.0 ms
10 ms
1
10
100
200
td - Pulse Width (s)
VBR - Breakdown Voltage (V)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 4 - Typical Junction Capacitance
100
75
1000
100
10
1
50
25
0
0.001
0.01
0.1
1
10
100
1000
0
25
50
75
100 125
150 175
200
TJ - Initial Temperature (°C)
tp - Pulse Duration (s)
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
Fig. 5 - Typical Transient Thermal Impedance
150
200
TJ = 25 °C
Pulse Width (td)
TJ = TJ max.
tr = 10 µs
8.3 ms Single Half Sine-Wave
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
Peak Value
IPPM
100
50
100
50
0
IPP
Half Value -
IPPM
2
10/1000 µs Waveform
as defined by R.E.A.
td
10
1.0
3.0
4.0
0
2.0
1
5
10
50
100
t - Time (ms)
Number of Cycles at 60 Hz
Fig. 3 - Pulse Waveform
Fig. 6 - Maximum Non-Repetitive Forward Surge Current
Uni-Directional Use Only
Revision: 30-Jun-2021
Document Number: 88367
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P4SMA Series
Vishay General Semiconductor
www.vishay.com
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
SMA (DO-214AC)
Cathode Band
Mounting Pad Layout
0.074 (1.88)
MAX.
0.066 (1.68)
MIN.
0.110 (2.79)
0.100 (2.54)
0.065 (1.65)
0.049 (1.25)
0.177 (4.50)
0.157 (3.99)
0.060 (1.52)
MIN.
0.012 (0.305)
0.006 (0.152)
0.208 (5.28)
REF.
0.090 (2.29)
0.078 (1.98)
0.060 (1.52)
0.030 (0.76)
0.008 (0.203)
0 (0)
0.208 (5.28)
0.194 (4.93)
Revision: 30-Jun-2021
Document Number: 88367
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明