首页 |元器件品牌

P6KE250CA-E3/54 [VISHAY]

TVS DIODE 214V 344V DO204AC;
P6KE250CA-E3/54
型号： P6KE250CA-E3/54
厂家： VISHAY    VISHAY
描述：

TVS DIODE 214V 344V DO204AC

电视
文件： 总6页 (文件大小：85K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
P6KE6.8A thru P6KE540A  
Vishay General Semiconductor  
www.vishay.com  
®
TRANSZORB Transient Voltage Suppressors  
FEATURES  
• Glass passivated chip junction  
• Available in uni-directional and bi-directional  
• 600 W peak pulse power capability with a  
10/1000 μs waveform, repetitive rate (duty cycle):  
0.01 %  
• Excellent clamping capability  
DO-15 (DO-204AC)  
• Very fast response time  
• Low incremental surge resistance  
• Solder dip 275 °C max. 10 s, per JESD 22-B106  
• AEC-Q101 qualified  
• Material categorization: for definitions of compliance  
PRIMARY CHARACTERISTICS  
please see www.vishay.com/doc?99912  
VWM  
5.8 V to 459 V  
6.8 V to 540 V  
6.8 V to 440 V  
600 W  
TYPICAL APPLICATIONS  
V
BR uni-directional  
Use in sensitive electronics protection against voltage  
transients induced by inductive load switching and lighting  
on ICs, MOSFET, signal lines of sensor units for consumer,  
computer, industrial, automotive, and telecommunication.  
V
BR bi-directional  
PPPM  
PD  
5.0 W  
I
FSM (uni-directional only)  
100 A  
TJ max.  
175 °C  
MECHANICAL DATA  
Polarity  
Uni-directional, bi-directional  
DO-15 (DO-204AC)  
Case: DO-15 (DO-204AC)  
Molded epoxy over passivated chip  
Package  
Molding compound meets UL 94 V-0 flammability rating  
Base P/N-E3 - RoHS compliant, commercial grade  
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified  
Terminals: matte tin plated leads, solderable per  
J-STD-002 and JESD 22-B102  
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix  
meets JESD 201 class 2 whisker test  
DEVICES FOR BI-DIRECTION APPLICATIONS  
For bi-directional types, use CA suffix (e.g. P6KE440CA).  
Electrical characteristics apply in both directions.  
Note  
•
P6KE250A to P6KE540A and P6KE250CA to P6KE440CA for  
commercial grade only  
Polarity: for uni-directional types the color band denotes  
cathode end, no marking on bi-directional types  
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)  
PARAMETER  
SYMBOL  
PPPM  
IPPM  
VALUE  
600  
UNIT  
W
Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1)  
Peak pulse current with a 10/1000 μs waveform (1)  
See next table  
5.0  
A
Power dissipation on infinite heatsink at TL = 75 °C (fig. 5)  
Peak forward surge current 8.3 ms single half sine-wave (2)  
Maximum instantaneous forward voltage at 50 A for uni-directional only (3)  
Operating junction and storage temperature range  
PD  
W
IFSM  
100  
A
VF  
3.5/5.0  
V
TJ, TSTG  
- 55 to + 175  
°C  
Notes  
(1)  
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2  
Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum  
VF = 3.5 V for P6KE220A and below; VF = 5.0 V for P6KE250A and above  
(2)  
(3)  
Revision: 03-Mar-2020  
Document Number: 88369  
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
P6KE6.8A thru P6KE540A  
Vishay General Semiconductor  
www.vishay.com  
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)  
BREAKDOWN  
VOLTAGE  
MAXIMUM  
MAXIMUM  
REVERSE  
LEAKAGE  
MAXIMUM  
CLAMPING  
VOLTAGE  
AT IPPM  
MAXIMUM  
TEMPERATURE  
COEFFICIENT  
AT VBR  
TEST  
CURRENT  
IT  
STAND-OFF  
VOLTAGE  
VWM  
PEAK  
PULSE  
(1)  
VBR AT IT  
DEVICE TYPE  
(V)  
CURRENT  
(3)  
AT VWM  
(2)  
(mA)  
(V)  
IPPM  
ID (μA)  
VC (V)  
(%/°C)  
MIN.  
MAX.  
(A)  
57.1  
53.1  
49.6  
44.8  
41.4  
38.5  
35.9  
33.0  
28.3  
26.7  
23.8  
21.7  
19.6  
18.1  
16.0  
14.5  
13.1  
12.0  
11.1  
10.1  
9.3  
8.6  
7.8  
7.1  
6.5  
5.8  
5.3  
4.8  
4.4  
3.9  
3.6  
3.4  
2.9  
2.7  
2.6  
2.4  
2.2  
(+)P6KE6.8A  
(+)P6KE7.5A  
(+)P6KE8.2A  
(+)P6KE9.1A  
(+)P6KE10A  
(+)P6KE11A  
(+)P6KE12A  
(+)P6KE13A  
(+)P6KE15A  
(+)P6KE16A  
(+)P6KE18A  
(+)P6KE20A  
(+)P6KE22A  
(+)P6KE24A  
(+)P6KE27A  
(+)P6KE30A  
(+)P6KE33A  
(+)P6KE36A  
(+)P6KE39A  
(+)P6KE43A  
(+)P6KE47A  
(+)P6KE51A  
(+)P6KE56A  
(+)P6KE62A  
(+)P6KE68A  
(+)P6KE75A  
(+)P6KE82A  
(+)P6KE91A  
(+)P6KE100A  
(+)P6KE110A  
(+)P6KE120A  
(+)P6KE130A  
(+)P6KE150A  
(+)P6KE160A  
(+)P6KE170A  
(+)P6KE180A  
(+)P6KE200A  
(+)P6KE220A  
(+)P6KE250A  
(+)P6KE300A  
(+)P6KE350A  
(+)P6KE400A  
(+)P6KE440A  
P6KE480A  
P6KE510A  
P6KE540A  
6.45  
7.13  
7.79  
8.65  
9.50  
10.5  
11.4  
12.4  
14.3  
15.2  
17.1  
19.0  
20.9  
22.8  
25.7  
28.5  
31.4  
34.2  
37.1  
40.9  
44.7  
48.5  
53.2  
58.9  
64.6  
71.3  
77.9  
86.5  
95.0  
105  
114  
124  
143  
152  
162  
171  
190  
209  
237  
285  
333  
380  
418  
456  
485  
513  
7.14  
7.88  
8.61  
9.55  
10.5  
11.6  
12.6  
13.7  
15.8  
16.8  
18.9  
21.0  
23.1  
25.2  
28.4  
31.5  
34.7  
37.8  
41.0  
45.2  
49.4  
53.6  
58.8  
65.1  
71.4  
78.8  
86.1  
95.5  
105  
116  
126  
137  
158  
168  
179  
189  
210  
231  
263  
315  
368  
420  
462  
504  
535  
10  
10  
10  
5.80  
6.40  
7.02  
7.78  
8.55  
9.40  
10.2  
11.1  
12.8  
13.6  
15.3  
17.1  
18.8  
20.5  
23.1  
25.6  
28.2  
30.8  
33.3  
36.8  
40.2  
43.6  
47.8  
53.0  
58.1  
64.1  
70.1  
77.8  
85.5  
94.0  
102  
111  
128  
136  
145  
154  
171  
185  
214  
256  
300  
342  
376  
408  
434  
459  
1000  
500  
200  
50  
10.5  
11.3  
12.1  
13.4  
14.5  
15.6  
16.7  
18.2  
21.2  
22.5  
25.2  
27.7  
30.6  
33.2  
37.5  
41.4  
45.7  
49.9  
53.9  
59.3  
64.8  
70.1  
77.0  
85.0  
92.0  
103  
113  
125  
137  
152  
165  
179  
207  
219  
234  
246  
274  
328  
344  
414  
482  
548  
602  
658  
698  
740  
0.057  
0.061  
0.065  
0.068  
0.073  
0.075  
0.078  
0.081  
0.084  
0.086  
0.088  
0.090  
0.092  
0.094  
0.096  
0.097  
0.098  
0.099  
0.100  
0.101  
0.101  
0.102  
0.103  
0.104  
0.104  
0.105  
0.105  
0.106  
0.106  
0.107  
0.107  
0.107  
0.108  
0.108  
0.108  
0.108  
0.108  
0.108  
0.110  
0.110  
0.110  
0.110  
0.110  
0.110  
0.110  
0.110  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
10  
5.0  
5.0  
5.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.0  
1.8  
1.7  
1.4  
1.2  
1.1  
1.00  
0.91  
0.86  
0.81  
567  
Notes  
(1)  
(2)  
(3)  
(4)  
(+)  
Pulse test: tp ≤ 50 ms  
Surge current waveform per fig. 3 and derate per fig. 2  
For bi-directional types with VWM of 10 V and less the ID limit is doubled  
All terms and symbols are consistent with ANSI/EEE CA62.35  
Underwriters laboratory recognition for the classification of protectors (QVGQ2) under the UL standard for safety 497B and file number  
E136766 for both uni-directional and bi-directional devices  
Revision: 03-Mar-2020  
Document Number: 88369  
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
P6KE6.8A thru P6KE540A  
Vishay General Semiconductor  
www.vishay.com  
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)  
PARAMETER  
SYMBOL  
VALUE  
20  
UNIT  
Typical thermal resistance, junction to lead  
Typical thermal resistance, junction to ambient  
RθJL  
°C/ W  
RθJA  
75  
ORDERING INFORMATION (Example)  
PREFERRED PIN  
P6KE6.8A-E3/54  
P6KE6.8AHE3/54 (1)  
UNIT WEIGHT (g)  
PREFERRED PACKAGE CODE  
BASE QUANTITY  
DELIVERY MODE  
0.432  
54  
54  
4000  
4000  
13" diameter paper tape and reel  
13" diameter paper tape and reel  
0.432  
Note  
(1) AEC-Q101 qualified  
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)  
100  
10  
1
150  
TJ = 25 °C  
Pulse Width (td)  
is defined as the Point  
where the Peak Current  
decays to 50 % of IPPM  
Non-Repetitive Pulse  
Waveform shown in Fig. 3  
TA = 25 °C  
tr = 10 µs  
Peak Value  
IPPM  
100  
50  
0
Half Value - IPP  
IPPM  
2
10/1000 µs Waveform  
as defined by R.E.A.  
td  
0.1  
0.1 µs  
100 µs  
d - Pulse Width (s)  
1.0 ms  
10 ms  
1.0  
3.0  
4.0  
1.0 µs  
0
2.0  
10 µs  
t
t - Time (ms)  
Fig. 1 - Peak Pulse Power Rating Curve  
Fig. 3 - Pulse Waveform  
100  
6000  
1000  
Measured at  
Zero Bias  
75  
50  
TJ = 25 °C  
f = 1.0 MHz  
Vsig = 50 mVp-p  
100  
10  
Measured at Stand-Off  
Voltage VWM  
25  
0
0
25  
50  
75  
100  
125  
150 175  
200  
1.0  
10  
VBR - Breakdown Voltage (V)  
100  
200  
TJ - Initial Temperature (°C)  
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature  
Fig. 4 - Typical Junction Capacitance Uni-Directional  
Revision: 03-Mar-2020  
Document Number: 88369  
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
P6KE6.8A thru P6KE540A  
Vishay General Semiconductor  
www.vishay.com  
6
5
100  
60 Hz  
Resistive or  
Inductive Load  
4
3
10  
L = 0.375" (9.5 mm)  
Lead Lengths  
2
1
0
1
0.1  
0.001  
0
25  
50  
75  
100 125  
150  
175  
200  
0.01  
0.1  
1
10  
100  
1000  
TL - Lead Temperature (°C)  
tp - Pulse Duration (s)  
Fig. 5 - Power Derating Curve  
Fig. 7 - Typical Transient Thermal Impedance  
200  
TJ = TJ max.  
8.3 ms Single Half Sine-Wave  
100  
50  
Uni-Directional Only  
10  
1
5
10  
50  
100  
Number of Cycles at 60 Hz  
Fig. 6 - Maximum Non-Repetitive Forward Surge Current  
Revision: 03-Mar-2020  
Document Number: 88369  
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
P6KE6.8A thru P6KE540A  
Vishay General Semiconductor  
www.vishay.com  
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)  
DO-15 (DO-204AC)  
0.034 (0.86)  
0.028 (0.71)  
DIA.  
1.0 (25.4)  
MIN.  
0.242 (6.15)  
0.258 (6.55)  
0.130 (3.3)  
0.138 (3.5)  
DIA.  
1.0 (25.4)  
MIN.  
Note  
•
Dimensions of mold length and diameter do not include mold flash and gate burr, mold flash shall not exceed 0.015 inch per side. These  
dimensions are measured at the outermost extreme of the plastic body  
APPLICATION NOTES  
• This P6KE TVS series is a low cost commercial product for  
use in applications where large voltage transients can  
permanently damage voltage-sensitive components.  
• In some instances, the thermal effect (see Vc Clamping  
Voltage) may be responsible for 50 % to 70 % of the  
observed voltage differential when subjected to high  
current pulses for several duty cycles, thus making a  
maximum impedance specification insignificant.  
• The P6KE series device types are designed in a small  
package size where power and space is a consideration.  
They are characterized by their high surge capability,  
extremely fast response time, and low impedance, (Ron).  
Because of the unpredictable nature of transients, and the  
variation of the impedance with respect to these  
transients, impedance, per se, is not specified as a  
parametric value. However, a minimum voltage at low  
current conditions (BV) and a maximum clamping voltage  
(Vc) at a maximum peak pulse current is specified.  
• In case of a severe current overload or abnormal transient  
beyond the maximum ratings, the Transient Voltage  
Suppressor will initially fail ‘short’ thus tripping the  
system’s circuit breaker or fuse while protecting the entire  
circuit. Curves depicting clamping voltage vs. various  
current pulses are available from the factory. Extended  
power curves vs. pulse time are also available.  
Revision: 03-Mar-2020  
Document Number: 88369  
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
Legal Disclaimer Notice  
www.vishay.com  
Vishay  
Disclaimer  
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE  
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.  
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,  
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other  
disclosure relating to any product.  
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or  
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all  
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,  
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular  
purpose, non-infringement and merchantability.  
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical  
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements  
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product  
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in  
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating  
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.  
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited  
to the warranty expressed therein.  
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and  
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of  
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.  
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website  
or for that of subsequent links.  
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining  
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.  
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please  
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.  
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by  
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.  
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED  
Revision: 09-Jul-2021  
Document Number: 91000  
1

相关型号：

SI9130DB

 5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

 SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

 Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

 Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

 Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

 500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明