PAT0805E1350BST1 [VISHAY]

RESISTOR, THIN FILM, 0.2 W, 0.1 %, 25 ppm, 135 ohm, SURFACE MOUNT, 0805, CHIP, GREEN;


型号：	PAT0805E1350BST1
厂家：	VISHAY
描述：	RESISTOR, THIN FILM, 0.2 W, 0.1 %, 25 ppm, 135 ohm, SURFACE MOUNT, 0805, CHIP, GREEN 电阻器
文件：	总4页 (文件大小：112K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PAT

www.vishay.com

Vishay Dale Thin Film

Precision Automotive Thin Film Chip Resistors,

AEC-Q200 Qualified, 2 kV ESD Rating

FEATURES

• Resistance range: 2.5  to 3 M

• AEC-Q200 qualified

• AEC-Q200 ESD rated class 1C (2 kV)

• Laser trimmed to any value

• Moisture resistant to MIL-STD-202, method 202

• Tantalum nitride resistor film on high purity

alumina substrate

These chip resistors are available in wraparound

terminations styles in 8 case sizes. They incorporate self

passivated enhanced tantalum nitride resistor film to give

superior performance on moisture resistance, electrostatic

discharge, voltage coefficient, power handling and

resistance stability. The terminations consist of an adhesion

layer, a leach resistant nickel barrier, and solder coating

(lead (Pb)-free). This product will out-perform all

requirements of AEC-Q200.

• 100 % visual inspected per MIL-PRF-55342

• Laser-trimmed tolerances to 0.1 %

• Load life stability < 0.05 % at 1000 h at 70 °C

• Very low noise and voltage coefficient

(< -30 dB, < 0.1 ppm/V)

• Sulfur resistant (per ASTM B809-95 humid vapor test)

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

CONSTRUCTION

Tantalum Nitride

Resistive Film

Passivation

TYPICAL PERFORMANCE

Solder

Coating

ABSOLUTE

Nickel Barrier

TCR

TOL.

High Purity

Alumina Substrate

Adhesion Layer

0.1

STANDARD ELECTRICAL SPECIFICATIONS

TEST

SPECIFICATIONS

CONDITIONS

Material

Tantalum nitride

2.5  to 3 M

Resistance Range

TCR: Absolute

25 ppm/°C to 100 ppm/°C

0.1 % to 1.0 %

0.05 %

-55 °C to +125 °C

Tolerance: Absolute

Stability: Absolute

Stability: Ratio

+25 °C

2000 h at 70 °C rated power

Not applicable

Less than 0.1 ppm/V

75 V to 200 V

Voltage Coefficient

Working Voltage

Operating Temperature Range

Storage Temperature Range

Noise

-55 °C to +155 °C

< -30 dB

Shelf Life Stability: Absolute

100 ppm

1 year at 25 °C

COMPONENT RATINGS

CASE SIZE

POWER RATING (mW)

WORKING VOLTAGE (V)

RESISTANCE RANGE ()

20 to 51K

0402

150

200

400

750

800

1000

0603

2.5 to 130K

10 to 301K

10 to 1M

0805

100

200

150

200

1206

1505

10 to 1M

2208

10 to 1.75M

10 to 2M

2010

2512

10 to 3M

Revision: 01-Feb-17

Document Number: 60024

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PAT

www.vishay.com

Vishay Dale Thin Film

DIMENSIONS in inches

CASE SIZE

0402

0603

0.042 0.008

0.064 0.006

0.080 0.006

0.126 0.008

0.155 0.007

0.209 0.009

0.230 0.007

0.259 0.009

0.022 0.005

0.032 0.005

0.050 0.005

0.063 0.005

0.050 0.005

0.098 0.005

0.075 0.005

0.124 0.005

0.015 0.003

0.010 0.005

0.012 0.005

0.015 0.005

0.010 0.005

0.015 0.005

0805

1206

1505

2010

2208

0.020 + 0.005 / - 0.010 0.020 + 0.005 / - 0.010

0.015 0.005

0.020 0.005

0.015 0.005

0.020 0.005

2512

ENVIRONMENTAL TESTS (Vishay Performance vs. AEC-Q200 Requirements)

LIMITS

TYPICAL VISHAY

ENVIRONMENTAL TEST

CONDITIONS

PER AEC-Q200 PERFORMANCE

Resistance Temperature Characteristic

Max. Ambient Temp. at Rated Wattage

Max. Ambient Temp. at Power Derating

-55 °C to +125 °C

50 ppm/°C

+70 °C

+150 °C

0.1 %

35 ppm/°C

+70 °C

+150 °C

High Temperature Storage

Temperature Cycling

Moisture Resistance

Biased Humidity

R

MIL-STD-202, 108, 1000 h at 125 °C

JESD22, JA-104, 1000 cycles, -55 °C to +125 °C

MIL-STD-202, 106

+ 0.016 %

+ 0.013 %

+ 0.0010 %

+ 0.004 %

+ 0.0220 %

+ 0.004 %

+ 0.0030 %

+ 0.0150 %

- 0.032 %

Acceptable

+ 0.009 %

Acceptable

0.15 %

0.20 %

0.10 %

0.1 %

R

MIL-STD-202, 103, 1000 h at 85 °C, 85 % RH, 10 % P

MIL-STD-202, 108 at 125 °C, 1000 h

MIL-STD-202, method 213, condition C

MIL-STD-202 method 204, 10 Hz to 2 kHz

MIL-STD-202 method 210, condition D

AEC-Q200-002 at 2 kV, human body

J-STD-002, method B and B1

Life

R

Mechanical Shock

Vibration

R

0.1 %

R

0.1 %

Resistance to Soldering Heat

Electrostatic Discharge

Solderability

R

0.10 %

95 %

R

Visual

R

Terminal Strength

Flame Retardance

AEC-Q200-006 at 1 kg for 60 s

0.10 %

Visual

AEC-Q200-001 para 4.0

DERATING CURVE

100

125

155

Ambient Temperature °C

Revision: 01-Feb-17

Document Number: 60024

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PAT

www.vishay.com

Vishay Dale Thin Film

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: PAT1206E1002BST1

GLOBAL CASE

TCR

RESISTANCE

TOLERANCE

TERMINATION

PACKAGING

MODEL

SIZE

CHARACTERISTIC

PAT

0402

0603

0805

1206

1505

2010

2208

2512

E = 25 ppm/°C

H = 50 ppm/°C

K = 100 ppm/°C

L = 200 ppm/°C

The first 3 digits are

significant figures and

the last digit specifies

the number of zeros

to follow. “R”

B = 0.1 %

D = 0.5 %

F = 1.0 %

G = 2.0 %

J = 5.0 %

S = wraparound 

lead (Pb)-free 

solder

TAPE AND REEL

T1 = 1000 min., 1000 mult ⁽¹⁾

TF = full reel

w/nickel barrier

TS = 100 min., 1 mult

designates the

decimal point.

Example:

10R0 = 10 

1000 = 100 

1002 = 10 k

Note

(1)

Preferred packaging code

TOLERANCE

(%)

TCR

RESISTANCE

(ppm/°C)

25, 50, 100, 200

100, 200

10  to 1 M

5  to 10 

1.0  to 5 

0.1, 0.5, 1, 2, 5

1, 2, 5

200

1, 2, 5

Revision: 01-Feb-17

Document Number: 60024

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Revision: 08-Feb-17

Document Number: 91000

相关型号：