PATT0402L4R87FGT1 [VISHAY]

RES SMD 4.87 OHM 1% 1/20W 0402;


型号：	PATT0402L4R87FGT1
厂家：	VISHAY
描述：	RES SMD 4.87 OHM 1% 1/20W 0402
文件：	总4页 (文件大小：90K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PATT

Vishay Dale Thin Film

www.vishay.com

Precision Automotive High Temperature (155 °C at Full

Rated Power) Thin Film Chip Resistor, AEC-Q200 Qualified

FEATURES

• Resistance range: 1.0 Ω to 1 MΩ

• AEC-Q200 qualified, table 7F

• AEC-Q200 qualified, ESD rated class 1C

(< 1 kΩ: 1 kV; > 1 kΩ: 2 kV)

• Laser trimmed to any value

• Intrinsic moisture protected resistor element

• Moisture resistant to MIL-STD-202, method 106

• Tantalum nitride resistor film on alumina substrate

• 100 % visual inspected per MIL-PRF-55342

LINKS TO ADDITIONAL RESOURCES

• Laser-trimmed tolerances to 0.1 %

• Load life stability 0.2 % at 1000 h at 155 °C and 100 %

rated power

Infographics

• Very low noise and voltage coefficient

The terminations consist of an adhesion layer, a leach

(< -30 dB, < 0.1 ppm/V)

resistant nickel barrier and gold plating compatible with high

temperature solder systems.

• Sulfur resistant (per ASTM B809-95 humid vapor test)

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

CONSTRUCTION

Tantalum Nitride

Resistive Film

TYPICAL PERFORMANCE

Passivation

Gold

ABSOLUTE

Nickel Barrier

TCR

TOL.

High Purity

Alumina Substrate

Adhesion Layer

0.1

STANDARD ELECTRICAL SPECIFICATIONS

TEST

SPECIFICATIONS

CONDITIONS

Material

Tantalum nitride

1.0 Ω to 1 MΩ

25 ppm/°C to 100 ppm/°C

0.1 % to 1.0 %

0.2 %

Resistance Range

TCR: Absolute

-55 °C to +175 °C

Tolerance: Absolute

Stability: Absolute

Stability: Ratio

+25 °C

1000 h at 155 °C and 100 % rated power

Not applicable

Less than 0.1 ppm/V

75 V

Voltage Coefficient

Working Voltage

Operating Temperature Range

Storage Temperature Range ⁽¹⁾

Noise

-55 °C to +250 °C

< -30 dB

Shelf Life Stability: Absolute

100 ppm

1 year at 25 °C

Note

(1)

Storage temperature rating is for device only

COMPONENT RATINGS

CASE SIZE

POWER RATING (mW)

WORKING VOLTAGE (V)

RESISTANCE RANGE (Ω)

1.5 to 51K

0402

0603

150

200

400

2.75 to 120K

0805

100

200

2.75 to 301K

1206

1.0 to 1M

Revision: 08-Mar-2021

Document Number: 60124

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PATT

Vishay Dale Thin Film

www.vishay.com

DIMENSIONS in inches

CASE SIZE

0402

0603

0805

1206

0.042 0.008

0.064 0.006

0.080 0.006

0.126 0.008

0.022 0.005

0.032 0.005

0.050 0.005

0.063 0.005

0.015 0.003

0.010 0.005

0.012 0.005

0.016 0.008

0.010 0.005

0.015 0.005

0.020 + 0.005 / - 0.01 0.020 + 0.005 / -0.01

ENVIRONMENTAL TESTS

ENVIRONMENTAL TEST

CONDITIONS

TYPICAL VISHAY PERFORMANCE

High temperature storage

MIL-STD-202 method 108, 1000 h at 125 °C

0.05 %

JESD22 method JA-104, 1000 cycles,

-55 °C to +155 °C

MIL-STD-202 method 106

MIL-STD-202 method 103, 1000 h at 85 °C, 85 % RH,

10 % rated power

Temperature cycling

Moisture resistance

Biased humidity

0.115 %

0.017 %

0.133 %

MIL-STD-202 method 108,

1000 h at 155 °C

0.20 % at 100 % rated power and 155 °C.

Effective film temperature is 200 °C.

Life

Mechanical shock

Vibration

Resistance to soldering heat

MIL-STD-202 method 213, condition C

MIL-STD-202 method 204, 10 Hz to 2 kHz

MIL-STD-202 method 210, condition B

0.008 %

0.09 %

AEC-Q200-002, human body

(< 1 kΩ: 1 kV; > 1 kΩ: 2 kV)

Electrostatic discharge

0.10 % at 2 kV

Solderability

Die shear

Flame retardance

MIL-STD-883 method 2003 para 2.3.1 and J-STD-002

MIL-PRF-55342

Pass

AEC-Q200-001 para 4.0

MECHANICAL SPECIFICATIONS

Resistive element

Tantalum nitride

Substrate material

Alumina

Terminations

Gold (10 μin. min.) over nickel (50 μin. min.)

DERATING CURVE

Axis Title

10000

100

1000

100

-55

100

200

250

155

Ambient Temperature (°C)

Revision: 08-Mar-2021

Document Number: 60124

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PATT

Vishay Dale Thin Film

www.vishay.com

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: PATT0603E1002BGT1

GLOBAL CASE

TCR

RESISTANCE

TOLERANCE

TERMINATION

PACKAGING

MODEL

SIZE

CHARACTERISTIC

PATT

0402

0603

E = 25 ppm/°C

H = 50 ppm/°C

The first 3 digits are

significant figures and

B = 0.1 %

D = 0.5 %

F = 1.0 %

G = 2.0 %

J = 5.0 %

G = wraparound

gold over nickel

barrier

BULK

BS = 100 min., 1 mult.

WAFFLE

0805 K = 100 ppm/°C ⁽¹⁾the last digit specifies

1206

L = 200 ppm/°C

the number of zeros

to follow. “R”

designates the

decimal point.

WS = 100 min., 1 mult.

W0 = 100 min.,100 mult.

WI = 100 min.,1 mult.

(item single lot date code)

WP = 100 min.,1 mult.

(package unit single lot

date code)

Example:

10R0 = 10 Ω

1000 = 100 Ω

1002 = 10 kΩ

TAPE AND REEL

T0 = 100 min., 100 mult.

T1 = 1000 min., 1000 mult.

T3 = 300 min., 300 mult.

T5 = 500 min., 500 mult.

TF = full reel

TS = 100 min., 1 mult.

TI = 100 min., 1 mult.

(item single lot date code)

TP = 100 min., 1 mult.

(package unit single lot

date code)

Note

(1)

Characteristic TCR - (R < 10 Ω)

TCR

(ppm/°C)

TOLERANCE

(%)

RESISTANCE

10 Ω to 1 MΩ

5 Ω to 10 Ω ⁽¹⁾

1.0 Ω to 5 Ω ⁽¹⁾

25, 50, 100, 200

100, 200

200

0.1, 0.5, 1, 2, 5

1, 2, 5

Note

(1)

Resistance values from 1.0 Ω to 10 Ω are undergoing PPAP qualification; results are expected to be similar to PPAP qualified 10 Ω to 120 kΩ

Revision: 08-Mar-2021

Document Number: 60124

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Legal Disclaimer Notice

www.vishay.com

Vishay

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product

with the properties described in the product specification is suitable for use in a particular application. Parameters provided in

datasheets and / or specifications may vary in different applications and performance may vary over time. All operating

parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.

Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited

to the warranty expressed therein.

Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and

for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of

any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.

Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website

or for that of subsequent links.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Revision: 09-Jul-2021

Document Number: 91000

相关型号：