PLT0603Z1013QST3 [VISHAY]
Fixed Resistor, Thin Film, 0.15W, 101000ohm, 75V, 0.02% +/-Tol, 5ppm/Cel, Surface Mount, 0603, CHIP, HALOGEN FREE AND ROHS COMPLIANT;
| 型号： | PLT0603Z1013QST3 |
| 厂家： | 
VISHAY |
| 描述： | Fixed Resistor, Thin Film, 0.15W, 101000ohm, 75V, 0.02% +/-Tol, 5ppm/Cel, Surface Mount, 0603, CHIP, HALOGEN FREE AND ROHS COMPLIANT 电阻器 |
| 文件： | 总3页 (文件大小：89K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PLT
www.vishay.com
Vishay Dale Thin Film
Precision Low TCR Thin Film Resistor, Surface Mount Chip,
ꢀ ppmꢁ/C TCR, ꢂ0ꢂ1 ꢃ Tolerance
FEATURES
• TCR of 5 ppm/°C standard
• Tolerances to 0.01 %
• Anti corrosion resistant film with (SPM) special
passivation method
• Stable film and performance characteristics
(R 0.04 % at 70 °C, 10 000 h)
• Non-standard resistance values available
Actual Size ꢂ6ꢂ3
• Very low noise and voltage coefficient
Vishay’s proven precision thin film wraparound resistors will
(< - 30 dB, 0.1 ppm/V)
meet your exact requirements. These resistors are ideal for
• UL 94 V-0 flame resistant
precision applications requiring low noise, stability, ultra low
temperature coefficient of resistance, and low voltage
coefficient. The chip resistors are available in any resistance
ohmic value in the range specified below.
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Note
* Lead (Pb)-containing terminations are not RoHS-compliant.
Exemptions may apply.
CONSTRUCTION
SPM Passivation
Enhancement
Passivated Nichrome
Resistive Film
TYPICAL PERFORMANCE
Solder
Coating
ABSOLUTE
TCR
TOL0
ꢀ
Nickel Barrier
ꢂ0ꢂ1
High Purity
Alumina Substrate
Adhesion Layer
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Material
Passivated nichrome
250 to 775 k
5 ppm/°C
-
Resistance Range
TCR: Absolute
-
- 55 °C to + 125 °C
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
0.1 % to 0.01 %
R 0.02 %
+ 25 °C
2000 h at 70 °C
-
-
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
0ꢀ1 ꢁꢁpm/ ꢂtꢃꢁꢄiaꢅl
75 / to 200 /
-
-
- 55 °C to + 125 °C
- 55 °C to + 150 °C
< - 35 dB ꢂtꢃꢁꢄiaꢅl
R 0.01 %
-
-
-
Shelf Life Stability: Absolute
1 year at + 25 °C
COMPONENT RATINGS
CASE SIZE
POWER RATING (mW)
WORKING VOLTAGE (V)
RESISTANCE RANGE ()
250 to 130K
0603
150
250
400
75
0805
100
200
250 to 260K
1206
250 to 775K
Revision: 25-Feb-13
Document Number: 60030
1
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PLT
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches
D
W
T
E
L
CASE SIZE
0603
TERM
L
W
T
D
E
B
B
B
0.064 0.006
0.080 0.006
0.126 0.008
0.032 0.005
0.050 0.005
0.063 0.005
0.020 max.
0.012 0.005
0.016 0.008
0.015 0.005
0.015 0.005
0805
0.015 to 0.033
0.015 to 0.033
1206
0.020 + 0.005/- 0.010
0.020 + 0.005/- 0.010
ENVIRONMENTAL TESTS - TYPICAL
DERATING CURVE
1ꢂ k R
1ꢂꢂ k R
100
80
60
40
20
0
ENVIRONMENTAL TEST
(ꢃ)
(ꢃ)
Thermal Shock
0.02
0.01
0.02
Short Time Overload
Low Temperature Operation
Resistance to Solder Heat
Moisture Resistance
High Temperature Exposure
Load Life (1ꢂ ꢂꢂꢂ h, + 7ꢂ /C)
TCR
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.04
0.04
0
70
125
150
5 ppm/°C
5 ppm/°C
Ambient Temperature °C
GLOBAL PART NUMBER INFORMATION
P
L
T
ꢂ
6
ꢂ
3
Z
1
ꢂ
ꢂ
1
Q
B
T
1
GLOBAL CASE
TCR
RESISTANCE
The first digits are
TOLERANCE
TERMINATION
PACKAGING
WS = WAFFLE PACK
MODEL
SIZE CHARACTERISTIC
PLT
ꢂ6ꢂ3
ꢂ8ꢂꢀ
12ꢂ6
Z = 5 ppm/°C
3
L =
B = Wraparound Sn/Pb
significant figures and
0.01 % (2)
solder w/Ni barrier
(63 % Sn/37 % Pb w/ TAPE AND REEL
nickel barrier)
the last digit specifies Q = 0.02 %
the number of zeros to A = 0.05 %
follow. “R” designates B = 0.1 %
the decimal point.
Tꢂ = 100 min., 100 mult
T1 = 1000 min., 1000 mult (1)
T3 = 300 min., 300 mult
Tꢀ = 500 min., 500 mult
S = Wraparound
lead (Pb)-free solder
96.5 % Sn/3.0 % Ag/ TF = Full reel
0.5 % Cu
Example:
1001 = 1 k
2500 = 250
TS = 100 min., 1 mult
RoHS compliant - e1
Special values with more
than 4 significant figures,
use a R for value below
1 k and a K for values
greater than
signify a decimal point.
1 k to
982R6 = 982.6
532R41 = 532.41
Notes
(1)
Preferred packaging code
L = 0.01 % tolerance available only for resistance value greater than 250
(2)
Revision: 25-Feb-13
Document Number: 60030
2
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
相关型号：
PLT0603Z1041QST3
Fixed Resistor, Thin Film, 0.15W, 1040ohm, 75V, 0.02% +/-Tol, 5ppm/Cel, Surface Mount, 0603, CHIP, HALOGEN FREE AND ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明