PLT0603Z1041LBTS [VISHAY]
RES SMD 1.04K OHM 0.15W 0603;型号: | PLT0603Z1041LBTS |
厂家: | VISHAY |
描述: | RES SMD 1.04K OHM 0.15W 0603 |
文件: | 总3页 (文件大小:120K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PLT
www.vishay.com
Vishay Dale Thin Film
Precision Low TCR Thin Film Resistor, Surface Mount Chip,
ꢀ ppmꢁ/C TCR, ꢂ0ꢂ1 ꢃ Tolerance
FEATURES
• TCR of ꢀ ppm/ꢁC standard
• Tolerances to 0.01 ꢂ
Available
• Anti corrosion resistant film with (SPM) special
passivation method
Available
• Stable film and performance characteristics
(R 0.0ꢃ ꢂ at 70 ꢁC, 10 000 h)
• Non-standard resistance values available
Actual Size ꢂ6ꢂ3
• Very low noise and voltage coefficient
Vishay’s proven precision thin film wraparound resistors will
meet your exact requirements. These resistors are ideal for
precision applications requiring low noise, stability, ultra low
temperature coefficient of resistance, and low voltage
coefficient. The chip resistors are available in any resistance
ohmic value in the range specified below.
(< -30 dB, 0.1 ppm/V)
• UL 9ꢃ V-0 flame resistant
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
CONSTRUCTION
SPM Passivation
Enhancement
Passivated Nichrome
Resistive Film
Solder
Coating
TYPICAL PERFORMANCE
ABSOLUTE
Nickel Barrier
High Purity
Alumina Substrate
Adhesion Layer
TCR
TOL0
ꢀ
ꢂ0ꢂ1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
CONDITIONS
Material
Passivated nichrome
-
Resistance Range
TCR: Absolute
100 to 3 M
ꢀ ppm/ꢁC to 10 ppm/ꢁC
0.1 ꢂ to 0.01 ꢂ
R 0.02 ꢂ
-
-ꢀꢀ ꢁC to +12ꢀ ꢁC
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
+2ꢀ ꢁC
2000 h at 70 ꢁC
-
-
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
0.1 ppm/V (typical)
7ꢀ V to 200 V
-
-
-ꢀꢀ ꢁC to +12ꢀ ꢁC
-ꢀꢀ ꢁC to +1ꢀ0 ꢁC
< -3ꢀ dB (typical)
R 0.01 ꢂ
-
-
-
Shelf Life Stability: Absolute
1 year at +2ꢀ ꢁC
COMPONENT RATINGS
CASE SIZE
POWER RATING (mW)
WORKING VOLTAGE (V)
RESISTANCE RANGE ()
100 to 130K
0603
1ꢀ0
2ꢀ0
7ꢀ
080ꢀ
100
200
200
200
100 to 260K
1206
ꢃ00
100 to 77ꢀK
2010
800
1000
1ꢀ0 to 2M
2ꢀ12
200 to 3M
Revision: 18-Oct-2019
Document Number: 60030
1
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PLT
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches
D
W
T
E
L
CASE SIZE
0603
TERM
B, S
B, S
B, S
B, S
B, S
L
W
T
D
E
0.06ꢃ 0.006
0.080 0.006
0.126 0.008
0.209 0.009
0.2ꢀ9 0.009
0.032 0.00ꢀ
0.0ꢀ0 0.00ꢀ
0.063 0.00ꢀ
0.098 0.00ꢀ
0.12ꢃ 0.00ꢀ
0.020 max.
0.012 0.00ꢀ
0.016 0.008
0.01ꢀ 0.00ꢀ
0.01ꢀ 0.00ꢀ
080ꢀ
0.01ꢀ to 0.033
0.01ꢀ to 0.033
0.01ꢀ to 0.033
0.01ꢀ to 0.033
1206
0.020 +0.00ꢀ / -0.010
0.020 0.00ꢀ
0.020 +0.00ꢀ / -0.010
0.020 0.00ꢀ
2010
2ꢀ12
0.020 0.00ꢀ
0.020 0.00ꢀ
ENVIRONMENTAL TESTS - TYPICAL
DERATING CURVE
1ꢂ k R
1ꢂꢂ k R
100
80
60
ꢃ0
20
0
ENVIRONMENTAL TEST
(ꢃ)
(ꢃ)
Thermal Shock
0.02
0.01
0.02
Short Time Overload
Low Temperature Operation
Resistance to Solder Heat
Moisture Resistance
High Temperature Exposure
Load Life (1ꢂ ꢂꢂꢂ h, +7ꢂ /C)
TCR
0.01
0.01
0.01
0.01
0.01
0.02
0.02
0.02
0.02
0.0ꢃ
0.0ꢃ
0
70
12ꢀ
1ꢀ0
ꢀ ppm/ꢁC
ꢀ ppm/ꢁC
Ambient Temperature ꢁC
GLOBAL PART NUMBER INFORMATION
P
L
T
ꢂ
6
ꢂ
3
Z
1
ꢂ
ꢂ
1
Q
B
T
1
GLOBAL CASE
MODEL SIZE CHARACTERISTIC
TCR
RESISTANCE
TOLERANCE
TERMINATION
PACKAGING
PLT
ꢂ6ꢂ3
ꢂ8ꢂꢀ
12ꢂ6
2ꢂ1ꢂ
2ꢀ12
Z = ꢀ ppm/ꢁC
Y = 10 ppm/ꢁC
The first 3 digits are
significant figures and
the last digit specifies
the number of zeros to
follow. “R” designates
the decimal point.
L =
B = wraparound Sn / Pb
WS = WAFFLE PACK
WI = 100 min., 1 mult.
(item single lot date code)
WP = 100 min., 1 mult.
(package unit single
lot date code)
0.01 ꢂ (2)
solder w/ Ni barrier
Q = 0.02 ꢂ (63 ꢂ Sn / 37 ꢂ Pb w/
A = 0.0ꢀ ꢂ
B = 0.1 ꢂ
D = 0.ꢀ ꢂ
F = 1 ꢂ
nickel barrier)
S = wraparound
lead (Pb)-free solder
96.ꢀ ꢂ Sn / 3.0 ꢂ Ag /
0.ꢀ ꢂ Cu
Example:
1001 = 1 k
2ꢀ00 = 2ꢀ0
TAPE AND REEL
Tꢂ = 100 min., 100 mult.
T1 = 1000 min., 1000 mult. (1)
T3 = 300 min., 300 mult.
Tꢀ = ꢀ00 min., ꢀ00 mult.
TF = full reel
RoHS compliant - e1
Special values with more
than ꢃ significant figures,
use a R for value below
1 k and a K for values
greater than 1 k to
TS = 100 min., 1 mult.
TI = 100 min., 1 mult.
(item single lot date code)
TP = 100 min., 1 mult.
(package unit single
lot date code)
signify a decimal point.
982R6 = 982.6
ꢀ32Rꢃ1 = ꢀ32.ꢃ1
Notes
(1)
Preferred packaging code
L and Q tolerances are available only for resistance values > 2ꢀ0
(2)
Revision: 18-Oct-2019
Document Number: 60030
2
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
Document Number: 91000
1
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明