PTN2512E1824BGT1 [VISHAY]

RESISTOR, THIN FILM, 1 W, 0.1 %, 25 ppm, 1820000 ohm, SURFACE MOUNT, 2512, CHIP, ROHS COMPLIANT;


型号：	PTN2512E1824BGT1
厂家：	VISHAY
描述：	RESISTOR, THIN FILM, 1 W, 0.1 %, 25 ppm, 1820000 ohm, SURFACE MOUNT, 2512, CHIP, ROHS COMPLIANT 电阻器
文件：	总4页 (文件大小：121K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PTN

Vishay Thin Film

Commercial Thin Film Chip Resistors

FEATURES

• Lead (Pb)-free or Sn/Pb terminations available

• Moisture resistant

Pb-free

Available

• High purity alumina substrate

• Non-standard values available

RoHS*

COMPLIANT

Actual Size

1505

• Will pass + 85 °C, 85 % relative humidity and

10 % rated power

These chip resistors are available in both “top side” and

“wraparound” termination styles in a variety of sizes. They

incorporate self passivated, enhanced Tantalum Nitride

films, to give superior performance on moisture resistance,

voltage coefficient, power handling and resistance stability.

The terminations consist of an adhesion layer, a leach

resistant nickel barrier, and solder coating. This product will

• 100 % visual inspected per MIL-PRF-55342

• Very low noise and voltage coefficient (< - 30 dB)

• Non-inductive

• Laser-trimmed tolerances to 0.1 %

• Wraparound resistance less than 10 mΩ

• Epoxy bondable termination available

out-perform all requirements of characteristic

MIL-PRF-55342.

CONSTRUCTION

TYPICAL PERFORMANCE

Tantalum Nitride

Resistive Film

Passivation

ABS

Solder

coating

TCR

TOL

Nickel barrier

0.1

High Purity

Alumina Substrate

Adhesion layer

STANDARD ELECTRICAL SPECIFICATIONS

TEST

SPECIFICATIONS

CONDITIONS

Material

Tantalum nitride

Absolute TCR

Absolute Tolerance

Operating Temperature Range

Noise

25 ppm/°C, 50 ppm/°C, 100 ppm/°C

1.0 %, 0.5 % and 0.1 %

- 55 °C to + 125 °C

+ 25 °C

< - 25 dB

CASE SIZE

0402

POWER RATING (mW)

MAX. WORKING VOLTAGE

RESISTANCE RANGE - (Ω)

20 - 35K

100

150

200

250

500

400

750

800

1000

0502

20 - 65K

0505

20 - 130K

10 - 80K

0603

0805 ⁽¹⁾, 0705 ⁽¹⁾

100

150

200

150

200

10 - 301K

50 - 600K

10 - 1M

1005

1010

1206

1505

10 - 1M

2208

10 - 1.75M

10 - 2M

2010

2512

10 - 3M

Note

⁽¹⁾0705 and 0805 are the same (only use 0805 when ordering)

* Pb containing terminations are not RoHS compliant, exemptions may apply

Document Number: 60026

Revision: 23-Jan-09

For technical questions, contact: thin-film@vishay.com

www.vishay.com

PTN

Commercial Thin Film Chip Resistors

Vishay Thin Film

DIMENSIONS in inches

CASE SIZE

0402

TERM

0.042 0.008

0.055 0.006

0.064 0.006

0.080 0.006

0.105 0.007

0.126 0.008

0.155 0.007

0.209 0.009

0.230 0.007

0.259 0.009

0.022 0.005

0.025 0.005

0.050 0.005

0.032 0.005

0.050 0.005

0.100 0.005

0.063 0.005

0.050 0.005

0.098 0.005

0.075 0.005

0.124 0.005

0.012 to 0.033

0.020 Max.

0.010 0.005

0.012 0.005

0.015 0.005

0.020 + 0.005, - 0.010

0.015 0.005

0.020 0.005

0.010 0.005

0.015 0.005

0.020 + 0.005, - 0.010

0.015 0.005

0.020 0.005

0502

0505

0603

0805 ⁽¹⁾, 0705 ⁽¹⁾

1005

0.015 to 0.033

1010

1206

1505

2010

2208

2512

ENVIRONMENTAL TESTS (VISHAY PERFORMANCE VS. MIL-PRF-55342 REQUIREMENTS)

LIMITS MIL-PRF-55342

CHARACTERISTIC “H”

TYPICAL VISHAY

PERFORMANCE

ENVIRONMENTAL TEST

Resistance Temperature Characteristic

Max. Ambient Temp. at Rated Wattage

Max. Ambient Temp. at Power Derating

Thermal Shock

50 ppm/°C

+ 70 °C

35 ppm/°C

+ 70 °C

+ 150 °C

0.25 %

+ 150 °C

0.040 %

ΔR

Low Temperature Operation

Short Time Overload

0.25 %

0.005 %

0.10 %

0.010 %

High Temperature Exposure

Resistance to Bonding Exposure

Moisture Resistance

0.20 %

0.150 %

0.25 %

0.005 %

0.40 %

0.029 %

Life + 70 °C at 1000 hours

Insulation Resistance

0.50 %

0.035 %

10 000 Minimum

> 100 000 MΩ

Note

⁽¹⁾0705 and 0805 are the same (only use 0805 when ordering)

www.vishay.com

For technical questions, contact: thin-film@vishay.com

Document Number: 60026

Revision: 23-Jan-09

PTN

Commercial Thin Film Chip Resistors

Vishay Thin Film

FILM LOAD LIFE STABILITY (at + 125 °C)

DERATING CURVE

0.1 %

100

0.06 %

0.05 %

0.04 %

0.03 %

Maximum

Absolute

Change

0.02 %

0.01 %

0.006 %

0.005 %

0.004 %

0.003 %

0.002 %

0.001 %

125

150

200 400 600 800 1000

1200 1400

1800

2000

1600

Time in h at + 125 °C

Ambient Temperature °C

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: PTN1206E1002BBT1 (preferred part number format)

GLOBAL

MODEL

CASE

SIZE

TCR

RESISTANCE

TOLERANCE

TERMINATION

PACKAGING

CHARACTERISTIC

PTN

0402

0502

0505

0603

0805

1005

1010

1206

1505

2208

2010

2512

E = 25 ppm/°C

H = 50 ppm/°C

K = 100 ppm/°C

The first 3 digits

are significant

figures and the

last digit specifies

the number of

zeros to follow.

“R” designates

the decimal point.

B = 0.1 %

D = 0.5 %

F = 1 %

G = 2 %

J = 5 %

B = Wraparound

Sn/Pb solder

BS = BULK

100 Min 1 Mult

WS = WAFFLE

100 Min 1 Mult

63 % Sn/ 37 % Pb

w/ nickel barrier

G = Wraparound Au

over Ni (gold)

< 50 Ω

TAPE AND REEL

T0 = 100 Min 100 Mult

T1 = 1000 Min 1000 Mult

100 ppm/°C

best

termination

epoxy bondable

RoHS compliant - e4 T3 = 300 Min 300 Mult

Example:

S = Wraparound lead

(Pb)-free solder

T5 = 500 Min 500 Mult

TF = Full Reel

TS = 100 Min 1 Mult

10R0 = 10 Ω

1000 = 100 Ω

1001 = 1 kΩ

96.5 % Sn/3.0 %Ag/

0.5 % Cu

RoHS compliant - e1

Historical Part Number example: PTN0805H8801BBT

PTN

0805

8801

TCR

CHARACTERISTIC

STYLE

CASE SIZE

OHMIC VALUE

TOLERANCE

TERMINATION

PACKAGING

Document Number: 60026

Revision: 23-Jan-09

For technical questions, contact: thin-film@vishay.com

www.vishay.com

Legal Disclaimer Notice

Vishay

Disclaimer

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf

(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein

or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any

information provided herein to the maximum extent permitted by law. The product specifications do not expand or

otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed

therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this

document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless

otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such

applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting

from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding

products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000

Revision: 18-Jul-08

www.vishay.com

相关型号：