RCMT0213800BES14 [VISHAY]

RESISTOR, METAL FILM, 0.125 W, 0.1 %, 25 ppm, 1380 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT;


型号：	RCMT0213800BES14
厂家：	VISHAY
描述：	RESISTOR, METAL FILM, 0.125 W, 0.1 %, 25 ppm, 1380 ohm, THROUGH HOLE MOUNT, AXIAL LEADED, ROHS COMPLIANT 电阻器
文件：	总5页 (文件大小：646K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

RCMT

Vishay Sfernice

Molded Metal Film High Stability (< 0.25 % after 1000 h)

High Temperature (up to 175 °C) Precision Resistors

FEATURES

• 0.1 W to 2 W at 125 °C

• EN140100

• CECC 40 101-044

• High climatic performance - 65 °C/+ 175 °C/56 days

• High long term stability drift < 0.25 % after 1000 h

• Tight temperature coefficient to 15 ppm/°C

The performance of the RCMT resistors exceed the

• Temperature coefficient tracking 5 ppm/°C

• Wide ohmic range from 1 Ω to 5 MΩ

• Tight tolerances up to 0.1 %

requirements of NF

C 83-230 standards. They are

particularly relevant to the more stringent military and

industrial applications especially when high ambient

temperatures such as + 175 °C are to be encountered.

• Matching tolerance to 0.05 %

The RCMT resistors are qualified and released to the

NF C UTE 83-230 standard styles RS56C, RS60E and C,

RS65E and C, RS70E and C.

• Termination: Pure matte tin

• Compliant to RoHS directive 2002/95/EC

DIMENSIONS in millimeters

WEIGHT

SERIES

A max.

Ø B max.

Ø C

25 min.

RCMT01

RCMT02

RCMT05

RCMT08

RCMT1

RCMT2

RCMT4

4.32

6.7

2.03

2.5

0.4

0.6

0.8

0.11

0.28

0.46

1.3

10.4

16.5

19.3

3.66

6.4

1.5

Ø B

Ø C

10.2

4.4

TEMPERATURE COEFFICIENT

NOMINAL

TEMPERATURE

COEFFICIENT

TYPICAL

TEMPERATURE

COEFFICIENT

TCR CODE

TEMPERATURE RANGE

0 °C to + 155 °C

- 55 °C to + 175 °C

15 ppm/°C

25 ppm/°C

50 ppm/°C

0 °C to + 70 °C

- 10 °C to + 70 °C

10 ppm/°C

15 ppm/°C

30 ppm/°C

ENVIRONMENTAL SPECIFICATIONS

PRACTICAL OPERATING TOLERANCES

After the 10 000 h load life test, at nominal power rating,

90’/30’ cycles, + 125 °C ambient temperature, the total actual

drifts measured at + 125 °C are the following:

Insulation Resistance

Voltage Coefficient

> 10⁷MΩ

10 ppm/V

Environmental Specifications - 65 °C/+ 175 °C/56 days

Manufacturing tolerance

0.1 %

1 %

Drift due to TCR (K4) + life drift

0.25 %

0.35 %

Max. total deviation from nominal

ohmic value, including the

manufacturing tolerance

0.35 %

1.35 %

Document Number: 52011

Revision: 02-Oct-09

For technical questions, contact: sfer@vishay.com

www.vishay.com

177

RCMT

Molded Metal Film High Stability (< 0.25 % after 1000 h)

High Temperature (up to 175 °C) Precision Resistors

Vishay Sfernice

TECHNICAL SPECIFICATIONS

RESISTANCE VALUE RANGE IN RELATION TO

- TEMPERATURE COEFFICIENT

- TOLERANCE

NF C

VISHAY

SFERNICE

SERIES

POWER

RATING

AT + 70 °C AT + 125 °C

POWER

RATING

83-230

CECC 40

101-044

MAXIMUM

VOLTAGE RESISTANCE

CRITICAL

0.5 %

1 %

0.1 %

0.2 %

0.5 %

1 %

0.1 %

0.2 %

0.5 %

1 %

0.2 %

RCMT01

511 k

49.9

100 k

49.9

511 k

100

100 k

100

100 k

0.063 W

0.125 W

0.25 W

0.5 W

1 W

0.05 W

0.1 W

0.125 W

0.25 W

0.5 W

1 W

200 V

300 V

350 V

400 V

500 V

600 V

800 V

511 k

RCMT01

RCMT02

56C

332 k

100 k

332 k

332 kΩ

RCMT02

56E

RCMT05

60C

332 k

1 M

332 k

10Ω

980 k

640 k

500 k

360 k

320 k

332 k

1 M

RCMT05

60E

RCMT08

65C

1 M

750 k

1.5 M

1 M

1.5 M

RCMT08

65E

RCMT1

70C

1 M

2 M

750 k

1 M

2 M

2 MΩ

RCMT1

70E

RCMT2

1 M

10Ω

2 W

2.5 M

1 M

2.5 M

RCMT2

RCMT4

2.5 M

5 M

2 M

4 W

2 W

2.5 M

5 M

2.5 M

RCMT4

Note

•

Undergoes European Quality Insurance System (CECC)

POWER RATING

TEMPERATURE RISE

100

125

150

175

1.0

RATED POWER IN W

0.5

1.5

2.0

AMBIENT TEMPERATURE IN °C

www.vishay.com

178

For technical questions, contact: sfer@vishay.com

Document Number: 52011

Revision: 02-Oct-09

RCMT

Molded Metal Film High Stability (< 0.25 % after 1000 h)

High Temperature (up to 175 °C) Precision Resistors

Vishay Sfernice

PERFORMANCE

EN140100 - CECC 40 101-044

CONDITIONS

TYPICAL VALUES

AND DRIFTS

TESTS

REQUIREMENTS

Dielectric Voltage

2 U_n/1 min

0.25 %

0.05 % or 0.05 Ω

2.5 U_m/5 s

limited to 2 U_n

Short Time Overload

0.25 %

0.5 %

Load Life at Maximum Category

Temperature

1000 h at + 155 °C

0.25 % or 0.05 Ω

0.2 % or 0.05 Ω

0 % of P_r

Damp Heat Humidity

(Steady State)

56 days

with low load

0.5 %

0.1 %

Insulation resistance

> 10⁶MΩ

Rapid Temperature Change

Climatic Sequence

- 55 °C

- 65 °C

+ 175 °C

0.05 % or 0.05 Ω

0.5 %

Insulation resistance

> 10³MΩ

0.2 % or 0.05 Ω

Insulation resistance

> 10⁶MΩ

+ 175 °C

severity 1

Terminal Strength

Vibration

Pull - twist - 2 bends

Severity 55 B

0.1 %

0.5 %

0.05 % or 0.05 Ω

0.15 % or 0.05 Ω

0.25 % or 0.05 Ω

Soldering (Thermal Shock)

+ 260 °C 10 s

1000 h at P_n

Cycle 90’/30’

70 °C ambient

Load Life

Shelf Life

10 000 h at P_n

1 year ambient temperature

0.05 %

NOISE LEVEL

In a frequency decade, the average noise level is 0.1 µV/V for models RCMT08, RCMT1, RCMT2 and RCMT4 in all ohmic values.

It progressively increases as a function of the ohmic value and can reach 0.2 µV/V for the highest values of models RCMT02 and

RCMT05 (0.1 µV/V for R < 10 kΩ).

SPECIAL APPLICATIONS

Temperature coefficient tracking to 5 ppm.

Tolerance matching to 0.05 %.

Selection of positive or negative TCR in temperature range of - 20 °C to + 125 °C.

For these applications and other requirements consult Vishay Sfernice.

RECOMMENDATION

The lower the ohmic value, the more important the influence of lead resistance is on measurements. The nominal resistance

value is therefore measured at a distance of 5 mm from resistor body.

Document Number: 52011

Revision: 02-Oct-09

For technical questions, contact: sfer@vishay.com

www.vishay.com

179

RCMT

Molded Metal Film High Stability (< 0.25 % after 1000 h)

High Temperature (up to 175 °C) Precision Resistors

Vishay Sfernice

MARKING

Printed: series, style, NF style if applicable, ohmic value (in Ω), tolerance (in %), temperature coefficient, manufacturing

date. Due to lack of space, RCMT02 is referenced as MT02.

GLOBAL PART NUMBER INFORMATION

GLOBAL

MODEL

TEMPERATURE

COEFFICIENT

SIZE

SPECIAL

OHMIC VALUE

TOLERANCE

PACKAGING

RCMT

As applicable.

The first four digits are

significant figures and the

last digit specifies the

number of zeros to follow.

R designates decimal

point.

B = 0.1 %

A = 0.2 %

D = 0.5 %

F = 1 %

H = K3, 50 ppm/K

E = K4, 25 ppm/K

D = K5, 15 ppm/K

AM500 = A20

BAG100 = S14

BAG50 = S09

BAG10 = S03

BO50* = B25

13001 = 13 kΩ

*: possible in

N/A

33001 = 33 kΩ

220R0 = 220 Ω

1R220 = 1.22 Ω

www.vishay.com

180

For technical questions, contact: sfer@vishay.com

Document Number: 52011

Revision: 02-Oct-09

Legal Disclaimer Notice

Vishay

Disclaimer

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf

(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein

or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any

information provided herein to the maximum extent permitted by law. The product specifications do not expand or

otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed

therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this

document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless

otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such

applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting

from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding

products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.

Document Number: 91000

Revision: 18-Jul-08

www.vishay.com

相关型号：