ROT116BF5E103 [VISHAY]
Position, Rotary, Potentiometric Sensor, POSITION, ROTARY SENSOR-CONDUCTIVE PLASTIC, ROUND, ROHS COMPLIANT PACKAGE;型号: | ROT116BF5E103 |
厂家: | VISHAY |
描述: | Position, Rotary, Potentiometric Sensor, POSITION, ROTARY SENSOR-CONDUCTIVE PLASTIC, ROUND, ROHS COMPLIANT PACKAGE |
文件: | 总3页 (文件大小:323K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Series ROT/BF
Vishay Sfernice
Precision Rotative Transducers,
Conductive Plastic, Bushing Mounting
FEATURES
• Size 08 to 30
• Linearity ꢀ ꢁ down to 0.05 ꢁ
• Good repeatability
RoHS
COMPLIANT
• Long life
• Essentially infinite resolution
• Up to 6 electrical functions with the same shaft
• On request custom design to meet your specifications
• Following MIL-R-39023 and NFC 93-255 requirements
A complete range of bushing mounting rotational motion
transducers.
SIZE
08
09
11
13
15
18
20
30
MODEL
34 BF
78 BF
ꢀꢀ6 BF
ꢀ56 BF
ꢀ76 BF
ꢀ34 BF
200 BF
300 BF
ELECTRICAL SPECIFICATIONS
Functions
Theoretical Electrical Angle (TEA)
Linear, on request specific law
Actual electrical angle (AEA) - 2°
or
C ≤ 0.25 ꢁ
A ≤ ꢀ ꢁ
C ≤ 0.25 ꢁ
B ≤ 0.5 ꢁ
Down to D ≤ 0.ꢀ ꢁ
or
Independent Linearity (over TEA)
Best Linearity Available
Down to E ≤ 0.05 ꢁ
Actual Electrical Angle (AEA)
Ohmic Values (RT)
340° 3°
350° 2°
ꢀ kΩ
-
2 kΩ
-
5 kΩ
-
ꢀ0 kΩ - on request other values
Ohmic Value Tolerances at 20 °C
Output Smoothness
ꢀ0 ꢁ
≤ 0.05 ꢁ
≤ 0.025 ꢁ
Maximum Power Rating at 70 °C
Wiper Current
0.25 W
0.3 W
0.4 W
0.5 W
0.75 W
ꢀ.0 W
ꢀ.2 W
ꢀ.5 W
Recommended: a few µA - ꢀ mA max. (continuous)
{ Position: 2°
Tap (Current or Voltage)
On Request with Angular Position to be Specified
U = current
/ T = voltage Position: 2°
{ Width: ≤ 4°
min. ꢀ03 x RT
≤ 0.02 ꢁ
Load Resistance on Wiper (RL)
Repeatability
End Voltage
≤ 0.4 ꢁ for 470 Ω ≤ RT ≤ ꢀ000 Ω / ≤ 0.2 ꢁ for ꢀ000 Ω < RT ≤ 2200 Ω / ≤ 0.ꢀ ꢁ for RT > 2200 Ω
≥ ꢀ000 MΩ, 500 VDC
Insulation Resistance
Dielectric Strength
≥ 750 VRMS, 50 Hz
≥ ꢀ000 VRMS, 50 Hz
MECHANICAL SPECIFICATIONS
Mechanical Rotation
Mounting Type
Shaft Guiding
Shaft
360° continuous; stops on request
Bushing
Sleeve bearings; on request ball bearings
Stainless steel
Housing
Plastic moulding; on request anodized aluminum
Turrets; on request flexible leads, cables...
Precious metal multi-finger contact
Termination
Wiper
Starting Torque (N.cm)
Moment of Inertia (g. cm2)
≤ 0.5 ꢀ cup; ≤ 0.3 for each additional cup
0.3
ꢀꢀ
0.4
20
0.6
2ꢀ
0.8
30
ꢀ4
2.2
33
ꢀ6
2.8
45
ꢀ8
3.5
54
2ꢀ
ꢀ0
ꢀ cup
Weight (g)
2
2
2
2
2
2
2
3
3
3
3
ꢀ20 ꢀ0
62 ꢀ0
each additional cup
5
2
6
2
7
2
PERFORMANCE
Life (Million of Cycles)
Temperature Range
Climatic Category
≥ 20
- 55 °C to + ꢀ25 °C
55/ꢀ25/04
ꢀ50
Rotation Speed (RPM)
www.vishay.com
44
For technical questions, contact: sfer@vishay.com
Document Number: 54005
Revision: 22-Mar-07
Series ROT/BF
Precision Rotative Transducers,
Conductive Plastic, Bushing Mounting
Vishay Sfernice
DIMENSIONS in millimeters, general tolerance 0.5 mm
Ø 9.52 x 0.79
3/8 - 32 NEF2A THD
H
L
I
Ø A
ELECTRICAL
CONNECTIONS
2
0.4 x 45
3
1
Ø C
0.5 x 45°
- 0
O
*
Ø 10.3
- 0.02
CLOCK WISE
VIEWED FROM
SHAFT SIDE
J
1.6
9.9 MAX.
20 MAX.
N
Ø P
DELIVERED WITH NUT + WASHER
Note:
· On Request
Ø K ON CLAMP
POTENTIOMETER REFERENCE
11 13 15 18
116 BF 156 BF 176 BF 134 BF 200 BF 300 BF
SIZE
DIMENSIONS
DESIGNATION
08
09
20
30
MODEL 34 BF
78 BF
A - 0
- 0.0ꢀ3
Ø shaft
3.ꢀ75
3.ꢀ75
3.ꢀ75
3.ꢀ75
6.345
6.345
6.345
6.345
C max.
H min.
I max.
J max.
K
Ø body
ꢀ9.ꢀ8
4.2
22.3
4.7
ꢀ5.4
ꢀ5.4
23.8
8
27.07
5.35
ꢀ7.3
ꢀ7.3
27.7
8.8
33.35
5.35
20.8
ꢀ8.9
33.6
9
36.6
8
44.5
8
50.9
7.45
29.7
29.3
50.8
ꢀ3.48
-
76.4
5.55
43.7
42.6
77.5
-
Turret location
Radius on turrets
Radius on screw clamp
Ø on clamp
Locating pin (on request)
Ø pin (on request)
Angle between turrets
Total angle
ꢀ4
23.ꢀ
23.ꢀ
37.4
ꢀ4.4
3.25
20°
80°
2ꢀ
26.6
26.5
44.5
ꢀ6.8
3.25
25°
80°
2ꢀ
ꢀ3.5
ꢀ9.6
7.2
O
P max.
ꢀ.6
ꢀ.6
30°
ꢀ00°
ꢀ9
3.25
25°
3.25
20°
ꢀ00°
ꢀ9
-
L
2°
30°
ꢀ5°
80°
2ꢀ
ꢀ5°
80°
20.5
23.5
-
M max.
ꢀ00°
ꢀ4.5
2ꢀ.5
34.5
40.5
53
ꢀ00°
ꢀ9
ꢀ cup
2 cups
25
2ꢀ.5
34.5
40.5
53
24
24.5
37.5
48
24.5
37.5
48
26
3 cups
38
38
38
N max.
4 cups
48
45.5
59
48
-
5 cups
6ꢀ
60.5
72
6ꢀ
62
-
6 cups
59
72
59
67
72
72
-
ORDERING INFORMATION/DESCRIPTION
ROT
156
B
F
1
C
T
502
e1
SERIES SIZE MOUNTING TYPE CONDUCTOR NUMBER OF CUPS LINEARITY
TAP
OHMIC VALUE LEAD FINISH
B: Bushing
F: Plastic film
From ꢀ up to 6
A: ꢀ ꢁ
On request First 2 digits are
B: 0.5 ꢁ
T: Voltage
significant
numbers 3rd
digit indicates
C: 0.25 ꢁ U: Current
D: 0.ꢀ ꢁ
position to
E: 0.05 ꢁ be specified number of zeros
Special characteristics and designs on request
SAP PART NUMBERING GUIDELINES
RO 116BF
1
D
103
MODEL
GANG NUMBER
From ꢀ up to 6
LINEARITY
OHMIC VALUE
ꢀ0 kΩ
Document Number: 54005
Revision: 22-Mar-07
For technical questions, contact: sfer@vishay.com
www.vishay.com
45
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Revision: 12-Mar-12
Document Number: 91000
1
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明