S102C15K000V [VISHAY]
RESISTOR, METAL FOIL, 0.3 W, 0.005 %, 4.5 ppm, 15000 ohm, THROUGH HOLE MOUNT, RADIAL LEADED;
| 型号： | S102C15K000V |
| 厂家： | 
VISHAY |
| 描述： | RESISTOR, METAL FOIL, 0.3 W, 0.005 %, 4.5 ppm, 15000 ohm, THROUGH HOLE MOUNT, RADIAL LEADED 电阻器 |
| 文件： | 总5页 (文件大小：124K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
S Series
Vishay Foil Resistors
High Precision Foil Resistor with TCR of ± 2.0ppm/°C,
Tolerance of ± 0.005% and Load Life Stability of ± 0.005%
FEATURES
• Very low Temperature Coefficient of Resistance
(TCR): ** - 55°C to + 125°C, 25°C Ref
Pb-free
- S102C Series: ± 2ppm/°C typical, ± 4.5ppm/°C max.
- S102K Series: ± 1ppm/°C typical, ± 2.5ppm/°C max.
• Load Life Stability: to ± 0.005% at 70°C, 2000hrs
• Tight Tolerance: ± 0.005%
Available
RoHS*
COMPLIANT
• Resistance Range: 0.5Ω to 1MΩ (higher or lower values of
resistance are available)
• Shelf Life Stability:
to Maximum 0.0025%, 1 year
• Rated Power: to 1W at + 125°C
• Matched sets are available per request
Any value at any tolerance
available within resistance range
(TCR Tracking: to 0.5ppm/°C)
• Voltage Coefficient: < 0.1ppm/V
• Low Inductance: < 0.08µH
• Current Noise: < - 40dB
• Rise/Decay Time: 1ns without ringing
• Thermal EMF: 0.05µV/°C
• Terminal Finishes Available:
Lead (Pb)-free (Sn 100%)
Tin/Lead Alloy (Sn 60%, Pb 40%)
• For better performances please review the Z201 datasheet
INTRODUCTION
Bulk Metal® Foil (BMF) Technology outperforms all other
resistor technologies available today for applications that
require high precision and high stability.
** For values below 50Ω please contact Application Engineering
This technology has been pioneered and developed by
VISHAY, products based on this technology are the most
suitable for a wide range of applications. BMF technology
allows us to produce customer orientated products designed
to satisfy challenging and specific technical requirements.
APPLICATIONS
• High Precision Amplifiers
• Down-hole (High Temperature)
• High Precision Instrumentation
• Medical and Test Equipment
• Industrial
• Audio (High End Stereo Equipment)
• EB Applications (electron beam scanning and recording
equipment, electron microscopes)
Model S Series made from Vishay BMF offers low TCR,
excellent load life stability, tight tolerance, fast response time,
low current noise, low thermal EMF and low voltage
coefficient, all in one resistor.
The S Series is virtually insensitive to destabillizing factors.
The resistor element is a solid alloy that displays the desirable
bulk properties of its parent material, thus it is inherently
stable and noise free.
• Military, Airborne
• Measurement Instrumentation
FIG 1 - FOIL RESISTOR TCR COMPARISON OF
FOIL ALLOYS IN MILITARY RANGE
Vishay Bulk Metal® S Series are the modern generation of
precision resistors, their design gives you a unique
combination of characteristics found in no other single
resistor- and they’re all standard.
+150
+100
1ppm/°C
+50
0
∆
R
R
Our Application Engineering Department is available to
advise and to make recommendation for non-standard
technical requirements and special applications, please
contact us.
(ppm)
-50
-100
-150
-200
-50
-55
2ppm/°C
-25
0
+25
+50
+75
+100 +125
Temperature (°C)
C Alloy
2ppm/
K Alloy
1ppm/°C
°
C
* Pb containing terminations are not RoHS compliant, exemptions may apply
SALES
• AMERICAS: foilsales.usa@vishay.com
• ASIA/JAPAN: foilsales.asia@vishay.com
• UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com
• GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com • FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com
• ISRAEL: foilsales.israel@vishay.com
For technical questions, contact: foil@vishay.com
www.vishay.com
71
Document Number: 63001
Revision 23-May-06
S Series
High Precision Foil Resistor with TCR of ± 2.0 ppm/°C,
Vishay Foil Resistors
Tolerance of ± 0.005% and Load Life Stability of ± 0.005%
FIGURE 2 - STANDARD IMPRINTING AND DIMENSIONS
Front View
Rear View
Optional Customer Part Number
Print specification, etc. if required
L
W
Date Code
Resistance
01
10
VISHAY
XXXX
S102C
XXXXXX
100R01
0.01%
Value Code
Year Week
H
Tolerance
*
ST
SW
LL
Model Number
LS
Lead Material #22 AWG
Round Solder Coated Copper
*The standoffs shall be so located as to give a lead clearance of 0.010" minimum between the resistor body and the printed circuit board
when the standoffs are seated on the printed circuit board. This is to allow for proper cleaning of flux and other contaminants from the
unit after all soldering processes.
TABLE 1 - MODEL SELECTION
TIGHTEST TOLERANCE (%)
VS. LOWEST
RESISTANCE VALUE (Ω)
MODEL
RESISTANCE MAXIMUM
AMBIENT
AVERAGE
WEIGHT
DIMENSIONS
INCHES mm
NUMBER
RANGE
WORKING POWER RATING
(Ω)
VOLTAGE @ + 70°C @ + 125°C IN GRAMS
*F (INCHES)
S102C (S102J**) 1 to 150K
300
350
350
500
0.6W
0.3W
0.6
1.4
1.9
4.0
W: 0.105 ± 0.010 2.67 ± 0.25
L: 0.300 ± 0.010 7.62 ± 0.25
H: 0.326 ± 0.010 8.28 ± 0.25
ST: 0.010 Minimum 0.254 Minimum
SW: 0.040 ± 0.005 1.02 ± 0.13
LL: 1.000 ± 0.125 25.4 ± 3.18
LS: 0.150 ± 0.0054 3.81 ± 0.13
up to 100K
S102K (S102L**) 1 to 100K
0.4W
0.2W
over 100K
± 0.005 / 50
± 0.01 / 25
± 0.02 / 12
± 0.05 / 5
± 0.1 / 2
S104D (S104F*)
S104K
1 to 500K
1 to 300K
1 to 750K
1 to 500K
0.5 to 1M
0.5 to 600K
1.0W
0.5W
W: 0.160 Maximum 4.06 Maximum (0.138)
L: 0.575 Maximum 14.61 Maximum (0.565)
H: 0.413 Maximum 10.49 Ma ximum (0.413)
ST: 0.035 ± 0.005 0.889 ± 0.13
up to 200K
0.6W
0.3W
SW: 0.050 ± 0.005 1.27 ± 0.13
over 200K
LL: 1.000 ± 0.125 25.4 ± 3.18
LS: 0.400 ± 0.020 10.16 ± 0.51
S105D (S105F*)
S 105K
1.5W
0.75W
W: 0.160 Maximum 4.06 Maximum (0.138)
L: 0.820 Maximum 20.83 Maximum (0.890)
H: 0.413 Maximum 10.49 Maximum (0.413)
ST: 0.035 ± 0.005 0.889 ± 0.13
up to 300K
± 0.5 / 1
0.8W
0.4W
SW: 0.050 ± 0.005 1.27 ± 0.13
over 300K
LL: 1.000 ± 0.125 25.4 ± 3.18
LS: 0.650 ± 0.020 16.51 ± 0.51 (0.7 ± 0.02)
S106D
2.0W
1.0W
W: 0.260 Maximum 6.60 Maximum
L: 1.200 Maximum 30.48 Maximum
H: 0.413 Maximum 10.49 Maximum
ST: 0.035 ± 0.005 0.889 ± 0.13
SW: 0.050 ± 0.005 1.27 ± 0.13
LL: 1.000 ± 0.125 25.4 ± 3.18
LS: 0.900 ± 0.020 22.86 ± 0.51
up to 400K
S106K
1.0W
0.5W
over 400K
*S104F and S105F have different package dimensions (see last
column). All other specifications are the same.
FIG 3 - POWER DERATING CURVE "S" SERIES
**0.200” (5.08mm) lead spacing available - specify S102J for
S102C, and S102L for S102K.
–55°C
+70°C
200%
175%
150%
125%
100%
75%
50%
25%
0
Double Rated Power
Note its minor outline dimensions variations:
INCHES
mm
Rated Power
W:
L:
0.098 Maximum
0.295 Maximum
0.315 Maximum
0.01 Minimum
0.875 Minimum
0.200 ± 0.003
2.49 Maximum
7.49 Maximum
8.00 Maximum
0.254 Minimum
22.23 Minimum
5.08 ± 0.076
Safe operation
H:
for <150 ppm
∆R after 2,000
hours load-life.
ST:
LL:
LS
–75 –50 –25
0
+25 +50 +75 +100 +125 +150 +175 +200
Ambient Temperature (°C)
SALES
• AMERICAS: foilsales.usa@vishay.com
• ASIA/JAPAN: foilsales.asia@vishay.com
• UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com
• GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com • FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com
• ISRAEL: foilsales.israel@vishay.com
For technical questions, contact: foil@vishay.com
www.vishay.com
72
Document Number: 63001
Revision 23-May-06
S Series
High Precision Foil Resistor with TCR of ± 2.0 ppm/°C,
Tolerance of ± 0.005% and Load Life Stability of ± 0.005%
Vishay Foil Resistors
TABLE 2 - “S” SERIES SPECIFICATIONS
Stability1
± 0.015%
± 0.005%
Maximum ∆R @ 0.3W/+ 125°C
Load Life at 2,000 hours.
Maximum ∆R @ 0.1W/+ 70°C
± 0.05%
± 0.01%
Maximum ∆R @ 0.3W/+ 125°C
Maximum ∆R @ 0.05W/+ 125°C
Load Life at 10,000 hours.
Shelf Life Stability
Current Noise
± 0.0025% Maximum ∆R after 1 year
± 0.005%
Maximum ∆R after 3 years
0.010µV
(RMS)/Volt of applied voltage (–40dB)
High Frequency Operation
Rise/Decay Time
1.0ns at 1KΩ
0.1µH maximum; 0.08µH typical
Inductance (L)2
1.0pF maximum; 0.5pF typical
Capacitance (C)
< 0.1ppm/V3
Voltage Coefficient
Thermal EMF4
0.1µV/°C
1µV/watt
Maximum; 0.05µV/°C typical
(Model S102C)
1. Load life ∆R Maximum can be reduced by 80%, please contact Applications Engineering Department
.
2. Inductance (L) due mainly to the leads.
3. The resolution limit of existing test equipment (within the measurement capability of the equipment, or “essentially zero.”)
4. µV/°C relates to EMF due to lead temperature difference and µV/watt due to power applied to the resistor.
TABLE 3 - ORDERING INFORMATION
Specify Vishay S Series resistors as follows:
Example:
V = ± 0.005%
T = ± 0.01%
Q = ± 0.02%
A = ± 0.05%
B = ± 0.1%
C = ± 0.25%
D = ± 0.5%
F = ± 1.0%
T = Lead (Pb)-free
none = Tin/Lead alloy
S102C
250R00
MODEL NO.
TERMINATION
RESISTANCE VALUE
TOLERANCE
Resistance Value, in ohms, is expressed by a series of 6 characters, 5 of which represent significant digits while the 6th is
a dual purpose letter that designates both the multiplier and the location of the comma or decimal.
RESISTANCE
RANGE
LETTER
DESIGNATOR
MULTIPLIER
FACTOR
EXAMPLE
10Ω to <1KΩ
1KΩ to 100KΩ
R
K
x 1
100R01 = 100.01Ω
5K2310 = 5,231Ω
x 103
For example: S102C T 250R00 V - Model: S102C; Termination: lead (Pb)-free; Value: 250Ω; Tolerance: 0.005%
SALES
• AMERICAS: foilsales.usa@vishay.com
• ASIA/JAPAN: foilsales.asia@vishay.com
• UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com
• GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com • FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com
• ISRAEL: foilsales.israel@vishay.com
For technical questions, contact: foil@vishay.com
www.vishay.com
73
Document Number: 63001
Revision 23-May-06
S Series
Vishay Foil Resistors
High Precision Foil Resistor with TCR of ± 2.0 ppm/°C,
Tolerance of ± 0.005% and Load Life Stability of ± 0.005%
TABLE 4 - ENVIRONMENTAL PERFORMANCE COMPARISON
MIL-PRF-55182
S-SERIES
S-SERIES
CHAR J
MAXIMUM ∆R
TYPICAL ∆R
Test Group I
Thermal Shock
Short Time Overload
± 0.2%
± 0.2%
± 0.01%
± 0.01%
± 0.002%
± 0.003%
Test Group II
Resistance Temperature
Characteristic
± 25ppm/°C
± 4.5ppm/°C
± 2.0 ppm/°C
Low Temp Storage
Low Temp Operation
Terminal Strength
± 0.15%
± 0.15%
± 0.2%
± 0.01%
± 0.01%
± 0.01%
± 0.002%
± 0.002%
± 0.002%
Test Group III
DWV
± 0.15%
± 0.1%
± 0.4%
± 0.01%
± 0.01%
± 0.05%
± 0.002%
± 0.005%
± 0.015%
Resistance to Solder Heat
Moisture Resistance
Test Group IV
Shock
± 0.2%
± 0.2%
± 0.01%
± 0.01%
± 0.002%
± 0.002%
Vibration
Test Group V
Life Test at 0.3 W/+125°C
2,000 Hours
± 0.5%
± 2.0%
± 0.015%
± 0.05%
± 0.01%
± 0.03%
10,000 Hours
Test Group Va
Life Test at 0.6W (2 x Rated Power)/+70°C, 2000 hrs.
± 0.5%
±0.015%
± 0.01%
Test Group VI
High Temperature Exposure
± 2.0%
± 0.1%
± 0.05%
Test Group VII
Voltage Coefficient
0.0005%/V
< 0.00001%/V
< 0.00001%/V
STANDARD OPERATIONS & TEST CONDITIONS
A. Standard Test Operations:
IMPROVED PERFORMANCE TESTING (IPT)
Theprecedinginformationisbasedonproductdirectlyoffthe
production line. Improved performance (meaning increased
time stability with load and other stresses) is available
through factory conducted "Improved Performance Testing".
The test routine is usually tailored to the users stabilty
objectives and product that has been screened can be
brought down to a potential load life of less than 50ppm.
By 100% Inspection
•
•
•
Short-time overload (6.25 x rated power for 5 seconds)
Resistance – tolerance check
Visual and mechanical
By Sample Inspection
•
•
TCR
Various screen test routines are available and all anticipated
stresses must be taken into account before settling on one
specific test routine. Our Applications Engineering
Department is prepared to discuss and recommend
appropriate routines given the full spectrum of anticipated
stresses and stability requirements.
Environmental tests per Table 4 on a quarterly basis to
establish performance by similarity.
B. Standard Test Conditions:
•
•
•
Lead test point: 0.5" (12.7 mm) from resistor body
Temperature: + 23°C ± 2°C
Relative humidity: per MIL-Std-202
SALES
• AMERICAS: foilsales.usa@vishay.com
• ASIA/JAPAN: foilsales.asia@vishay.com
• UK/HOLLAND/SCANDINAVIA: foilsales.eunorth@vishay.com
• GERMANY/CZECH REPUBLIC/AUSTRIA: foilsales.eucentral@vishay.com • FRANCE/SWITZERLAND/SOUTHERN EUROPE: foilsales.eusouth@vishay.com
• ISRAEL: foilsales.israel@vishay.com
For technical questions, contact: foil@vishay.com
www.vishay.com
74
Document Number: 63001
Revision 23-May-06
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1
相关型号：
S102C167R00VB
Fixed Resistor, Metal Foil, 0.6W, 167ohm, 300V, 0.005% +/-Tol, -2,2ppm/Cel, 3011,
VISHAY
S102C16K700CB
Fixed Resistor, Metal Foil, 0.6W, 16700ohm, 300V, 0.25% +/-Tol, -2,2ppm/Cel, 3011,
VISHAY
S102C17K400FB
Fixed Resistor, Metal Foil, 0.6W, 17400ohm, 300V, 1% +/-Tol, -2,2ppm/Cel, 3011,
VISHAY
S102C19K300VB
Fixed Resistor, Metal Foil, 0.6W, 19300ohm, 300V, 0.005% +/-Tol, -2,2ppm/Cel, 3011,
VISHAY
S102C19R100QB
Fixed Resistor, Metal Foil, 0.6W, 19.1ohm, 300V, 0.02% +/-Tol, -2,2ppm/Cel, 3011,
VISHAY
S102C1K6500CB
Fixed Resistor, Metal Foil, 0.6W, 1650ohm, 300V, 0.25% +/-Tol, -2,2ppm/Cel, 3011,
VISHAY
S102C20K000T
RESISTOR, METAL FOIL, 0.3 W, 0.01 %, 4.5 ppm, 20000 ohm, THROUGH HOLE MOUNT, RADIAL LEADED
VISHAY
S102C21K800AB
Fixed Resistor, Metal Foil, 0.6W, 21800ohm, 300V, 0.05% +/-Tol, -2,2ppm/Cel, 3011,
VISHAY
S102C232R00BB
Fixed Resistor, Metal Foil, 0.6W, 232ohm, 300V, 0.1% +/-Tol, -2,2ppm/Cel, 3011,
VISHAY
S102C237R00AB
Fixed Resistor, Metal Foil, 0.6W, 237ohm, 300V, 0.05% +/-Tol, -2,2ppm/Cel, 3011,
VISHAY
©2020 ICPDF网 联系我们和版权申明