SD103AWS-G [VISHAY]
Small Signal Schottky Diodes;型号: | SD103AWS-G |
厂家: | VISHAY |
描述: | Small Signal Schottky Diodes 光电二极管 |
文件: | 总5页 (文件大小:81K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SD103AWS-G, SD103BWS-G, SD103CWS-G
www.vishay.com
Vishay Semiconductors
Small Signal Schottky Diodes
FEATURES
• The SD103 series is a metal-on-silicon Schottky
barrier device which is protected by a PN
junction guardring
• The low forward voltage drop and fast switching
make it ideal for protection of MOS devices,
steering, biasing, and coupling diodes for fast
switching and low logic level applications
MECHANICAL DATA
• Other applications are click suppression,
efficient full wave bridges in telephone subsets,
and blocking diodes in rechargeable low voltage
battery systems
Case: SOD-323
Weight: approx. 4.0 mg
Packaging codes/options:
18/10K per 13" reel (8 mm tape), 10K/box
08/3K per 7" reel (8 mm tape), 15K/box
• For general purpose applications
• AEC-Q101 qualified available
• Base P/N-G3 - green, commercial grade
• Base P/N-HG3 - green, AEC-Q101 qualified
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
PARTS TABLE
PART
ORDERING CODE
INTERNAL CONSTRUCTION
TYPE MARKING
REMARKS
SD103AWS-G3-08 or SD103AWS-G3-18
SD103AWS-HG3-08 or SD103AWS-HG3-18
SD103BWS-G3-08 or SD103BWS-G3-18
SD103BWS-HG3-08 or SD103BWS-HG3-18
SD103CWS-G3-08 or SD103CWS-G3-18
SD101CWS-HG3-08 or SD101CWS-HG3-18
SD103AWS-G
Single diode
Z6
SD103BWS-G
SD103CWS-G
Single diode
Single diode
Z7
Z8
Tape and reel
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
VRRM
VRRM
VRRM
IF
VALUE
40
UNIT
V
SD103AWS-G
SD103BWS-G
SD103CWS-G
Repetitive peak reverse voltage
30
V
20
V
Forward continuous current (1)
Single cycle surge
350
2
mA
A
10 μs square wave
IFSM
Power dissipation (1)
Ptot
200
mW
Note
(1)
Valid provided that electrodes are kept at ambient temperature
THERMAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
Thermal resistance junction to ambient air (1)
TEST CONDITION
SYMBOL
RthJA
Tj
VALUE
500
UNIT
K/W
°C
Junction temperature
125
Operating temperature range
Storage temperature range
Top
-55 to +125
-55 to +150
°C
Tstg
°C
Note
(1)
Valid provided that electrodes are kept at ambient temperature
Rev. 1.4, 21-Nov-13
Document Number: 81142
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SD103AWS-G, SD103BWS-G, SD103CWS-G
www.vishay.com
Vishay Semiconductors
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
5
UNIT
μA
V
V
V
R = 30 V
R = 20 V
R = 10 V
SD103AWS-G
SD103BWS-G
SD103CWS-G
IR
IR
Leakage current
5
μA
IR
5
μA
IF = 20 mA
IF = 200 mA
VF
VF
CD
370
600
mV
mV
pF
Forward voltage drop
Diode capacitance
V
R = 0 V, f = 1 MHz
50
10
IF = IR = 50 mA to 200 mA,
recover to 0.1 IR
Reverse recovery time
trr
ns
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
1000
1000
Tamb = 125 °C
100 °C
100
100
75 °C
10
10
50 °C
25 °C
1
1
0.1
0.1
0.01
0.01
0
5
10 15 20 25 30 35 40 45 50
0
0.2
0.4
0.6
0.8
1.0
20084
VR - Reverse Voltage (V)
18488
V
F
- Forward Voltage (V)
Fig. 1 - Typical Variation of Forward Current vs. Forward Voltage
Fig. 3 - Typical Variation of Reverse Current at Various
Temperatures
100
5
t
= 300 ms
p
4
3
2
1
0
duty cycle = 2 %
10
1
0
10
20
30
40
50
0
0.5
1.0
1.5
18489
18491
V
F
- Forward Voltage (V)
V
R
- Reverse Voltage (V)
Fig. 2 - Typical High Current Forward Conduction Curve
Fig. 4 - Diode Capacitance vs. Reverse Voltage
Rev. 1.4, 21-Nov-13
Document Number: 81142
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SD103AWS-G, SD103BWS-G, SD103CWS-G
www.vishay.com
Vishay Semiconductors
50
40
100 mA
30
200 mA
I
= 400 mA
F
20
10
0
0
100
- Ambient Temperature (°C)
200
18492
T
amb
Fig. 5 - Blocking Voltage Deration vs. Temperature at Various Average Forward Currents
PACKAGE DIMENSIONS in millimeters (inches): SOD-323
0.40 (0.016)
0.25 (0.010)
1.95 (0.077)
1.60 (0.063)
Cathode bar
2.85 (0.112)
2.50 (0.098)
Foot print recommendation:
0.6 (0.024)
0.6 (0.024)
Document no.:S8-V-3910.02-001 (4)
Created - Date: 24.August.2004
Rev. 5 - Date: 23.Sept.2009
17443
1.6 (0.063)
Rev. 1.4, 21-Nov-13
Document Number: 81142
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
Document Number: 91000
1
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
SD103AWS-G3-18 SD103BWS-G3-08 SD103CWS-G3-18 SD103AWS-G3-08 SD103CWS-G3-08 SD103BWS-G3-
18
相关型号:
SD103AWS-G3-08
Rectifier Diode, Schottky, 1 Element, 0.35A, 40V V(RRM), Silicon, GREEN PACKAGE-2
VISHAY
SD103AWS-GT1
Rectifier Diode, Schottky, 1 Element, 40V V(RRM), Silicon, ROHS COMPLIANT, SOD-323, 2 PIN
SENSITRON
SD103AWS-HE3-08
Rectifier Diode, Schottky, 1 Element, 0.35A, 40V V(RRM), Silicon, ROHS COMPLIANT PACKAGE-2
VISHAY
SD103AWS-T1
Rectifier Diode, Schottky, 1 Element, 0.35A, 40V V(RRM), Silicon, ULTRA SMALL, PLASTIC PACKAGE-2
SENSITRON
SD103AWS-T1-LF
Rectifier Diode, Schottky, 1 Element, 0.35A, 40V V(RRM), Silicon, ROHS COMPLIANT, PLASTIC PACKAGE-2
WTE
SD103AWS-TP
Rectifier Diode, Schottky, 1 Element, 0.35A, 40V V(RRM), Silicon, ROHS COMPLIANT, PLASTIC PACKAGE-2
MCC
©2020 ICPDF网 联系我们和版权申明