SE10PB-E3/84A [VISHAY]
Rectifier Diode, 1 Element, 1A, 100V V(RRM),;型号: | SE10PB-E3/84A |
厂家: | VISHAY |
描述: | Rectifier Diode, 1 Element, 1A, 100V V(RRM), 二极管 |
文件: | 总4页 (文件大小:91K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SE10PB, SE10PD, SE10PG, SE10PJ
www.vishay.com
Vishay General Semiconductor
Surface Mount ESD Capability Rectifiers
FEATURES
• Very low profile - typical height of 1.0 mm
• Ideal for automated placement
• Oxide planar chip junction
• Low forward voltage drop
• Typical IR less than 0.1 μA
• ESD capability
eSMP® Series
• Meets MSL level 1, per J-STD-020, LF maximum peak of
260 °C
DO-220AA (SMP)
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
MECHANICAL DATA
IF(AV)
1.0 A
Case: DO-220AA (SMP)
Molding compound meets UL 94 V-0 flammability rating
VRRM
IR
100 V, 200 V, 400 V, 600 V
5 μA
0.86 V
Base P/N-M3
-
halogen-free, RoHS-compliant, and
VF at IF = 1.0 A
TJ max.
commercial grade
175 °C
Base P/NHM3
- halogen-free, RoHS-compliant, and
Package
DO-220AA (SMP)
Single die
automotive grade
Diode variations
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix
TYPICAL APPLICATIONS
meets JESD 201 class 2 whisker test
General purpose, polarity protection, and rail-to-rail
protection in both consumer and automotive applications.
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
SE10PB
SE10PD
10D
SE10PG
10G
SE10PJ
10J
UNIT
Device marking code
10B
Max. repetitive peak reverse voltage
Average forward current
VRRM
IF(AV)
100
200
400
600
V
A
1.0
25
Peak forward surge current 10 ms single half
sine-wave superimposed on rated load
IFSM
A
Operating junction and storage temperature range
TJ, TSTG
-55 to +175
°C
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
TYP.
0.960
0.860
-
MAX.
1.05
0.95
5.0
UNIT
TA = 25 °C
IF = 1.0 A
Max. instantaneous
forward voltage
(1)
VF
V
TA = 125 °C
TA = 25 °C
Rated VR
(2)
Max. reverse current
IR
μA
TA = 125 °C
4.8
50
IF = 0.5 A, IR = 1.0 A,
Max. reverse recovery time
Typical junction capacitance
trr
780
7.0
-
-
ns
Irr = 0.25 A
4.0 V, 1 MHz
CJ
pF
Notes
(1)
Pulse test: 300 μs pulse width, 1 % duty cycle
Pulse test: Pulse width 40 ms
(2)
Revision: 27-Jul-15
Document Number: 89024
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SE10PB, SE10PD, SE10PG, SE10PJ
www.vishay.com
Vishay General Semiconductor
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
SE10PB
SE10PD
SE10PG
SE10PJ
UNIT
(1)
RJA
105
25
(1)
Typical thermal resistance
°C/W
RJL
(1)
RJC
30
Note
(1)
Thermal resistance from junction to ambient and junction to lead mounted on PCB with 5.0 mm x 5.0 mm copper pad areas. RJL is measured
at the terminal of cathode band. RJC is measured at the top center of the body.
IMMUNITY TO ELECTRICAL STATIC DISCHARGE TO THE FOLLOWING STANDARDS
(TA = 25 °C unless otherwise noted)
STANDARD
TEST TYPE
TEST CONDITIONS
C = 100 pF, R = 1.5 k
C = 200 pF, R = 0
C = 100 pF, R = 1.5 k
C = 200 pF, R = 0
C = 150 pF, R = 330
C = 150 pF, R = 330
SYMBOL
CLASS
VALUE
> 8 kV
AEC-Q101-001
AEC-Q101-002
JESD22-A114
JESD22-A115
Human body model (contact mode)
Machine model (contact mode)
H3B
M4
3B
C
> 400 V
> 8 kV
Human body model (contact mode)
Machine model (contact mode)
VC
> 400 V
> 8 kV
Human body model (contact mode)
Human body model (air-discharge mode) (1)
4
IEC 61000-4-2 (2)
4
> 15 kV
Notes
(1) Immunity to IEC 61000-4-2 air discharge mode has a typical performance > 30 kV
(2) System ESD standard
ORDERING INFORMATION (Example)
PREFERRED P/N
SE10PJ-M3/84A
SE10PJ-M3/85A
SE10PJHM3/84A (1)
SE10PJHM3/85A (1)
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
0.024
84A
85A
84A
85A
3000
10 000
3000
7" diameter plastic tape and reel
13" diameter plastic tape and reel
7" diameter plastic tape and reel
13" diameter plastic tape and reel
0.024
0.024
0.024
10 000
Note
(1)
Automotive grade
RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted)
1.2
1.0
0.8
0.6
0.4
0.2
0
1.2
1.0
0.8
0.6
0.4
0.2
0
D = 0.8
D = 0.5
Resistive or Inductive Load
D = 0.3
D = 0.2
D = 0.1
D = 1.0
T
TL Measured
at the Cathode Band Terminal
D = tp/T
0.8
tp
0
25
50
75
100
125
150
175
0
0.2
0.4
0.6
1.0
1.2
Lead Temperature (°C)
Average Forward Current (A)
Fig. 2 - Forward Power Loss Characteristics
Fig. 1 - Max. Forward Current Derating Curve
Revision: 27-Jul-15
Document Number: 89024
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SE10PB, SE10PD, SE10PG, SE10PJ
www.vishay.com
Vishay General Semiconductor
10
100
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
TJ = 175 °C
TJ = 150 °C
10
1
TJ = 25 °C
1
0.1
0.5
0.1
0.7
0.9
1.1
1.3
1.5
0.1
1
10
100
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Fig. 3 - Forward Power Loss Characteristics
Fig. 5 - Typical Instantaneous Forward Characteristics
100
10
TJ = 175 °C
TJ = 150 °C
1
0.1
0.01
TJ = 25 °C
10
20
30
40
50
60
70
80
90 100
Percent of Rated Peak Reverse Voltage (%)
Fig. 4 - Typical Instantaneous Forward Characteristics
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-220AA (SMP)
0.012 (0.30) REF.
Cathode Band
0.086 (2.18)
0.074 (1.88)
0.053 (1.35)
0.041 (1.05)
0.036 (0.91)
0.024 (0.61)
0.142 (3.61)
0.126 (3.19)
0.158 (4.00)
0.146 (3.70)
0.103 (2.60)
0.087 (2.20)
0.032 (0.80)
0.016 (0.40)
0.025 0.030
(0.635) (0.762)
0.105
(2.67)
0.013 (0.35)
0.004 (0.10)
0.045 (1.15)
0.033 (0.85)
0.100
(2.54)
0.050
(1.27)
0.012 (0.30) 0.018 (0.45)
0.000 (0.00) 0.006 (0.15)
Revision: 27-Jul-15
Document Number: 89024
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号:
©2020 ICPDF网 联系我们和版权申明