SFH6186-3X002T [VISHAY]
Optocoupler, Phototransistor Output, Low Input Current;
| 型号： | SFH6186-3X002T |
| 厂家： | 
VISHAY |
| 描述： | Optocoupler, Phototransistor Output, Low Input Current |
| 文件： | 总8页 (文件大小：161K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SFH618A, SFH6186
Vishay Semiconductors
www.vishay.com
Optocoupler, Phototransistor Output, Low Input Current
FEATURES
• Good CTR linearity depending on forward current
• Low CTR degradation
• High collector emitter voltage, VCEO = 55 V
1
2
4
3
A
C
C
E
• Isolation test voltage, 5300 VRMS
• Low coupling capacitance
• End stackable, 0.100" (2.54 mm) spacing
• High common mode transient immunity
1
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
• Telecom
i179061-1
1
• Industrial controls
• Battery powered equipment
• Office machines
DESCRIPTION
The SFH618A (DIP) and SFH6186 (SMD) feature a high
current transfer ratio, low coupling capacitance and high
isolation voltage. These couplers have a GaAs infrared
diode emitter, which is optically coupled to silicon planar
phototransistor detector, and is incorporated in a plastic
DIP-4 or SMD package.
AGENCY APPROVALS
The safety application model number covering all products
in this datasheet is SFH618A. This model number should be
used when consulting safety agency documents.
The coupling devices are designed for signal transmission
between two electrically separated circuits.The couplers are
end-stackable with 2.54 mm lead spacing. Creepage and
clearance distances of > 8 mm achieved with option 6.
• UL1577, file no. E52744 system code H or J, double
protection
• CSA 93751
• DIN EN 60747-5-5 (VDE 0884-5) available with option 1
• BSI IEC 60950; IEC 60065
• FIMKO
ORDERING INFORMATION
Option 6
DIP-#
S
F
H
6
1
8
#
-
#
X
0
#
#
T
7.62 mm
Option 7
10.16 mm
Option 9
PART NUMBER
CTR
BIN
PACKAGE OPTION
TAPE
AND
REEL
> 0.1 mm
> 0.7 mm
CTR (%)
1 mA
AGENCY
CERTIFIED/PACKAGE
UL, CUL
DIP-4
63 to 125
SFH618A-2
100 to 200
SFH618A-3
160 to 320
SFH618A-4
250 to 500
SFH618A-5
-
DIP-4, 400 mil, option 6
SMD-4, option 7
-
-
SFH618A-3X006
-
-
-
SFH618A-5X007T (1)
SFH6186-3T (1), SFH6186-3T1 (2)
SFH6186-3X002T (1)
,
SFH6186-5T (1)
,
SMD-4, option 9
SFH6186-2T (1)
SFH6186-4T (1)
SFH6186-5T1 (2)
250 to 500
VDE, UL, CUL
DIP-4
63 to 125
100 to 200
160 to 320
-
-
-
-
SFH618A-3X001
SFH618A-3X016
SFH618A-3X017T (1)
SFH6186-3X001T (1)
SFH618A-4X001
SFH618A-4X016
-
-
DIP-4, 400 mil, option 6
SMD-4, option 7
SMD-4, option 9
SFH618A-5X016
SFH618A-5X017T (1)
SFH6186-5X001T (1)
SFH6186-4X001T
Notes
•
Additional options may be possible, please contact sales office
Also available in tubes, do not put T to the end
(1)
(2)
Product is rotated 90° in tape and reel cavity
Rev. 2.6, 31-Aug-15
Document Number: 83673
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH618A, SFH6186
Vishay Semiconductors
www.vishay.com
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
Reverse voltage
Power dissipation
Forward current
OUTPUT
VR
Pdiss
IF
6
V
70
60
mW
mA
Collector emitter voltage
Emitter collector voltage
VCEO
VECO
IC
55
7
V
V
50
mA
mA
mW
Collector current
tp ≤ 1 ms
IC
100
150
Power dissipation
Pdiss
COUPLER
Storage temperature range
Ambient temperature range
Junction temperature
Tstg
Tamb
Tj
-55 to +150
-55 to +100
125
°C
°C
°C
max. 10 s, dip soldering distance
Soldering temperature (1)
Tsld
260
°C
to seating plane ≥ 1.5 mm
Notes
•
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through
hole devices (DIP).
(1)
200
150
Detector
100
LED
50
0
0
20
40
60
80 100 120
T
amb
- Ambient Temperature (°C)
Fig. 1 - Permissible Power Dissipation vs. Ambient Temperature
Rev. 2.6, 31-Aug-15
Document Number: 83673
2
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH618A, SFH6186
Vishay Semiconductors
www.vishay.com
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
INPUT
Forward voltage
Reverse current
Capacitance
IF = 5 mA
VF
IR
1.1
0.01
25
1.5
10
V
μA
V
R = 6 V
V
R = 0 V, f = 1 MHz
CO
Rthja
pF
Thermal resistance
OUTPUT
1070
K/W
Collector emitter leakage current
Collector emitter capacitance
Thermal resistance
COUPLER
V
CE = 10 V
ICEO
CCE
Rthja
10
7
200
nA
pF
V
CE = 5 V, f = 1 MHz
500
K/W
SFH618A-2
SFH6186-2
SFH618A-3
SFH6186-3
SFH618A-4
SFH6186-4
SFH618A-5
SFH6186-5
VCEsat
VCEsat
VCEsat
VCEsat
VCEsat
VCEsat
VCEsat
VCEsat
CC
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.25
0.4
0.4
0.4
0.4
0.4
0.4
0.4
0.4
V
V
IC = 0.32 mA, IF = 1 mA
IC = 0.5 mA, IF = 1 mA
IC = 0.8 mA, IF = 1 mA
IC = 1.25 mA, IF = 1 mA
V
V
Collector emitter saturation voltage
V
V
V
V
Coupling capacitance
pF
Note
•
Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
CTR
MIN.
63
TYP.
MAX.
125
UNIT
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
%
SFH618A-2
SFH6186-2
SFH618A-2
SFH6186-2
SFH618A-3
SFH6186-3
SFH618A-3
SFH6186-3
SFH618A-4
SFH6186-4
SFH618A-4
SFH6186-4
SFH618A-5
SFH6186-5
SFH618A-5
SFH6186-5
IF = 1 mA, VCE = 0.5 V
63
125
32
75
75
IF = 0.5 mA, VCE = 1.5 V
IF = 1 mA, VCE = 0.5 V
IF = 0.5 mA, VCE = 1.5 V
IF = 1 mA, VCE = 0.5 V
IF = 0.5 mA, VCE = 1.5 V
IF = 1 mA, VCE = 0.5 V
IF = 0.5 mA, VCE = 1.5 V
32
100
100
50
200
200
120
120
50
IC/IF
160
160
80
320
320
200
200
80
250
250
125
125
500
500
300
300
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
Turn on time
Rise time
TEST CONDITION
SYMBOL
MIN.
TYP.
6
MAX.
UNIT
μs
V
V
V
V
CC = 5 V, IC = 2 mA, RL = 100 Ω
CC = 5 V, IC = 2 mA, RL = 100 Ω
CC = 5 V, IC = 2 mA, RL = 100 Ω
CC = 5 V, IC = 2 mA, RL = 100 Ω
ton
tr
3.5
5.5
5
μs
Turn off time
Fall time
toff
tf
μs
μs
Rev. 2.6, 31-Aug-15
Document Number: 83673
3
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH618A, SFH6186
Vishay Semiconductors
www.vishay.com
V
= 5 V
CC
Input pulse
Input
R
L
10 %
90 %
V
OUT
Output pulse
t
t
t
r
f
t
on
off
isfh618a_10
isfh618a_12
Fig. 2 - Test Circuit
Fig. 3 - Test Circuit and Waveforms
SAFETY AND INSULATION RATINGS
PARAMETER
TEST CONDITION
SYMBOL
VALUE
55/115/21
2
UNIT
Climatic classification
According to IEC 68 part 1
According to DIN VDE 0109
Insulation group IIIa
Pollution degree
Comparative tracking index
CTI
VISO
VISO
VIOTM
VIORM
RIO
175
Maximum rated withstanding isolation voltage
Tested withstanding isolation voltage
Maximum transient isolation voltage
Maximum repetitive peak isolation voltage
According to UL1577, t = 1 min
According to UL1577, t = 1 s
According to DIN EN 60747-5-5
According to DIN EN 60747-5-5
4470
5300
8000
890
≥ 1012
≥ 1011
700
VRMS
VRMS
Vpeak
Vpeak
Ω
Ω
mW
mA
T
amb = 25 °C, VIO = 500 V
Isolation resistance
Tamb = 100 °C, VIO = 500 V
RIO
Output safety power
Input safety current
Input safety temperature
Creepage distance
Clearance distance
Creepage distance
Clearance distance
Creepage distance
Clearance distance
Insulation thickness
PSO
ISI
400
TS
175
°C
DIP-4
≥ 7
≥ 7
≥ 8
≥ 8
≥ 7
≥ 7
≥ 0.4
mm
mm
mm
mm
mm
mm
mm
DIP-4
DIP-4, 400 mil, option 6
DIP-4, 400 mil, option 6
SMD-4, option 7 and option 9
SMD-4, option 7 and option 9
DTI
Note
•
As per DIN EN 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance
with the safety ratings shall be ensured by means of protective circuits.
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
280
240
200
160
120
80
280
240
200
160
120
80
V
= 0.5 V, C = f (T )
TR A
CE
I
= 5mA
I
= 5mA
F
F
I
= 2mA
= 1mA
I
I
= 2mA
= 1mA
F
F
F
F
I
40
40
I
= 0.5mA
80 100
I
= 0.5mA
80 100
F
F
0
0
- 40 - 20
0
20
40
(°C)
60
- 40 - 20
0
20
40
(°C)
60
T
T
A
A
isfh618a_01
isfh618a_02
Fig. 4 - Current Transfer Ratio (typ.)
Rev. 2.6, 31-Aug-15
Fig. 5 - Current Transfer Ratio (typ.)
Document Number: 83673
4
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH618A, SFH6186
Vishay Semiconductors
www.vishay.com
1.2
1.15
1.1
12
10
8
I
F = 5 mA
T
C
= 25 ºC,
= f
T
= 25 ºC, V = f (I )
A
E
A
F
F
(V , I )
CE
F
1.05
1
6
I
4
F = 2 mA
0.95
0.9
2
I
I
F = 1 mA
F = 0.5 mA
0
-2
-1
0
1
2
10-1
100
I
101
10
10
10
V
10
10
(mA)
(V)
F
CE
isfh618a_06
isfh618a_03
Fig. 6 - Diode Forward Voltage (typ.)
Fig. 9 - Output Characteristics
1.2
103
102
101
100
I
= 1.0 mA, V = f (T )
F A
F
1.15
1.1
1.05
1
t off
t
F
t
on
t
R
T
V
t
= 25 ºC, I = 1.0 mA,
F
A
0.95
= 5.0 V, t , t
,
R
CC
OFF
ON
L
, t , = f (R )
F
0
102
103
104
(Ω)
105
- 40 - 20
0
20
40
(°C)
60
80 100
T
R
A
L
isfh618a_09
isfh618a_04
Fig. 7 - Diode Forward Voltage (typ.)
Fig. 10 - Switching Times (typ.)
20
T
C
= 25 ºC, f = 1.0 MHz
A
= f (V
)
EE
CE
16
12
8
4
0
10-2
10-1
100
101
102
V
(V)
CE
isfh618a_05
Fig. 8 - Transistor Capacitance
Rev. 2.6, 31-Aug-15
Document Number: 83673
5
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH618A, SFH6186
Vishay Semiconductors
www.vishay.com
PACKAGE DIMENSIONS in millimeters
2
1
Pin one ID
6.48
6.81
ISO method A
3
4
4.55
4.83
7.62 typ.
0.79 typ.
0.76
1.14
1.27 typ.
3.30
3.81
5.84
6.35
10°
4°
2.79
3.30
typ.
0.508
0.89
0° to 15°
0.2
0.3
0.46
0.56
1.27
i178027
2.54
SMD
0.76
Pin one ID
R 0.25
2.54
1.78
6.48
6.81
1.52
8
min.
11.05
3
4
9.52
10.03
4.55
4.83
7.52
7.90
0.76
1.14
0.79 typ.
10°
3.30
3.81
0.25 typ.
ISO method A
8 min.
0.249
0.102
4° typ.
3° to 7°
2.54 typ.
1.27 typ.
0.508
1.020
Lead
coplanarity
0.004 max.
i178029
Option 6
Option 7
Option 9 or SFH6186
10.36
9.53
7.62 typ.
10.03
7.62 ref.
9.96
7.8
7.4
4.6
4.1
0.102
0.249
0.30 typ.
15° max.
0.7
8 min.
0.51
1.02
8.4 min.
0.35
0.25
10.3 max.
10.16
10.92
0.76
0.76
R0.25
R0.25
2.54
2.54
1.78
1.52
1.78
8 min.
11.05
8 min.
11.05
1.52
18450-11
PACKAGE MARKING (example)
YWW 68
SFH618A-3
V
Rev. 2.6, 31-Aug-15
Document Number: 83673
6
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SFH618A, SFH6186
Vishay Semiconductors
www.vishay.com
SOLDER PROFILES
HANDLING AND STORAGE CONDITIONS
ESD level: HBM class 2
300
5 s
Floor life: unlimited
Lead temperature
250
Conditions: Tamb < 30 °C, RH < 85 %
Moisture sensitivity level 1, according to J-STD-020
235 °C to
260 °C
full line: typical
dotted line:
process limits
second
wave
first wave
200
150
100
wave
ca. 200 K/s
ca. 2 K/s
100 °C to
130 °C
2 K/s
forced cooling
ca. 5 K/s
50
0
0
50
100
150
200
250
94 8626
Time (s)
Fig. 11 - Wave Soldering Double Wave Profile According to
J-STD-020 for DIP-8 Devices
300
max. 260 °C
255 °C
250
200
150
100
50
245 °C
240 °C
217 °C
max. 30 s
max. 100 s
max. 120 s
max. ramp down 6 °C/s
max. ramp up 3 °C/s
0
0
50
100
150
200
250
300
19841
Time (s)
Fig. 12 - Lead (Pb)-free Reflow Solder Profile According to
J-STD-020 for SMD-8 Devices
Rev. 2.6, 31-Aug-15
Document Number: 83673
7
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
Document Number: 91000
1
相关型号：
SFH6186-4X001
Optocoupler - Transistor Output, 1 CHANNEL TRANSISTOR OUTPUT OPTOCOUPLER, ROHS COMPLIANT, PLASTIC, SMD, 4 PIN
VISHAY
©2020 ICPDF网 联系我们和版权申明